Cycling Thermostat - 4 Terminal 131298300

This operating or cycling thermostat is used in dryers to monitor and direct the temperature inside the dryer. If your thermostat is shorted out and it will not allow the heat to come on, it is best to replace it. The tool needed for this repair is a 1/4 inch nut driver. The first step for this repair is to access the back panel and remove the screws. Next, remove wires connected to the thermostat and remove the screw to pull out the thermostat. Now you can install new thermostat. For further installation instructions, refer to the diagram provided by the manufacturer. As a safety precaution, remember to unplug your appliance from the power source before starting this repair.