11755402-1-M-Whirlpool-WPW10477552-Terminal Nut
Part Location Diagram of WPW10477552 Whirlpool Terminal Nut
See part 15 in the diagram
11755402-1-S-Whirlpool-WPW10477552-Terminal Nut 360 view
( Grid squares measure 1x1 inch )
11755402-1-S-Whirlpool-WPW10477552-Terminal Nut 11755402-2-S-Whirlpool-WPW10477552-Terminal Nut 11755402-1-S-Whirlpool-WPW10477552-Terminal Nut 360 view
Part Location Diagram of WPW10477552 Whirlpool Terminal Nut
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Terminal Nut WPW10477552

★★★★★
★★★★★
1 Review

Rated by 7 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 9.18
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11755402
Manufacturer Part Number WPW10477552
Manufactured by Whirlpool for Whirlpool, Kenmore, KitchenAid, Maytag
Troubleshooting
This part works with the following products:
Dishwasher.
Part# WPW10477552 replaces these:
AP6022073, 8268548, 8269630, W10274914, W10477552, WP8268548
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
3.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mark A - March 26, 2018
  Verified Purchase
Ok parts
Parts did not fit well had to force them together.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Heater element had shorted out and began to smoke
I released the heater element from the clips on the bottom of the waaher tub. I pulled the unit out from the wall and disconnected power. There are two slip on wire terminals on each end of the heater element accessible from the back that need to be removed. One of them was badly rusted from leaking water, which had caused the short, and had to be replaced. These terminals and the crimping tool to install them are available at any home center. I removed and discarded the old plastic nuts since one of them was damaged by arching from the short circuit. Moving around to the front of the dishwasher, I removed the old heater and installed the new one. I had ordered new rubber washers, but the new heater came with them already installed. Since one of the old ones failed and caused the leak, they are a good thing to keep around as spares anyway. I installed the new nuts and tightened them to enough to ensure that the washers made a good seal. I reconnected the wire terminals to the heater, reconnected power and moved the unit back into place. The circuit opening when the heater failed caused a "call for service" error and the controller would not allow the unit to run. You will know you have this by the "CLEAN" LED flashing seven times. Clear the diagnostics by pressing the buttons for "HEATED DRY", "NORMAL", "HEATED DRY", "NORMAL" and after the controller resets, the dishwaher is ready to run. It's worked like new ever since.
Read less
Other Parts Used:
Terminal Nut Dishwasher Heating Element Rubber Washer
  • James from McCordsville, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
25 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The green "Clean Light" was staying on after shutting down in the middle of the cycle. I put it in troubleshooting mode and found out it was the heating element.
Disconnect power Pull out dishwasher. Turn it 45 degrees to your right. Turn it on its side. disconnect the connections to the heating element {2}. Remove bolts, remove element. Install new element and tighten bolts. Reconnect electrical connectors. puch it back in place. reconnectPower your done
Read less
Other Parts Used:
Terminal Nut Dishwasher Heating Element
  • dan from Humble, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit Wouldn't Work. "Clean" Light Blinking
The unit had power, but the controls would not work. The "clean" light was blinking. I first replaced the control unit, no help. I then used the "just ask" and was told the problem was the heating element and/or the hi-temp thermostat. I replaced both those and used the re-set code pushing the "hi-temp/air dry, hi-temp/air dry" buttons. That did it. Easy parts to locate and replace. It took longer pulling the unit out and putting it back than it did to replace the parts.
Read less
Other Parts Used:
Dishwasher Heating Element Terminal Nut Rubber Washer High Limit Thermostat
  • PAUL from ESTES PARK, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
106 of 148 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not dry dishes
Turned off power, turned off water supply and diconnected, slid out dishwasher. Removed the spray wand and tilted dishwasher to access the two nuts and disconnet the wires. Removed the two nuts using a socket. Removed the old heating element and replaced with the new one secured with new nuts ( the old ones were fine but since I bought two new ones why not). Pluged the wires back up slid the dishwasher back in hooked up the water reinstalled the spray wand cut on the water and power. Good as new.
Read less
Other Parts Used:
Dishwasher Heating Element Terminal Nut Rubber Washer
  • David from Arab, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
22 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wouldn't heat water or dry dishes
Disconnected the power and hot water supply.
Removed mounting screws under the counter, and the lower panel screws to expose the leveling screws.
