EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

665110739120 Kenmore Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Rack Track Stop – Part Number: WP8565925
$9.62
In Stock
Dishwasher Rack Track Stop
★★★★★
★★★★★
(145)
Part #WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
Door Balance Link Kit – Part Number: 8194001
$29.47
In Stock
Door Balance Link Kit
★★★★★
★★★★★
(225)
Part #8194001
This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwasher door hinges. The kit includes two door balance links and two door balance mounts with wheels, which will replace both the left and right sides. The only tool needed is a 5/16 nut driver. Before removing the existing kit, take note of how the door balance link kit is assembled for a smooth replacement process. It is recommended to check the door springs in case they need to be replaced as well.
Dishwasher Upper Rack Wheel w/Mount – Part Number: WP8268655
$27.36
In Stock
Dishwasher Upper Rack Wheel w/Mount
★★★★★
★★★★★
(67)
Part #WP8268655
This is a replacement upper dish rack wheel with mount for your dishwasher. The mount supports the dish rack, and the wheel allows the rack to slide out easily. To replace this part, remove the rack stops and pull out the upper dish rack. This wheel mount pops off, and the new one can be snapped into place.
Dishwasher Mounting Bracket – Part Number: WP8269145
$15.00
In Stock
Dishwasher Mounting Bracket
★★★★★
★★★★★
(14)
Part #WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Dishwasher Upper Rack Wheel & Mount Assembly – Part Number: WP8270019
$11.77
In Stock
Chopper Assembly – Part Number: W10083957
$34.74
In Stock
Chopper Assembly
★★★★★
★★★★★
(62)
Part #W10083957
This is a chopper assembly or drain food chopper, and it is designed for your dishwasher. The chopper chops up/minces the food particles in your dishwasher to prevent them from clogging the pump. You may need to replace this part if your dishes are not being cleaned properly, your appliance is particularly noisy, or you are noticing draining problems. The tools you will need to make this repair include a number 20 and a number 15 torque screwdriver, a small flat blade screwdriver, and a pair of needle nose pliers.
Silverware Basket – Part Number: W10807920
$45.29
In Stock
Silverware Basket
★★★★★
★★★★★
(82)
Part #W10807920
This dishwasher flatware basket is designed to securely hold silverware and other small utensils during the wash cycle, ensuring thorough cleaning and preventing items from shifting or falling through the rack. Made from durable plastic, the basket features multiple compartments to organize flatware efficiently. While the design may differ slightly from the original part due to updates, it maintains full compatibility and functionality. It fits into the lower rack of the dishwasher and is an ideal replacement for a damaged or missing basket, helping restore optimal cleaning performance.
Fuse Kit – Part Number: 8193762
$57.56
In Stock
Fuse Kit
★★★★★
★★★★★
(21)
Part #8193762
When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.
Door Gasket – Part Number: W11196317
$78.28
In Stock
Door Gasket
★★★★★
★★★★★
(29)
Part #W11196317
This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to replace the door seal if you are experiencing leaking from the front of your dishwasher. Once you have removed your old seal, we recommend inspecting the groove to make sure there are no food particles or debris caught inside that will impede the installation process.
Rubber Washer – Part Number: WP717273
$7.47
In Stock
Rubber Washer
Part #WP717273
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where the heating element is attached. The rubber washer is used to prevent water leaking from your dishwasher during its cycle. Before making any repairs to your dishwasher make sure that you disconnect the power by finding the breaker for the dishwasher, and turning it off. The tools you will need to complete this repair include an adjustable wrench, and a 1/4 inch nut driver. This specific rubber washer is sold individually.
Tine Row – Part Number: W10728160
$48.45
In Stock
Tine Row
★★★★★
★★★★★
(41)
Part #W10728160
The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your current tine row is damaged, you should consider replacing it. This product is made of gray plastic and is approximately 21 inches in length. This tine row contains 11 straight tines and 1 curved tine. This product is sold individually. Many of our customers have rated this repair as very easy. To complete this repair, simply remove the old tine row and replace it with the new one.
Dishwasher Detergent And Rinse Aid Dispenser – Part Number: WP8558129
$60.51
In Stock
Dishwasher Detergent And Rinse Aid Dispenser
★★★★★
★★★★★
(36)
Part #WP8558129
This part releases the detergent and rinse aid into the dishwasher.

Common Symptoms of the 665110739120

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced Hinge Link
636 of 690 people found this instruction helpful.
  • Scott from Fort Lauderdale, FL
  • Easy
  • Less than 15 mins
  • Screw drivers
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
Was this helpful?
Thank you for voting!
Dishes on top rack of dishwasher were not being cleaned.
338 of 380 people found this instruction helpful.
  • Bill from North Richland Hills, TX
  • Easy
  • 30 - 60 mins
  • Pliers
1) Remove top and bottom dish baskets from the dishwasher, this will give you room to work. To remove top basket there are clips at the end of the slide rails.
2) Remove lower spray arm by unscrewing plastic screw, it should only be hand tight.
3) In order to remove the strainer cover, you will need to remove the plastic tube th at takes water to the middle and top spray arms. Unclip this tube from the top and middle clips and then work it out of the strainer assembly tube. Now you should be able to remove the tube at the bottom of the dishwasher by unscrewing it 1/4 turn.
4) Remove the strainer cover by unscrewing the 4 Torqs screws.
5) You will now see two smaller torqs screws that hold the hold the Chopper Assembly cover down. Take these two screws out and remove the two piece cover.
6) Pull out the broken Chopper Assembly, make sure you get all the pieces!
7) Install the new Chopper Assembly. Make sure that you install the Assembly with the small part of the screen towards the bottom of the housing. Also make sure you compress the spring as you install the part. I used a small pair of neddle nose pliers to compress the spring behind the screen in order to install the chopper assembly.
8) Put everything back together and make sure it works!
Was this helpful?
Thank you for voting!
Loud grinding noise from water pump
226 of 260 people found this instruction helpful.
  • Steve from Inver Grove Heights, MN
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Rather than remove the pump assembly - as an earlier post had done - I pulled the entire dishwasher out and laid it down on the floor. This allowed easy, direct access to the motor (that was the hard, messy part). From this point it was easy. Unplug the wiring, remove the retaining bolt, rotate the motor off the mounting brackets and pull it out. Then put the new one in. That was the easy part (about 15 minutes). The entire job took 2-and-a-half hours, most of which was taken in disconnecting, cleaning up and reconnecting the dishwasher. It's much quieter now.
Was this helpful?
Thank you for voting!