Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
January 30, 2019
Hi there ay my dryer work i set the cycle over and over because it takes like 3 times to dryer i see the burner work but like very short time and goes off so it’s stay off more than on i already ck the duck ling is all fine i had replace sensor air thermostat and the i
For model number Dv45H7000GW
Hello Joe, Thank you for your inquiry. I suggest checking the following parts: PS4204984 Thermistor and PS4206812 Moisture Sensor. Good luck with your repair!
Was this helpful?
Thank you for voting!
Lloyd
May 7, 2019
I replaced the thermostat and the thermistor and cleaned the inside out real good. It worked once, then stopped. Any suggestions?
For model number DV50F9A6GVW1
Hi Lloyd, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
John
November 20, 2023
Dryer stopped in mid cycle and will not restart. Cycle indicator light and one symble on control panel blink a few times and stop
For model number Dv456gwhdwr /aa
Hi John, thank you for the question. Based on the description that you have provided, we would recommend checking the door latch to fix the issue. If your door latch is worn out, the door can open when the dryer is turned on, causing it to stop mid cycle. If this is not the issue, we would recommend replacing the moisture sensor, part number PS4206812, to solve the problem. Glad to be of help!
