Cooktop Control Transformer WB27X21609

Hello Jim, Thank you for the great question! Most ignition-related issues are because the burner head gets clogged after cleaning or after spillovers. If the cooktop or burners were recently cleaned, there could be moisture in the burner head ignition port (hole) and flame ports. The burner will continuously click and will not ignite until the ports are clear and the burner dries out. Before cleaning, disconnect power to the range or cooktop. After cleaning the burner heads and caps, shake out excess water and let them dry out thoroughly by air drying or by setting in a warm oven for 30 minutes. Once dry, replace the burners to their correct position, plug in the unit and try lighting the burners again. It can take up to 10-12 clicks to ignite a burner. I hope this helps! Good luck with your repair.