Backed the leveling screws up so that the unit would slide out more easily
Walked the unit out to where I could reach the back side.
Disconnected the two power wires from the heater coil (slide off)
Unscrewed the plastic nuts holding the heater in place and removed the heater coil.
Replaced the heater coil and nuts.
Reversed the process above to install.
Read less
Other Parts Used:
Dishwasher Heating Element Terminal Nut Rubber Washer
  • Philip from Sugar Land, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
16 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wouldn't work
Looked under machine, saw wire going to heater was burned off.Seal on heater failed, water leaked onto terminal, shorted and burned, ruined plastic terminal nut.Replaced heater and wire terminal, and nut, took minutes, works great.
Other Parts Used:
Dishwasher Heating Element Terminal Nut
  • Greg from Lebanon, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burning smell from dishwasher
So one day passing the dishwasher while it was running, I noticed a rather pungent burning smell. Yikes, I shut it off!
I took apart the pump housing at the bottom inside the dishwasher, expecting to find some kids toy plastic bit had got caught and had jammed the motor or something. But nothing there, and my dishwasher has a little screen to keep just such things from getting to the pump anyway. Hmmm.
So, ran the dishwasher again, seemed ok now.
A week later, same thing, burning smell. Pull it apart again, but no sign of trouble. But I know something is up, so I pull the kickplate and have a look underneath... Way at the back I see a red wire that looks a little melted, but it's hard to tell, so I pull the whole dishwasher out. Sure enough, one of the heater wires is melted and burned, and the plastic locknut holding that side of the heater is badly scorched. Looks like a little electrical fire, I'm lucky it didn't get out of hand!
The heater still tests ok with an ohmeter, but I don't trust it now - order the heater and replacement locknut and washers. Didn't need to order washers, they come with the heater, oh well.
Heater removal and replacement is very straight forward, but I added some high-temp gasket silicone sealant (Ultra Blue) around the seals as I think the original problem may have ben a bit of water leakage causing a short.
Took about an hour to pull the dishwasher out, remove the heater and install the new one, put a new terminal on the heater wire, and put the whole thing back under the counter.
Working great now. But not a problem I expected to have with a 2-year-old dishwasher!
Read less
Other Parts Used:
Heating Element Terminal Nut Rubber Washer Spring Grip Retainer
  • Jeff from Blaine, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
82 of 91 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jarom
January 9, 2019
Does this come with one or two nuts? Two are required for installation.
For model number 66512093K210
PartSelect logo
Hello Jarom, thank you for your question. This part is for one (1) terminal nut. You would have to order two (2) of this part number to receive both parts. Good luck with your repair!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Dishwasher Heating Element
32% OFF
$44.68
$66.09
  In Stock
Dishwasher Heating Element
29% OFF
$61.89
$87.61
  In Stock
Rubber Washer
$7.75
  In Stock
Shield
$7.82
  In Stock
Spring Grip Retainer
$8.04
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11755402
Manufacturer Part Number: WPW10477552
Brand
Model Number
Description
Kenmore
110723120
Dishwasher
Kenmore
66213032K112
Dishwasher - Dishwasher
Kenmore
66213273K112
Dishwasher - Dishwasher
Kenmore
665110739120
Dishwasher
Kenmore
665110739130
Dishwasher
Kenmore
665110739140
Dishwasher
Kenmore
665110739190
Dishwasher
Kenmore
66512093K210
Dishwasher - UNDERCOUNTER DISWASHER
Kenmore
66512723K310
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66512723K311
Dishwasher - DISHWASHER
Kenmore
66512782K310
Dishwasher - Dishwasher
Kenmore
66512783K311
Dishwasher - Undercounter Dishwasher
Kenmore
66512789K311
Dishwasher - Undercounter Dishwasher
Kenmore
66512833K311
Dishwasher - Kenmore Dishwasher Model 665.12833K311 (66512833K311, 665 12833K311) Parts
Kenmore
66513012K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513012K111
Dishwasher
Kenmore
66513012K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513012K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513013K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513013K111
Dishwasher
Kenmore
66513013K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513013K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513014K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513014K111
Dishwasher
Kenmore
66513014K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513014K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513019K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513019K111
Dishwasher
Kenmore
66513019K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513019K113
Dishwasher - UNDERCOUNTER DISHWASHER
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
Terminal Nut
$ 9.18
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.