Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
November 9, 2017
Rear drawer support. Part shown (292) does not match the one from my drawer. The numbers on my part show 229c4991 then below that is p001. Additional numbers are 7 and below that pa66 on the bottom arm of the part. Let me know if you need any additional information. Thank you.
For model number J2S968KH1CC
Hi John, Thank you for the question. There has been a factory design change and you must change both rear supports from side to rear.The parts may look different from the original but will function the same. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
December 3, 2017
GE oven warming drawer got stuck, when I pulled too hard both back support parts broke off. The part 292 in your diagrams doesn't look like my parts. How can I replace them?
For model number JBP84TH2WW
Hello Cindy, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS249598.There has been a factory design change and you must change both rear supports from side to rear, It is now held in by the provided screw. Good luck with the repair!