Whirlpool Freezer Elements and Burners
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Whirlpool Freezer Elements and Burners
Whirlpool Freezer Defrost Heater
PartSelect Number PS11752658
Manufacturer Part Number WPW10316428
This defrost heater element is for refrigerators and helps melt frost from the evaporator fins during the automatic defrost cycle. Before installing, unplug the refrigerator to avoid electrical hazards and store any perishable food safely. Wearing work gloves is recommended for safety. Confirm compatibility with your refrigerator model.
Fixes these symptoms
- Freezer not defrosting
- Frost buildup
- See more...
Your Price
$80.82
In Stock
Whirlpool Freezer Refrigerator Defrost Heater
B. turn off frig with dial in main compartment, then pull frig out away from wall and unplug and remove the cover ( It is located at the bottom of the frig and may be cardboard and contains a handfull of 1/4" screws) exposing the compressor and drain tube (this is a good time to vacume the compressor and coil area)
c. Take false back off from freezer by removing two 1/4 inch screws.
Next,
1. we made sure that the drain tube that runs down to a drain pan near the evaporator coil was clear, we did this by using a small aount of rock salt to speed up the melting of the ice then poured small amounts of hot water (boiling into the drain hole and soon the water flowed down the tube and into the pan below.
2. We then pushed a #12 standed electrical wire (with its end stripped back 1-1/2" then folding the strands back to create a broom) down the tube to the pan to push out any debree that may be present i.e. tin foil plastic bag particles, food chunks etc.
Making sure that this drain tube is clear is the first thing that could be causing the ice build up and water in the lower compartment!
However, I performed this several times and didn't change the problem so I chose to change the parts associated with defrost:
1. defrost heater, which is very easy to change. it is mostly plug and play but does require a pair of needle nose pliers to open a couple of metal fins to remove heater from its mounts, just be gentle with the process.
2. defrost thermostat, which is also very easy to change (Simply pull it off of a copper tube) but requires you to cut two wires near the old part and wire nut the new part wires to the remaining original wires, I added some anti oxident to the wires inside the wire nut to prevent a bad connection from developing do to moisture in this area (You can buy wire nuts with this already inside them, do this)and I taped the wire nut with a few inches of ELECTRICAL TAPE CLOSING OFF THE OPENING OF THE WIRE NUT.
You can then put his cabinet back together!
3. I also decided to change the defrost timer which is located inside a cover where the frig temperture setting dial is located. It is held to this cover by two phillips screws the cover is held in place by one 1/4" screw.
once you have the cover off and the defrost timer unscrewed you must remove a plug from the timer!
Now if you got the exact part you simply reinstall the defrost timer plug in the same postion on the new timer and screw the timer back onto its mount etc. However you may need to determine if the new timer is in the "DEFROST" position and you will need to take it out of that position by I assume rotating the timer mechanism (Ask a tech person about this)!!!!!!!!!
Then with all that done plug your frig vack in reposition it turn it on and be proud of yourself.
Now, if you recieved the timer I did it may look the same as the old one, but it may contain a black wire!!!
You will need to know which type of defrost timer application you frig uses:
1. Continuous run
2. version 1 Cumulative compressor run.
or
3. version 2 Cumulative compressor run.
I found a wiring diagram folded up and stored in the grill in the bottom of the front of the frig that helped me determine this. you will need to be able to read a wiring diagram but I found this situation to be simply a matter of matching examples of pictures (line diagrams). It is important though as you must determine which timer application your frig has because the black wire must be placed on a certain terminal for proper operation.
I replaced a three parts and may have, through trouble shooting, been able to save some money by not replacing all these parts. However , I found that when I went for guidance on trouble shooting that i.e. with the heater that ohmic values of the old part may be near the new part that it may still not be conclusive!? so for a hundred bucks my frig may last 5-10 Read more...
PartSelect Number PS11740357
Manufacturer Part Number WP2315530
The defrost heater keeps the cooling coils from frosting over.
Fixes these symptoms
- Freezer not defrosting
- Fridge too warm
- Frost buildup
- See more...
Installation Instructions
Teri from West Valley City, UT
We were getting ice forming in the freezer compartment and water in the frig compartment
A. remove food from freezer and store in cooler etc.B. turn off frig with dial in main compartment, then pull frig out away from wall and unplug and remove the cover ( It is located at the bottom of the frig and may be cardboard and contains a handfull of 1/4" screws) exposing the compressor and drain tube (this is a good time to vacume the compressor and coil area)
c. Take false back off from freezer by removing two 1/4 inch screws.
Next,
1. we made sure that the drain tube that runs down to a drain pan near the evaporator coil was clear, we did this by using a small aount of rock salt to speed up the melting of the ice then poured small amounts of hot water (boiling into the drain hole and soon the water flowed down the tube and into the pan below.
2. We then pushed a #12 standed electrical wire (with its end stripped back 1-1/2" then folding the strands back to create a broom) down the tube to the pan to push out any debree that may be present i.e. tin foil plastic bag particles, food chunks etc.
Making sure that this drain tube is clear is the first thing that could be causing the ice build up and water in the lower compartment!
However, I performed this several times and didn't change the problem so I chose to change the parts associated with defrost:
1. defrost heater, which is very easy to change. it is mostly plug and play but does require a pair of needle nose pliers to open a couple of metal fins to remove heater from its mounts, just be gentle with the process.
