Frigidaire/Frigidaire_Thumb/FR1LXKHX.gif
See part F3 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Dishwasher Tub Gasket - Gray

★★★★★
★★★★★
27 Reviews
$ 20.37   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS8260227
Manufacturer Part Number 154827601
Manufactured by Frigidaire
Product Description

Dishwasher Tub Gasket - Gray Specifications

This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing water leaking out. If broken, it should be replaced. Refer to your model number and user manual to ensure this part is right for you. When making this repair, open the dishwasher door and take out the lower dish tray for better access. Pull out the old gasket, and clean the channel with a rag. Push the new gasket into place into the notch on the door, which you should see upon close inspection, using a flat-head screwdriver for assistance if necessary. We do not recommend cutting any additional length off on the tub gasket if any is present during your repair.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Not cleaning dishes properly | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Gibson.
Part# 154827601 replaces these:
AP5690109, 2705419, 154827601, 154211801, 154219501, 154561001, 154561002, 154782401, 154845301
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

17 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tina
July 20, 2017
My dishwasher door is occasionally leaking on the left side. Which seal/gasket would fix this or should I replace something else?
Hello Tina, this sounds like you have a faulty lower door gasket that needs replacing. Please let us know if you have any further questions.

18 people found this helpful.

Was this helpful?
Thank you for voting!
Kiersty
July 20, 2017
I had a leak so im installing the Door Gasket just wanted to know if it was the one that runs vertically or horizontally?
Hi Kiersty, the door gasket runs down and bends horizontally at the bottom, about 0.5 inches. I hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Thomas
January 11, 2019
Extra length on the tub gasket, leave it? Or cut the extra off?
Hello Thomas, Thank you for the question. It should be left. After the repair is complete, shut the dishwasher door and leave closed for a few hours to ensure it properly seals into place. Hope this helps, good luck with this repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Linda
July 20, 2017
Dishwasher is leaking from the left side of the door during rinse and that is it… do I need a tub gasket?
Hi Linda, we recommend first checking the spray arms, you are looking for visible damage such as cracking or clogging. From there you can take the inner panel from the door and check for leaking inside of the door. If we are right, you need to replace the vent assembly 154423601. Best of luck with this repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Michele
April 28, 2018
Our dishwasher is leaking underneath near pump on left side of pump. Hard to tell were leak is coming from. Leaks when the dishwasher is running.
For model number fgbd2438pb4a
Hi Michele, Thank you for your question. If the dishwasher is leaking, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the bottom door gasket, the tub gasket, the splash shield, the drain hose and the front and rear o-rings. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Denise
November 7, 2019
Dishwasher started smelling like burning rubber. Does this dishwasher have a belt, if yes where would it be in the dishwasher
For model number FGCD2444SB1A
Good Day Denise. Thank you for your question in regards to your unit (Model Number FGCD2444SB1A). Based on our research this unit has a Sump Gasket (PartSelect Number PS420465). This part is attached to the Sump Assembly which connects to the Feed Tube. There are also two O-Rings which connect to the Motor which may be causing the smell as well. Hope this helps. Best Regards.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Tony
December 22, 2019
Which gaskets do I need for replacement of the 2 door gaskets?
For model number FGHD2465NF1A
Hello Tony, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8260227 for the Tub Gasket and PartSelect Number PS9495545 for the Bottom Door gasket. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Garry
January 5, 2018
Ordered the door gasket from parts select the gasket i got will not fit under the gasket retainer looked it up and it says it is the right one. Part # wp3368007. What is up how do i get the right gasket or how do i get this one to work under the retainer. Order # 10668761 help is needed
For model number DU9000XR2 whirlpool
Hello Garry, Thank you for your inquiry. We also show that that part# WP3368007 is the correct door gasket for this model. Although we do not have a repair video for this exact part, I have included a link for a similar video to assist you. Hope this helps! https://www.youtube.com/watch?v=_w9wtI_7-m8

2 people found this helpful.

