EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

804621672A Frigidaire Dishwasher - Overview

Diagrams for 804621672A

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Spray Arm – Part Number: 5304517203
$44.14
In Stock
Lower Spray Arm
★★★★★
★★★★★
(153)
Part #5304517203
The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.
Wheel & Bushing Assembly – Part Number: 5304532229
$11.99
In Stock
Wheel & Bushing Assembly
★★★★★
★★★★★
(25)
Part #5304532229
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.
Dishwasher Tub Gasket - Gray – Part Number: 154827601
No Longer Available
Dishwasher Tub Gasket - Gray
★★★★★
★★★★★
(52)
Part #154827601
This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing water leaking out. If broken, it should be replaced. Refer to your model number and user manual to ensure this part is right for you. When making this repair, open the dishwasher door and take out the lower dish tray for better access. Pull out the old gasket, and clean the channel with a rag. Push the new gasket into place into the notch on the door, which you should see upon close inspection, using a flat-head screwdriver for assistance if necessary. We do not recommend cutting any additional length off on the tub gasket if any is present during your repair.
Heating Element Brass Nut – Part Number: 154106202
$16.03
In Stock
Heating Element Brass Nut
★★★★★
★★★★★
(9)
Part #154106202
The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step guide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.
SUPPORT – Part Number: 5304532235
$13.10
In Stock
SUPPORT
★★★★★
★★★★★
(20)
Part #5304532235
This part is a replacement spray arm support for your dishwasher. It is made of white plastic and is approximately 3 inches long, 1 inch wide, and 3 inches tall. This is the support for the lower spray arm and is found at the bottom of the dishwasher. The lower spray arm spins on the support when the dishwasher is running. If the support is cracked or broken, the spray arm may not spin, and your dishes will not be cleaned properly. You may also notice that your dishwasher is noisy when it runs; this can mean the arm support is damaged as well.
Dishwasher Door Bottom Seal – Part Number: 5304500204
$36.51
In Stock
Dishwasher Door Bottom Seal
★★★★★
★★★★★
(22)
Part #5304500204
This door seal is for dishwashers. Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door. After installing the door seal, shut the dishwasher door and leave the door closed for several hours to properly seat the new door seal.
Dishwasher Drain Hose – Part Number: 807117001
$41.86
In Stock
Dishwasher Drain Hose
★★★★★
★★★★★
(25)
Part #807117001
If your dishwasher is leaking or not draining properly, you may need to replace the drain hose. The drain hose connects to the pump located below the lower spray arm and aids in proper dishwasher drainage. This white and black plastic hose is 7.5 feet long. For this repair, you will need either a 1/4-inch or 5/16-inch nut driver, depending on your model. You will need to remove the lower access panel on your dishwasher to complete this repair; it is often easier to remove the dishwasher from the cabinet to do so. Be sure to disconnect the dishwasher from both the power and water supply before completing this repair.
Latch – Part Number: 5304525218
$52.84
In Stock
Latch
★★★★★
★★★★★
(25)
Part #5304525218
This dishwasher door latch assembly is a critical component designed to ensure safe and efficient operation. It features an integrated switch that functions as an on-off mechanism, preventing the appliance from running when the door is open. If your dishwasher fails to start or the door does not close or latch securely, replacing the latch assembly may resolve the issue. Installation requires disconnecting the power supply to avoid electrical hazards. This part is compatible with standard dishwasher models and is engineered for a secure fit and reliable performance.
Door Spring – Part Number: 154430501
$31.85
In Stock
Door Spring
★★★★★
★★★★★
(12)
Part #154430501
This door spring is manufactured for a dishwasher door. The door spring applies tension to the dishwasher door so that the door does not drop too quickly when it is opening. If the door drops too quickly, it could cause damage to the dishwasher door or dishwasher door hinges. This spring is sold individually. Check the spring on the opposite side of the dishwasher door, they often wear at the same rate so you may want to replace both springs for exact tension on either side. No tools are required for this repair. This is an OEM replacement part.
Lower Rack Assembly (Grey) – Part Number: 5304535379
$89.01
In Stock
Lower Rack Assembly (Grey)
★★★★★
★★★★★
(21)
Part #5304535379
This lower dishrack assembly is a genuine replacement component designed to restore full functionality to your dishwasher. Made from durable, rust-resistant materials, it securely holds dishes, cookware, and utensils in place during the wash cycle, ensuring optimal cleaning and preventing damage to both the items and the appliance interior. The rack’s design promotes proper spacing and water flow, contributing to improved performance and efficiency. Compatible with select Frigidaire dishwasher models, this OEM part is easy to install and sold as a complete assembly. For best results, unplug the appliance before installation and consult your user manual for guidance.
Lower Spray Arm Support – Part Number: 807145201
$30.84
In Stock
Lower Spray Arm Support
★★★★★
★★★★★
(12)
Part #807145201
This plastic cover and stem assembly helps hold the lower spray arm in place.
Upper Rack Assembly (Grey) – Part Number: 5304535380
$100.76
In Stock
Upper Rack Assembly (Grey)
★★★★★
★★★★★
(14)
Part #5304535380
This upper dishrack assembly is a durable replacement component designed specifically for select Frigidaire dishwashers. Engineered for a precise fit and reliable performance, it restores full functionality to the upper rack area, allowing for secure dish placement and efficient cleaning. The grey finish complements most dishwasher interiors, while the robust construction ensures long-term use. Before purchasing, it is important to verify compatibility using your appliance’s model number to ensure proper installation and performance.

Common Symptoms of the 804621672A

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Rack Roller Missing
379 of 395 people found this instruction helpful.
  • Sandra from Mount Vernon, WA
  • Really Easy
  • Less than 15 mins
Took the roller out of the package, snapped it into place. Less than 15 seconds. Works good as new.
Was this helpful?
Thank you for voting!
spray arm keeps melting
283 of 300 people found this instruction helpful.
  • Donna from Madison, OH
  • Really Easy
  • Less than 15 mins
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the t hing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
Was this helpful?
Thank you for voting!
dishwasher was leaking water
177 of 213 people found this instruction helpful.
  • Charles from Milton, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
Was this helpful?
Thank you for voting!