2. defrost thermostat, which is also very easy to change (Simply pull it off of a copper tube) but requires you to cut two wires near the old part and wire nut the new part wires to the remaining original wires, I added some anti oxident to the wires inside the wire nut to prevent a bad connection from developing do to moisture in this area (You can buy wire nuts with this already inside them, do this)and I taped the wire nut with a few inches of ELECTRICAL TAPE CLOSING OFF THE OPENING OF THE WIRE NUT.
You can then put his cabinet back together!
3. I also decided to change the defrost timer which is located inside a cover where the frig temperture setting dial is located. It is held to this cover by two phillips screws the cover is held in place by one 1/4" screw.
once you have the cover off and the defrost timer unscrewed you must remove a plug from the timer!
Now if you got the exact part you simply reinstall the defrost timer plug in the same postion on the new timer and screw the timer back onto its mount etc. However you may need to determine if the new timer is in the "DEFROST" position and you will need to take it out of that position by I assume rotating the timer mechanism (Ask a tech person about this)!!!!!!!!!
Then with all that done plug your frig vack in reposition it turn it on and be proud of yourself.
Now, if you recieved the timer I did it may look the same as the old one, but it may contain a black wire!!!
You will need to know which type of defrost timer application you frig uses:
1. Continuous run
2. version 1 Cumulative compressor run.
or
3. version 2 Cumulative compressor run.
I found a wiring diagram folded up and stored in the grill in the bottom of the front of the frig that helped me determine this. you will need to be able to read a wiring diagram but I found this situation to be simply a matter of matching examples of pictures (line diagrams). It is important though as you must determine which timer application your frig has because the black wire must be placed on a certain terminal for proper operation.
I replaced a three parts and may have, through trouble shooting, been able to save some money by not replacing all these parts. However , I found that when I went for guidance on trouble shooting that i.e. with the heater that ohmic values of the old part may be near the new part that it may still not be conclusive!? so for a hundred bucks my frig may last 5-10 Read more...
Whirlpool Freezer Refrigeration Appliance Defrost Heater
PartSelect Number PS12348390
Manufacturer Part Number W11175809
This defrost heater part number W11175809) is for refrigeration appliances.
The defrost heater melts frost from the evaporator fins during the automatic defrost cycle.
Safely store any food that could deteriorate while the power is off and unplug the appliance before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
- Frost buildup
- See more...
Whirlpool Freezer Defrost Heater Assembly
PartSelect Number PS11740632
Manufacturer Part Number WP3-82089-001
The defrost heater is similar to the burners on an electric stove. It's located just beneath the cooling coils, which are concealed behind a panel in the freezer compartment. The heater gets hot. And, because it's close to the cooling coils, any ice or frost build-up melts.
Fixes these symptoms
- Frost buildup
- See more...
Installation Instructions
David from BURNEY, CA
The glass tube that encases the heater element was broken
Unplug Freezer, Remove the panel that covers the evaporative coil assembly (4 Screws). Unplug the heater wires (quick disconnects). Bend the metal tabs at each end of the heater to allow removal. Remove heater & place new heater in it's place. Bend metal tabs around heater to secure it. Route heater wires in the same manner as the old heater. Reconnect heater wires. Install the panel. Plug it in & you're done. Easy!
Read more...
Whirlpool Freezer Defrost Heater
PartSelect Number PS990119
Manufacturer Part Number 8201749
The defrost heater keeps the cooling coils from frosting over.
Fixes these symptoms
- Frost buildup
- See more...
Whirlpool Freezer Heater
PartSelect Number PS11755529
Manufacturer Part Number WPW10486820
This heater is a replacement heating component designed to produce consistent heat during operation. It is commonly replaced when heating performance declines or stops entirely.
Whirlpool Freezer Heater
PartSelect Number PS11740627
Manufacturer Part Number WP3-80405-003
Presenting the authentic OEM Whirlpool Heater, tailored for optimal compatibility with various Whirlpool models. The offering specializes in providing up-to-the-mark performance in melts frost operations in the automatic defrost cycle. Made with precision, this defrost heater, despite having similarities with other parts, boasts unique size and shape elements to seamlessly fit your requirements. Prior to installation, ensure that the freezer is unplugged, and any perishable food items have been securely stored elsewhere. It is recommended to wear work gloves during the installation process to safeguard your hands. Enjoy unparalleled efficiency and reliability with our Whirlpool Defrost Heater.
Related Whirlpool Freezer Parts
- All Whirlpool Freezer parts
- Whirlpool Freezer Caps and Lids
- Whirlpool Freezer Circuit Boards and Touch Pads
- Whirlpool Freezer Compressors
- Whirlpool Freezer Handles
- Whirlpool Freezer Hardware
- Whirlpool Freezer Hinges
- Whirlpool Freezer Hoses and Tubes
- Whirlpool Freezer Latches
- Whirlpool Freezer Lights and Bulbs
- Whirlpool Freezer Motors
- Whirlpool Freezer Seals and Gaskets
- Whirlpool Freezer Switches
- Whirlpool Freezer Thermostats
- Whirlpool Freezer Trays and Shelves
- Whirlpool Freezer Wheels and Rollers
- Whirlpool Freezer Wire Plugs and Connectors