Ridgid Tile Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Ridgid Tile Saw Parts
Your Price
$6.40
In Stock
Ridgid Tile Saw Assembly Carbon Brush
PartSelect Number PS18693574
Manufacturer Part Number 291131002
This is a genuine OEM sourced replacement part designed for use with Ridgid tile saws. This assembly includes one (1) carbon brush with a lead wire and a spring attached. Please note brush holder is sold separately. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • First remove brush caps • Take out old brushes and replace them with new ones • Secure brush caps
Your Price
$6.40
Special Order
Your Price
$6.40
In Stock
Ridgid Tile Saw Carbon Brush
PartSelect Number PS16235687
Manufacturer Part Number 080015001641
This is a genuine OEM sourced replacement part designed for use with Ryobi saws. This assembly includes one (1) carbon brush with a lead wire and a spring attached. Please note brush holder is sold separately. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • First remove the cover • Take our old brushes and replace them with the new ones • Secure the cover and test the tool
Your Price
$6.40
In Stock
Ridgid Tile Saw Guide Roller
PartSelect Number PS10098225
Manufacturer Part Number 524822001
It is a high-quality component which is designed for use with Ridgid tile saws. The part is supplied directly from the original equipment manufacturer. This is one of the special guide rollers that allow table assembly to move back and forth on the rails. Unfortunately, over time the part may wear out, get damaged or even lost eventually requiring a replacement to maintain a properly functioning equipment. It is made of durable plastic material and is sold as an individual component. Note, the hardware to secure it is not included and is sold separately. To replace it, you will need a properly sized wrench.
Your Price
$6.40
On Order
Ridgid Tile Saw Elevating Shaft (3/8-16 X 137
PartSelect Number PS10077070
Manufacturer Part Number 089037007042
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Ryobi table saws. This is an identical replacement for a missing or worn elevating shaft that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your unit for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.
Your Price
$6.30
In Stock
Ridgid Tile Saw Ball Bearing (6201 Zlu C3 Srl/p6 Z3 V3)
PartSelect Number PS16237257
Manufacturer Part Number 089110101209
This replacement bearing is an authentic component which is supplied directly from the original equipment manufacturer for use with Ryobi table saws. Bearings are used to reduce friction between rotating parts, please make sure to check appropriate diagrams of your unit for the correct location and use of this hardware. Over time bearings tend to wear out and may begin to fail eventually requiring replacement to maintain peak performance. This part is made of high-quality metal and it is sold individually.
Your Price
$6.40
In Stock
Ridgid Tile Saw Brush Holder
PartSelect Number PS10077077
Manufacturer Part Number 089037007050
This durable plastic brush holder is an authentic OEM sourced item that is sold individually. It is a high quality item that is specially designed for Ryobi table saws. The purpose of this holder is to secure carbon brush in an electric power tool.
Your Price
$6.40
On Order
Ridgid Tile Saw C-ring
PartSelect Number PS10077057
Manufacturer Part Number 089037007029
This is an authentic OEM sourced component which is specially made for use with Kawasaki engines commonly installed on lawn and garden equipment. The part provides an identical replacement for a missing or a faulty c-ring that was installed on a new unit. This high-quality hardware is utilized to secure the block, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this c-ring. Keep in mind this high-quality part is made of durable metal and is sold individually.
Your Price
$6.40
On Order
Your Price
$6.40
In Stock
Ridgid Tile Saw Ball Bearing (6001zz)
PartSelect Number PS11855727
Manufacturer Part Number 089040002009
This is a genuine OEM ball bearing. It is compatible with various Ryobi, Ridgid, and MK Diamond power tools including saws and trimmers. Ball bearings prevent damage to rotating parts by reducing friction and securing positioning. They are high wear components and commonly need replacement with regular use. Sold individually.
Ridgid Tile Saw Appliance Types
Popular Ridgid Tile Saw Models
Below are the most popular Ridgid Tile Saw models we have. Enter your model number in the search box to find your model.
- R4040 Tile Saw
- R4030 Tile Saw
- R4040S Tile Saw
- R4007 7 Inch Tile Saw
- R4020 7" Ridgid Portable Job Site Wet Tile Saw
- R4030S 7" Job Site Tile Saw with Laser
- R4010 Tile Saw
- R4090 10" Tile Saw
- RTS10G 10 In. Tile Saw 3-8-17 (Rev:04)
- R4010TR 10 in. Tile Saw
- R4031 Tile Saw
- R40211 Tile Saw
- R40311 Tile Saw
- R4021 Tile Saw 7-2-18 (Rev:03)
- AC11303 Tile Saw Stand
- R4021SN Tile Saw 7-2-18 (Rev:03)
- R4021S1 Tile Saw 6-29-18 (Rev:01)
- AC11305 Tile Saw Stand