Refrigerator Circuit Boards and Touch Pads
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Refrigerator Circuit Boards and Touch Pads
Your Price
$37.91
In Stock
Refrigerator Led Light Control Board
PartSelect Number PS11755867
Manufacturer Part Number WPW10515058
This 2-plug LED light control board is a genuine OEM replacement part designed for refrigerators. It fits into the fresh food section of the refrigerator. The LED light helps users easily see the contents of the fridge, even in low-light conditions. LED lights are a popular choice due to their energy efficiency, longer lifespan, and ability to produce bright and consistent lighting. Compared to traditional incandescent or fluorescent lights, LED lights consume less energy, generate less heat, and have a much longer operational lifespan, making them a preferred choice-
Fixes these symptoms
- Light not working
- See more...
Installation Instructions
Edward from UNIVERSITY PL, WA
Central light board flashed periodically then quit
I began by replacing the central light board by using a plastic non-marring wedge type tool slipping it between the housing and the retainers to release the latch like catch. Then I removed the lightboard and light cover assembly by depressing the latch like retainers for the two wire connectors. Installation was as simple as snapping the wires into the connectors and then pushing the lightboard and light cover assembly into place. One major note: I learned from a repairman that you cannot resolve the problem by simply replacing the central lightboard. you must replace all three lightboards, the two in the refrigerator and the one in the freezer because unless you can absolutely identify which board is causing the fault, it will continue to cause a problem on the main board and the lights will not work. Replacing the other two boards is the same as the central board. Additional comment to consider: I absolutely fail top see how this design of using three circuit boards for a simple light saves me anything; in fact after only 5 years it has cost me in excess of $400 (or 20% of the original cost of the unit) just in materials for a simple light--absurd, ridiculous design. If it burns out again I will have an appliance repairman install a simple 1950's design switch a small LED bulb which will probably last longer than the unit.
Read more...
Your Price
$115.62
In Stock
Refrigerator Ice Maker Assembly
PartSelect Number PS17215831
Manufacturer Part Number W11658802
The ice maker includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- See more...
Your Price
$157.79
In Stock
Refrigerator Electronic Control Board
PartSelect Number PS11755733
Manufacturer Part Number WPW10503278
The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem. The tools needed for this installation project is a small flat blade screwdriver. *Please note: the board will need to be programmed after installation. Remember to unplug refrigerator from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.
Fixes these symptoms
- Freezer not defrosting
- Freezer section too warm
- Freezer too cold
- See more...
Installation Instructions
Russell from Hardinsburg, KY
Freezer is cold, Refridgerator is not as cold as it should be
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat (located just above the evaporator) and a relay on the control board (located in the fridge control panel). Checked the heater with an ohm meter -- OK. The thermostat closes the circuit at around 20 degrees and opens at around 32 degrees. Pulled out the thermostat, wiring, fan unit. Everything unplugs, unscrews, and unclips, don't cut wires. Put the whole assembly in a friends freezer for an hour or so to see if the thermostat closes -- OK. Problem had to be with the control board. Replaced control board, reprogrammed it per included instruction. Everything is working again.
Read more...
Your Price
$40.02
In Stock
Refrigerator Defrost Timer - 60hz 120v
Pulled plug.
Had to remove bottom drawers then used nut driver to remove screws closest to back wall in drawer runners. Once the back screws were removed the runners could be swung up or down out of way so back cover could be removed.
Once back cover was removed thermostat was located attached to top pipe going into coil using a spring clamp.
Cut the wires just outside the crimp connectors going into thermostat. Released the spring clamp buy squeezing botton together.
Removed old badly corroded thermostat.
I wish I had attached the crimp connectors to the new thermostat wires before mounting it. Reaching way in the back, while turning shoulders verticly and trying to get the wire connectors set from both sides was awkward and uncomfortable...The biggest PIA of the whole task.
Once connected I let the fridge (thermostat) cool for 10 min. Turned the dial defrost timer to get it into defrost mode. Stupidly touched the heating element to see if it was getting warm...it was very hot.
Coils steamed...every looked like it was working. Unplugged, put back cover back on and retattached drawer mounts.
Plugged back in and everying is working great! Read more...