Was this helpful?
Thank you for voting!
Bob
February 6, 2018
There is a gasket around the strainer inside the drum, it is visible but dose not show on parts list. Right under the cover with the 9 screws i could send you a picture if it would help
For model number dwu9202aae
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS11746851. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Frank
October 23, 2017
I recently replaced the door latch but lately I am getting water dripping onto the floor in front of the unit from the top of the door from a lot of condensation along the entire top of the door during the final drying mode. When I push the top of the door in the heat that escapes is reduced and just comes out of the vent on the left top of the door which is what it is supposed to do. Since there is no actual water escaping from the door seal would replacing the door seal solve this problem?
For model number GLDB957AQ2
Hi Frank, Thank you for the question, I suggest checking the gasket to make sure it has no defects or damage keeping the door from sealing all the way unless pressure is applied. You can also check the door strike, the part the latch would connect with. Make sure it isn't lose or is damaged and preventing the latch from fully keeping the door closed.You can also check to make sure the hinges are not warped or bent. The door should be sitting level when it is closed. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Frigidaire Dishwasher Dishwasher Tub Gasket - Gray

Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 36 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
dishwasher was leaking water
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
  • Charles from Milton, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    154827601
159 of 179 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking from the bottom of the door
With the door wide open and lower dishtray out, I pulled the old gasket out of its channel. I cleaned the channel with a rag and replaced it with the new gasket. It needed to be trimmed about an inch in order to get the door to close properly. Took me about 5 minutes. Then I removed the old bottom door gasket. Just grasped the plastic edge showing while the door is completely open. Pull outward with fingers moving toward the heating element. Cleaned this area also. Took the new gasket with notch on the right hand side of the dishwasher and pushed it into place. If you get down and look closely, you can see where the notch hooks up. The rest of the piece just slides in after that. Hasn't leaked since! No leaks AND no service call fee. Parts came super fast! So glad I found this website. I'm a housewife, you can do this!
  • beth from green bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    154827601, 809006501
86 of 94 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack was dropping out of rollers/Slides
This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in.
1. Removed stops on front end of Upper Dishrack Slide on both sides.
2. Removed Upper Dishrack
3. Remove Roller and Axle/clip (4 each)
4. Push Roller onto Axle on all 4 kits
5. Install all 4 roller kits on Upper Dishrack
6. Remove stops from back end of Upper Dishrack Slides.
7. Remove both Slides
8. Remove 8 each Tub Wheels.
9. Using old or new Screws and Washers, install new Tub Wheels.
10. Install both Upper Dishrack Slides ensuring that small holes are toward the back.
11. Install stops on the back end of Slides.
12 Install Upper Dishrackinto slides
13. Install front stops on slide
14. Pulled out Gasket
15. Install replaced Gasket
43 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Found water leaking at bottom of door
1. Bottom door gasket removed very easy by grabbing left corning and pulling out. Starting with notch on right side, slide the hard plastic side up at a slight angle to catch the slot the gasket will seat in. Slowly moving toward the left, push gasket into seated position. Notch in gasket will make sure it is in correct position. Push gasket all the way in so that it is flush with bottom edge of door. Watch when first sliding gasket in, it has to g at a slight up angle or it will fall into an empty space.
2. Remove Tub gasket by gripping one side and pulling out. Replace in same fashion making sure the angled wedge of gasket is first part that lays flat in slot. Working from one side to the other, make sure the gasket seats completely. Trim excess if necessary.
  • Richard from Spring Hill, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    154827601, 809006501
33 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking at the lower left side of the door.
Probably the easiest repair job that you could encounter. I removed the old gasket from the door frame. Cut the new gasket to length and pushed it into the door frame.

