Models > 40299032010

40299032010 Kenmore Dryer - Overview

Sections of the 40299032010

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Drive Belt – Part Number: 6602-001655
Drive Belt
★★★★★
★★★★★
(17)
PartSelect #: PS4133825
Manufacturer #: 6602-001655
The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take a few minutes. This ...
$43.33
  In Stock
Thermistor – Part Number: DC32-00007A
Thermistor
★★★★★
★★★★★
(16)
PartSelect #: PS4204984
Manufacturer #: DC32-00007A
This is a thermistor, also known as a dryer thermistor. The thermistor is attached to the blower housing, it will help regulate and oversee the temperature within the dryer. The most common symptom of...
$27.18
  In Stock
Idler Pulley Assembly – Part Number: DC93-00634A
Idler Pulley Assembly
★★★★★
★★★★★
(22)
PartSelect #: PS11771601
Manufacturer #: DC93-00634A
$59.11
  In Stock
Thermal Fuse – Part Number: DC47-00016A
Thermal Fuse
★★★★★
★★★★★
(5)
PartSelect #: PS4205213
Manufacturer #: DC47-00016A
This thermostat is a genuine OEM part and is manufacturer-approved for electric dryers. The thermostat is responsible for monitoring and maintaining the temperature inside the dryer during the drying ...
$22.69
  In Stock
Drum Support Roller & Axle – Part Number: DC97-16782A
Drum Support Roller & Axle
★★★★★
★★★★★
(7)
PartSelect #: PS4221885
Manufacturer #: DC97-16782A
The drum support roller and axle, which includes the roller shaft and mounting clips, is used in dryers. This part holds the drum as it rotates on the support wheels. When the roller begins to wear ou...
$40.68
  In Stock
Moisture Sensor – Part Number: DC61-02627A
Moisture Sensor
★★★★★
★★★★★
(1)
PartSelect #: PS4206812
Manufacturer #: DC61-02627A
$12.02
  In Stock
Retainer Clip – Part Number: DC61-01228A
Retainer Clip
PartSelect #: PS4206169
Manufacturer #: DC61-01228A
$4.04
  In Stock
CASE-FILTER(U);BIG-BANG – Part Number: DC61-02610A
CASE-FILTER(U);BIG-BANG
★★★★★
★★★★★
(3)
PartSelect #: PS4206806
Manufacturer #: DC61-02610A
$17.81
  In Stock
Leveling Leg – Part Number: DC97-12150A
Leveling Leg
★★★★★
★★★★★
(1)
PartSelect #: PS4219720
Manufacturer #: DC97-12150A
The leveling leg on your dryer attaches to the bottom of the dryer base. The function of the leg is to keep your dryer level while it operates. This part is approximately 3 inches in length, 2 inches ...
$33.40
  In Stock
SCREW-TAPPING;TH,+,1,M4, – Part Number: 6002-000213
SCREW-TAPPING;TH,+,1,M4,
PartSelect #: PS4133148
Manufacturer #: 6002-000213
$4.04
  In Stock
ROLLER-IDLER;WINGS-DRYER – Part Number: DC66-00402A
ROLLER-IDLER;WINGS-DRYER
★★★★★
★★★★★
(1)
PartSelect #: PS4212184
Manufacturer #: DC66-00402A
$13.00
  In Stock
High Limit Thermostat - L230-50F – Part Number: DC47-00017A
High Limit Thermostat - L230-50F
PartSelect #: PS4205216
Manufacturer #: DC47-00017A
$71.70
  In Stock

Questions And Answers for 40299032010

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 40299032010

[Viewing 5 of 5]
No heat or not enough heat
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The dryer turned on but the drum did not move when you pressed start even though It started it cycles.
I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you
Parts Used:
Drive Belt
  • Christopher from SUGARLOAF, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
15 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tension/Dead Man Wheel Broke/Shattered
Dryer would not start but electronics were working.

Pulled top of dryer off; noticed the belt was loose but not broken.
Went in through the back (1 screw and removed the exhaust pipe/plate); noticed the wheel was broken and thus the belt had fallen off.

Ordered replacement wheel/arm.
One screw to remove old one, one screw to install new one...tentioned the belt. Dryer was good as new.
Parts Used:
Idler Pulley Assembly
  • Noah from OXFORD, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt fell off because of belt roller on the tensioner melted, ciezed and fell off
Watched a video on utube, how to repair my 16 month old steam dryer. The hardest part was laying on my belly holding the spring loaded tensioner and slipping the belt on around the blower housing. Only cost me $23. Winning!
Parts Used:
Idler Pulley Assembly Retainer Clip
  • Vicky from BLOOMSBURY, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!