PartSelect Number PS423801
Manufacturer Part Number 215846602
This Defrost Timer works like a clock by switching on the defrost heater circuit after a predetermined amount of compressor run time. This allows the defrost circuit to clear the evaporator of ice or frost to maintain proper airflow. The defrost timer is located in the control housing which is in the refrigerator section of your appliance. If this part is not working, it can lead to temperature increases in your refrigerator. If the compressor circuit fails, no cooling will take place; if the defrost circuit isn't activated, ice will quickly build up on the evaporator coils and reduce airflow and efficiency. If the timer doesn't advance or if the contacts have no continuity, the timer will need to be replaced. This timer measures approximately 3 inches long and 2.5 inches wide, and is constructed of plastic and metal. It comes in black/white/silver and is sold individually. This replacement part features 1 defrost timer.
Fixes these symptoms
- Freezer not defrosting
- Freezer section too warm
- Freezer too cold
- See more...
Installation Instructions
Stephen from Warrington, PA
Fridge got warm and freezer coils were frosted
Fridge is a side by side. The freezer is pretty narrow for a guy with wide shoulders. Pulled plug.
Had to remove bottom drawers then used nut driver to remove screws closest to back wall in drawer runners. Once the back screws were removed the runners could be swung up or down out of way so back cover could be removed.
Once back cover was removed thermostat was located attached to top pipe going into coil using a spring clamp.
Cut the wires just outside the crimp connectors going into thermostat. Released the spring clamp buy squeezing botton together.
Removed old badly corroded thermostat.
I wish I had attached the crimp connectors to the new thermostat wires before mounting it. Reaching way in the back, while turning shoulders verticly and trying to get the wire connectors set from both sides was awkward and uncomfortable...The biggest PIA of the whole task.
Once connected I let the fridge (thermostat) cool for 10 min. Turned the dial defrost timer to get it into defrost mode. Stupidly touched the heating element to see if it was getting warm...it was very hot.
Coils steamed...every looked like it was working. Unplugged, put back cover back on and retattached drawer mounts.
Plugged back in and everying is working great! Read more...
Your Price
$34.74
In Stock
Refrigerator Defrost Timer
PartSelect Number PS11723171
Manufacturer Part Number W10822278
The Defrost Timer (Defrost control) acts like a clock by switching on the defrost heater circuit after a predetermined amount of compressor run time. This allows the defrost circuit to clear the evaporator of ice or frost to maintain proper airflow. If this part is not working, it can lead to temperature increases in your refrigerator. If the compressor circuit fails, no cooling will take place; if the defrost circuit isn't activated, ice will quickly build up on the evaporator coils and reduce airflow and efficiency. If the timer doesn't advance or if the contacts have no continuity, the timer will need to be replaced. This part is located inside of the control housing on most models, and is approximately 3 inches long and 2.5 inches wide. This part is constructed of plastic and metal, and comes in white. It features 1 defrost timer, along with all necessary mounting hardware and installation instructions
Fixes these symptoms
- Freezer not defrosting
- Freezer section too warm
- Freezer too cold
- See more...
Installation Instructions
Lawrence from Grahamsville, NY
The frost free feature of the freezer was freezing over with ice and cooling coils were being insulated with thickening frost which caused the cooling air to rise in temperature from -5 degrees to 20 degrees.
I troubleshot the problem by reading the electrical schematic and concluding the heating elements (defrost cables) were either defective or the bi-metal temp sensor was open. When closed the temp sensor completes the circuit for the current to flow through the heaters to defrost the cooling coils every 8 hours and then when the bimetal opens at 55 degrees the circuit is open and the coils are cooled because the refridgeration motor is in run mode. A timer between the motor and heater elements also was defective. The timer controls the cooling period and the defrost period. I ohmed out each part according to the spec sheet of normal resistance of parts and thus the bimetal and timer were defective. I gather a surge of some duration and amplitude affected these parts because a storm 24 hours prior to refridgerator problem had passsed through the area and the AC electrical power had oscillated several times during that event. I used hand tools to do the repair. If you are not mechanically inclined a step by step proceedure would be moot. It is a matter of disassembly and assembly paying close attention to fragile parts.
Read more...
Your Price
$240.62
In Stock
Refrigerator Main Control Board
Tried ordering that part from Part Select since they have been great, but GE discontinued the part and their was not a replacement available. After much research, found the new replacement part number and ordered that, it went in quickly and for now seems to have solved the problem. Read more...
PartSelect Number PS17875680
Manufacturer Part Number WR55X46805
The main board assembly, also known as an electronic control board, is an authentic OEM replacement part used in refrigerators. It has dimensions of approximately 10 inches in by 6 inches. It controls the various features and function of the refrigerator such as temperature regulation, ice production, defrost control, and energy usage. If the control board is malfunctioning, you may notice temperature fluctuations, difficulties dispensing ice, a blank or unresponsive display panel and unusual noises such as clicking or humming. You can visually inspect the board for signs of damage or use a multimeter to test for continuity.
