Whirlpool Freezer Seals and Gaskets
Find your part
Enter your model number or a part number and click "Search"
Popular Whirlpool Freezer Seals and Gaskets
Your Price
$115.25
Oven Door Seal
Once the old seal is out, insert the new one using the wire embedded in the seal as your guide...the gap in the seal goes to the bottom. Put everything back together and re-install the door. My door hinges were spring loaded and took a little effort to move them down so the door can be slipped on. This is a two person job since the hinges do not lock in place, they spring right back up flush with the oven and you cannot install the door. Re-install the two set screws holding the door to the hinges and you are done!
With the new seal in place, it felt a little puffy and the door did not seem to close as flush as it used to. This makes sense since the seal is new. I kept the door locked (like you would to use the oven cleaning cycle). I even kept it partially locked during cooking.
Frankly, the hardest part was the cleanup of nasty grease and dirt that built up over the past decade or so.
Best of luck! Read more...
PartSelect Number PS11757564
Manufacturer Part Number WPY702338
This oven door seal prevents heat from escaping the oven cavity when in use.
Fixes these symptoms
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Paul from Mickleton, NJ
The oven door seal was ripped and was leaking.
The oven seal replacement was very straight forward. Two screws held the door to the arms coming from the oven. I slid the door up off the arm and moved it to a workbench. This whole process should take about 15 minutes, a little longer if your unit is older and you want to clean as you go. Mine was fairly dirty and I gave it a cleaning as I removed parts. Unscrew all screws on the outer frame of the door, including two small ones on the side. Remove the outer frame and then the glass front and set them aside. A few more screws to remove the glass from the inner door, and even more on the remaining part of the door. You should also remove the screws holding the tiny brackets as well to release the portion that holds the oven seal in place. This is very straightforward, just keep pulling screws out until you can remove the old seal.Once the old seal is out, insert the new one using the wire embedded in the seal as your guide...the gap in the seal goes to the bottom. Put everything back together and re-install the door. My door hinges were spring loaded and took a little effort to move them down so the door can be slipped on. This is a two person job since the hinges do not lock in place, they spring right back up flush with the oven and you cannot install the door. Re-install the two set screws holding the door to the hinges and you are done!
With the new seal in place, it felt a little puffy and the door did not seem to close as flush as it used to. This makes sense since the seal is new. I kept the door locked (like you would to use the oven cleaning cycle). I even kept it partially locked during cooking.
Frankly, the hardest part was the cleanup of nasty grease and dirt that built up over the past decade or so.
Best of luck! Read more...
Your Price
$219.59
Door Gasket - Black
PartSelect Number PS326951
Manufacturer Part Number 2177311
This is a magnetic door gasket. This door gasket is used to make an air-tight seal for the cabinet when the door is closed.
Fixes these symptoms
- Door won’t open or close
- See more...
Your Price
$185.31
Freezer Magnetic Door Gasket - Black
PartSelect Number PS326950
Manufacturer Part Number 2177310
This black door gasket is used to make an air-tight seal for the cabinet when the door is closed.
Installation Instructions
Robert from Aston, PA
too much frost in freezer
pulled out gasket and then had to put new gasket in place. Took door off laid it on the kitchen table. Used the small rounded end scissors so that the gasket would get perforated.
Read more...
Your Price
$221.27
Door Gasket
PartSelect Number PS328679
Manufacturer Part Number 2188436A
This white door gasket is used to make an air-tight seal for the cabinet when the door is closed.
Fixes these symptoms
- Frost buildup
- See more...
Installation Instructions
Nancy from Vernon, TX
Needed new gasket for doorknob
Brought the inside of the door in tbe house were it was warm. Put gasket on keep inside over night. Screwed frame back on but won't close tigbt so used bungecords to pull tight. Plugged in frezzer left over night next morn took off cord and it sealed great.
Read more...
Your Price
$223.84
Door Gasket
PartSelect Number PS328681
Manufacturer Part Number 2188438A
This door gasket is used to seal the freezer door when closed.
Installation Instructions
Vernon from Clayton, NC
The old door gasket was hard and frequently didn't seal and caused evaperator to ice up and contents of freezer to thaw out.
Using a nut driver on a cordless drill I took out the screws that held the metal strips on, which held the seal in place. I installed the new seal with a hand driven nut driver so as not to strip the screw holes in the door. It came out well and the new seal works very well. Getting the seal positioned properly was the most tedious part.
Read more...
Your Price
$47.14
Silicone Rubber Adhesive - 2 oz
PartSelect Number PS11740605
Manufacturer Part Number WP279368
Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any internal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.
Your Price
$215.70
Door Gasket
PartSelect Number PS328682
Manufacturer Part Number 2188439A
This door gasket is used to seal the freezer door when closed.
Fixes these symptoms
- Frost buildup
- See more...
Installation Instructions
Elizabeth from Sparta, IL
Freezer door allowing more frost build-up than normal
My husband took off the old gasket and replaced it with the new one. The old gasket was split in several places, and actually, since the freezer is about 27 years old, I didn't think we could find a gasket at all. I'm still not sure that it is sealing as it should since I don't hear the sound that indicated pressurizing. During storage and/or shipping, the gasket had developed a kink in it. I did lay it out on the floor in hopes the kink would straighten out some, which it sort of did. We plan to do just a little more adjusting to the hinge in hope that finishes the problem.
Read more...
Your Price
$163.56
Freezer Lid Gasket
PartSelect Number PS2578476
Manufacturer Part Number 4-35260-006
The freezer lid gasket creates a seal around the lid to prevent warm air from entering the freezer.
Your Price
$317.17
Door Gasket - White
PartSelect Number PS11742413
Manufacturer Part Number WP4357142
This white door gasket is used to make an air-tight seal for the cabinet when the door is closed.
Installation Instructions
Floyd from Fayetteville, PA
door gasket was bad and the freezer would frost up
Removed the door and removed the inside cover and replaced the old gasket with the new one.
Read more...
Related Parts
- All Whirlpool Freezer parts
- Whirlpool Freezer Compressors
- Whirlpool Freezer Grilles and Kickplates
- Whirlpool Freezer Handles
- Whirlpool Freezer Hardware
- Whirlpool Freezer Hinges
- Whirlpool Freezer Hoses and Tubes
- Whirlpool Freezer Switches
- Whirlpool Freezer Thermostats
- Whirlpool Freezer Trays and Shelves
