Control, Electric - White WPW10655840

Hello Mark, thank you for your question. We would recommend testing the oven sensor first, PartSelect Number: PS11749737. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor is tested and is not faulty the electronic board should be replaced. I hope this helps!

Hello Marquet, thank you for your question. The error F2 E0 is in reference to the key panel on the electronic control board. For your model the key pad is a part of the whole electronic control unit so you would want to order part number Control, Electric Part Number: PS11756982 for a white unit or Part Number: PS11756559 for black. Replacing this part will fix that error code. I hope this helps!

Hello Mark, thank you for your question. The control board in stainless is not available anymore. The manufacturer only provides this part in white and black. The black one is part number W10348719. I hope this helps!

Hi John, Thank you for the question. This sounds like an issue with the Oven Sensor, PartSelect Number: PS11749737.This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

Hi Ronnie, thank you for reaching out. Before replacing the control board, we would suggest checking the thermal fuse part number PS11740991. You may need to replace it to fix the issue. We hope this sorts out your problem!