Dishwasher Door Bottom Seal 5304500204

Hi Gary, Thank you for your question. There is a video on our website that you can reference on how to install the bottom door gasket . The dishwasher in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS9495545. I hope this helps. Thank you and have a great day!

Hello Tim, Thanks for your question. This issue is likely to arise from the door seal being damaged. We would advise checking it for signs of wear and tear. It may also be worth testing the water valve with a multimeter to ensure it has continuity, as that could be causing the leaking. I hope this helps.

Hello Jim, thank you for your question. We have an installation video on this part that you can find at this link. https://www.partselect.com/PS9495545-Frigidaire-809006501-Bottom-Door-Gasket.htm?SourceCode=4&SearchTerm=FGBD2434PF0A&ModelNum=FGBD2434PF0A. Or you can search part number PS9495545. I hope this helps!

Hi Nathalie, Thank you for your question. Here are some installation instructions from our website that you may reference for more information, "Remove the lower dish tray and set it aside. Remove the two Phillips screws on each side of inner liner, and then close door. You should then be able to slip off the external facing and set it aside. Pull the lower gasket toward the tub until it is fully removed. Reinsert the new gasket into the same tight slot, making sure that the notch inserts into the slot and that the flexible gasket runs the full length of the tub. The gasket should bow out slightly toward the tub. Also, make sure that the side seals do not interfere with the bottom seal fully mating with the floor of the tub. Close the door and check to make sure the lower gasket reveal is the same across the length of the inner liner. Reinstall the dish tray, then reinstall the external facing, using the same four Phillips screws to secure it. Test the sealing by running a short cycle on the dishwasher." We hope this helps! If you have any questions, please let us know.

Hello Marie, thank you for asking. According to our research, the leaking during the wash cycle is probably due to one of the following gaskets: door bottom seal, part number PS11703834, tub gasket, part number PS8260227, and sump gasket, part number PS420465. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Hello Michael, thank you for your question. The model FGIP2468UF2A has the Dishwasher Door Bottom Seal PS11703834 as you have mentioned. It also have the Tub Gasket PS8260227 that is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. We have a video of how to replace it on our site. We look forward to hearing from you.

Hello Saunders, thank you for your question. Unfortunately, that will not work. The lower door gasket for your unit is only available by purchasing the whole inner door liner Part Number: PS2379424. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hello Brian, Thank you for the question. The holes are to release air. If it is leaking it might be a build up of condensation.I suggest checking to make sure the gasket is still sealing properly with no gaps. Hope this helps!

Hello Daniel, thank you for contacting us. For us to locate the correct parts and repair information we will require the complete model number of the unit. Once you have located the model number, please feel free to resubmit the question and we will be happy to help you. We look forward to hearing from you!

Hello Luke, thank you for your inquiry. First, check for obstructions inside the spray arm. There are small holes that the water pushes out of. Check there is not debris blocking the flow of water. If possible, visually inspect the washer arm while the dishwasher is running to see if it is spraying water evenly or if it is aimed at the door. Also check the water pressure, if water pressure is high it can also cause this issue. If all checks are fine, we would recommend replacing the pump and motor assembly, part number PS3497737. We hope this sorts out your problem!