Fixes these symptoms
- Freezer section too warm
- Fridge and Freezer are too warm
- Fridge too warm
- See more...
Installation Instructions
Richard from CHEBOYGAN, MI
Refrigerator would warm up while freezer got colder
Repair man thought it was the control board and an issue with a relay on the board. Purchased the new board but found out the board was fine, and it was the recirculating fan that would go out intermediately.Tried ordering that part from Part Select since they have been great, but GE discontinued the part and their was not a replacement available. After much research, found the new replacement part number and ordered that, it went in quickly and for now seems to have solved the problem. Read more...
Your Price
$35.80
In Stock
Refrigerator Defrost Timer - 120v 60hz
PartSelect Number PS423802
Manufacturer Part Number 215846604
This defrost timer is designed for use in your refrigerator. The defrost timer acts as a clock, that switches the refrigerator from the freezing cycle to the defrost cycle and back. If your refrigerator is running non-stop, or is not running at all, you may need to check and replace the defrost timer. This is a 6 hour and 21 minute defrost timer. This part is made of white plastic, with 4 metal prongs protruding from one end. To complete this repair, you will need to access the old defrost timer which is located inside the console on the roof of your refrigerator. To complete this repair, you will need a 1/4-inch nut driver, a flat blade screwdriver, and a Phillips screwdriver. Be sure to disconnect power from your refrigerator before you begin this repair.
Fixes these symptoms
- Freezer not defrosting
- Freezer section too warm
- Fridge and Freezer are too warm
- See more...
Installation Instructions
Dennis from BEAUMONT, TX
Freezer Freezing up and blocking the vent for refrigerator, not cooling the fridge.
Went pretty straight forward, except the heat shrink tubing was about 2 sizes too big. Would not shrink small enough to seal the connections. Even with a heat gun it would not shrink small enough. OH, another think is when I plugged the fridge back in the defrost timer was in defrost mode. Took me a few minutes to figure that out and use a screwdriver to turn the timer back to the on position. Other than that, install was pretty simple.
Read more...
Your Price
$149.36
In Stock
Refrigerator Main Control Boar
2. Unplug appliance or turn off appropriate circuit breaker.
3. Remove all items on top shelf of refrigerator to allow yourself working room.
4. Remove one phillips head screw, at front of control panel bezel.
5. Allow bezel to hang down a little so you can disconnect multi-pin connector, by squeezing the tabs on opposite sides and pulling down. Note black dot on tab for easier orientation of replacement connector.
6. Gently pull the entire assembly forward to remove. It has two pins that align and hold the back of the assembly to the deck.
7. Place assembly on a table with the control board facing up.
8. Remove plastic push pin that holds protective cover over the control circuit board.
9. Remove temperature control knob by pulling straight out.
10. Push back 2 locking tabs at the front of the control circuit board so it will become loose.
11. Pry up cable tie mount that holds wire bundle to the assembly.
12. Free thermistor wire from it guides and flip over the assembly that is holding the sensor.
13. Peel up the tape holding the wire in the molded groove so wire/sensor can be removed. It is not necessary to remove the tape since you will use it again.
14. Remove the two wires that connect to the door switch at the front left of the assembly. It's a tight fit, but you can remove the spade connectors.
15. Now the circuit board assembly can be removed and set aside.
16. Optional - at this time you can use the continuity tester to verify the door switch is working properly.
17. Now install the new control board by reversing the removal steps. Read more...
PartSelect Number PS17139830
Manufacturer Part Number WR55X43825
This main control board is a vital electronic component that governs the essential operations of compatible refrigerators. Acting as the central processor, it regulates temperature settings, manages fan speeds, controls the defrost cycle, and coordinates other key functions to ensure consistent cooling and food preservation. Integrated LED lighting enhances visibility within the refrigerator, while sensor inputs allow the board to dynamically adjust performance for optimal energy efficiency. A malfunctioning control board may result in erratic temperatures, non-functional lighting, or unresponsive controls. Replacing a faulty unit with this genuine OEM component restores reliable operation and supports long-term appliance performance.
Fixes these symptoms
- Light not working
- See more...
Installation Instructions
Christopher from Sparta, NJ
Refrigerator light not working
1. Order replacement board so it's on hand.2. Unplug appliance or turn off appropriate circuit breaker.
3. Remove all items on top shelf of refrigerator to allow yourself working room.
4. Remove one phillips head screw, at front of control panel bezel.
5. Allow bezel to hang down a little so you can disconnect multi-pin connector, by squeezing the tabs on opposite sides and pulling down. Note black dot on tab for easier orientation of replacement connector.
