Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Philip
January 10, 2018
The control panel buttons are inoperative when the door is open, & displays 100 in the display. The control panel buttons only work when the door is closed.
For model number PDWT480V00SS
Hi Philip,
Thank you for your question. It may be your button assembly that is the problem, but it also might be your control module that is the problem. Unfortunately only a certified repair technician will be able to test for that. Good luck with your repair.
Dishwasher fills, wash cycle and stops with water in the tub. Restart, water exits tub, fills, and begins wash cycle and stop with water in tub. Already replaced water inlet valve and flood valve.
For model number Cdwt280v05ss
Hi Stephen, there are a lot of different possible causes for this, the control board could be faulty, maybe faulty pump ect;. I would get a technician to take a look. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