Water leak solved...
  • John from Hummelstown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    154827601
20 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak around the door
Much easier than I expected. The bottom of the door gasket simply pulled out and the new one slid back into the same spot without any issues. That gasket did not solve the problem. The unit continued to leak. We waited for the back ordered door gasket approximately 2 week to come in. Once it came in the process took about 10 minutes. The old gasket easily pulled out of it's groove around the door. That gasket was dried out and worn in several places. We fitted the new gasket in the groove, trimmed off the excess, closed the door and ran the dishwasher and had no leaks. The two gaskets definitely did the trick. This is an easy DIY for anyone and the parts were priced right!!
  • Gregory from Taunton, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
  • Parts Used:
    154827601, 809006501
13 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace sump gasket
#1 rule, make sure you valve off the water before removing any hoses. Remove wire trays inside dishwasher and then pull out dishwasher far enough to disconnect water line and power cord. Remove center piece and screen covering sump inside the dishwasher. Turn dishwasher on its side and remove hoses to sump and pump. Disconnect power to sump pump. Loosen retaining nuts that secure the sump and remove. Replace old gasket on sump with new. Turn dishwasher upright. Be careful with placement of new gasket when reinserting sump so that the gasket doesn't come out of position and the sump is centered properly. Secure with retaining nuts from bottom. Reconnect power connector and hoses to sump. Pour enough water into the dishwasher to verify gasket doesn't leak... look with flashlight under dishwasher for signs of water dripping from sump. Reinstall screen and centerpiece in sump inside the dishwasher. Reconnect water line and power cord. Run through wash cycle while monitoring for leaks under dishwasher. Reinstall wire trays.

Piece of cake as long as you get the gasket installed properly and the sump centered correctly... do not overtighten the retaining nuts or it may force the gasket out of position when the screen is secure with the center locking piece over the sump.
  • Greg from Rockwall, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
  • Parts Used:
    154827601, 154246801
13 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaky on bottom right
Pulled out old gasket and shield guards and put in new ones. No tools needed. Piece of cake??
  • Sandra from DAYVILLE, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    154827601, 154701001
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leak in hose, door leakage, weak door springs.
I received the parts 3 working days from order. They were in perfect condition and exactly like the originals.
Pulled dishwasher out from under counter. Removed door. Replaced drain hose. Replaced gasket. Replaced springs. Put door back on. Tried rinse cycle. Placed dishwasher back under counter. Works like new.
9 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installed springs, linkage, gasket, and bracket
Repair was easy. Unfortunately I really didn't need the springs or linkage, but I couldn't see that until I took the dishwasher out from the counter. The springs were not stiff enough to keep the door from just falling open. So I cut about an inch off the long end and bent it into a hook. I didn't need new linkages the old ones were fine. The gasket made the biggest difference and went in very easy. The door will be difficult to close for a few times then everything works great.
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
27 Reviews
4.7
Filter By Rating:
  • 5 Stars
    21
  • 4 Stars
    5
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8260227
Manufacturer Part Number: 154827601
Brand
Model Number
Description
Kenmore
58714000100
Dishwasher
Kenmore
58714000101
Dishwasher
Kenmore
58714000102
Dishwasher
Kenmore
58714001991
Dishwasher
Kenmore
58714001992
Dishwasher
Kenmore
58714001993
Dishwasher
Kenmore
58714002990
Dishwasher
Kenmore
58714002991
Dishwasher
Kenmore
58714002992
Dishwasher
Kenmore
58714002993
Dishwasher
Kenmore
58714003100
Dishwasher
Kenmore
58714008001
Dishwasher
Kenmore
58714008002
Dishwasher
Kenmore
58714008003
Dishwasher
Kenmore
58714009100
Dishwasher
Kenmore
58714009101
Dishwasher
Kenmore
58714009102
Dishwasher
Kenmore
58714012400
Dishwasher
Kenmore
58714012401
Dishwasher
Kenmore
58714012402
Dishwasher
Kenmore
58714012403
Dishwasher
Kenmore
58714012404
Dishwasher
Kenmore
58714012405
Dishwasher
Kenmore
58714012406A
Dishwasher
Kenmore
58714012407A
Dishwasher - DISHWASHER
Kenmore
58714012408A
Dishwasher - DISHWASHER
Kenmore
58714012409B
Dishwasher - DISHWASHER
Kenmore
58714012410B
Dishwasher - DISHWASHER
Kenmore
58714012411B
Dishwasher - DISHWASHER
Kenmore
58714012412B
Dishwasher - DISHWASHER

Get in touch, we're here to help!

Open until 10PM EST

Contact Customer Service