6. Gently pull the entire assembly forward to remove. It has two pins that align and hold the back of the assembly to the deck.
7. Place assembly on a table with the control board facing up.
8. Remove plastic push pin that holds protective cover over the control circuit board.
9. Remove temperature control knob by pulling straight out.
10. Push back 2 locking tabs at the front of the control circuit board so it will become loose.
11. Pry up cable tie mount that holds wire bundle to the assembly.
12. Free thermistor wire from it guides and flip over the assembly that is holding the sensor.
13. Peel up the tape holding the wire in the molded groove so wire/sensor can be removed. It is not necessary to remove the tape since you will use it again.
14. Remove the two wires that connect to the door switch at the front left of the assembly. It's a tight fit, but you can remove the spade connectors.
15. Now the circuit board assembly can be removed and set aside.
16. Optional - at this time you can use the continuity tester to verify the door switch is working properly.
17. Now install the new control board by reversing the removal steps. Read more...
Your Price
$122.20
In Stock
Refrigerator Main Control Board
PartSelect Number PS17645341
Manufacturer Part Number WR55X45225
This dispenser control board is a vital electronic component responsible for managing water and ice dispensing functions in compatible refrigerators. As the interface between user commands and mechanical operations, it controls dispensing mechanisms and display settings, ensuring accurate and efficient performance. Engineered as a genuine OEM replacement, it offers reliable compatibility and long-term durability. A malfunctioning board may result in issues such as non-responsive buttons, failure to dispense water or ice, or display errors. Replacing a faulty control board with this high-quality component restores full functionality, improves user interaction, and supports consistent appliance performance.
Fixes these symptoms
- Ice maker won’t dispense ice
- Not dispensing water
- See more...
Installation Instructions
Martin from PORTSMOUTH, NH
Temperature setting was changing all by itself
I found out that the wires behind the display were touching the back of the circuit board which was causing the control board to change temperatures throughout the day. There was actually nothing wrong display board but I swapped out with a new one just to be safe. Easy install.
Read more...
Your Price
$132.49
In Stock
Refrigerator Electronic Control Board
PartSelect Number PS10060580
Manufacturer Part Number A01078804
This electronic control board is for refrigerators.
The electronic control board manages the functions of the refrigerator such as cooling and defrost times.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
- Fridge too warm
- See more...
Installation Instructions
Clifford from VIRGINIA BCH, VA
Evaporator coil and fan frozen; fault code HI
The fault code HI or H1 would periodically appear. Evap coil and fan would freeze over. I replaced evap fan motor, run capacitor, defrost thermostat, and temp sensor with no luck. I know Evap heater worked because I burnt my fingers on it. I noticed when I tapped on the front of the control panel to reset the fault, the evap fan would turn on. I assume the relay in the control board was intermittently faulty. I replaced the board and my fridge is good to go, finally.
Read more...
Refrigerator Circuit Board or Touch Pad Brands
- Admiral Refrigerator Circuit Boards and Touch Pads
- Amana Refrigerator Circuit Boards and Touch Pads
- Crosley Refrigerator Circuit Boards and Touch Pads
- Dacor Refrigerator Circuit Boards and Touch Pads
- Electrolux Refrigerator Circuit Boards and Touch Pads
- Estate Refrigerator Circuit Boards and Touch Pads
- Frigidaire Refrigerator Circuit Boards and Touch Pads
- General Electric Refrigerator Circuit Boards and Touch Pads
- Gibson Refrigerator Circuit Boards and Touch Pads
- Hotpoint Refrigerator Circuit Boards and Touch Pads
- Inglis Refrigerator Circuit Boards and Touch Pads
- Jenn-Air Refrigerator Circuit Boards and Touch Pads
- Kenmore Refrigerator Circuit Boards and Touch Pads
- KitchenAid Refrigerator Circuit Boards and Touch Pads
- LG Refrigerator Circuit Boards and Touch Pads
- Magic Chef Refrigerator Circuit Boards and Touch Pads
- Maytag Refrigerator Circuit Boards and Touch Pads
- Samsung Refrigerator Circuit Boards and Touch Pads
- Thermador Refrigerator Circuit Boards and Touch Pads
- Uni Refrigerator Circuit Boards and Touch Pads
- Westinghouse Refrigerator Circuit Boards and Touch Pads
- Whirlpool Refrigerator Circuit Boards and Touch Pads