Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ronald A - October 9, 2022
Verified Purchase
Great part, Easy repair!
The part was in great condition, my washer works great now!
★★★★★
★★★★★
Dwight B - December 3, 2021
Verified Purchase
Repair went well
Part did the job & came at reasonable time
★★★★★
★★★★★
GARY B - January 23, 2020
Verified Purchase
Worked as expected
There CSR knew exactly what the problem was and provided the right part. Washer works great now!!
★★★★★
★★★★★
Brock W - April 4, 2019
Verified Purchase
Exactly what we needed.
Fast shipping to boot! Would have waited weeks for a repair company in our town to order the part and do the job!
★★★★★
★★★★★
Vincent F - November 12, 2018
Verified Purchase
Part was great
The part was in good condition. No fitment issues shipped and arrived promptly.
★★★★★
★★★★★
Doug H - April 17, 2018
Verified Purchase
Worked just fine
Worked fine. Just like original
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Juvenal
December 17, 2021
MY WASHER SHOWS ERROR CODE E01 F09 MID CYCLE - COLD WATER IN TO THE WASHER IS VERY SLOW. WILL THIS PART FIX THE PROBLEM
For model number MHW7000XGO
Hi Juvenal,
Thank you for your question. The E01 F09 error code means that the drain time has lasted longer than 8 minutes and there may be an issue with either the drain pump, the pressure sensor or the electronic control board. If you are using the wrong detergent in your washer this can lead to a long drain time and the code will appear. Make sure also that the drain hose is not bent and that it is positioned correctly. Check and clean the drain pump filter if there is any debris in it and make sure the connections to the pressure hose and the pressure sensor are fitted correctly. We hope this helps! If you have any questions, please let us know.
Machine allows water to slowly pool in drum after machine is off. Spins out fine but water pooling appears in drum days later.
For model number Wfw9750ww01
Hello Susan, thank you for your question. Your washer may have a clogged drain hose or the pump may be broken. If the pump is broken, you'll probably hear sounds when the machine is running. Your washer has a filtering device down and near the pump called a drain filter, check this filter for debris. You can test the drain pump with a multimeter. Unplug the appliance from the electrical outlet before you begin. Touch a probe to each of the terminals on the pump. A reading of zero or infinity, means the pump requires replacement. Part number: PS1485610. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
softener is not adding to loads tray gets little to no water flushing it into cycle will replacing this valve resolve this problem
For model number WFW92HEFBD
Hi Ken, thank you for the question. According to our research, the problem appears to be with the Dispenser Actuator, part number PS11753574. The Dispenser Actuator attaches to the top of the dispenser and helps direct water to the detergent, bleach, or fabric softener cups. If that does not help, then we would recommend checking the Water Inlet Valve, part number PS11750866. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Like Susan’s problem; after the washing machine has completed cleaning there is no extra water in my drum. I can remove clothes and put them in my dryer. However. There remains a slow water leak coming from the top left of the machine internally. It’s like the water shut off is not completely off. After 12 hrs. there is a pool of about a gallon of water. What part do I need to replace to fix this? I already checked the drain and pump and they are working fine.
For model number WFW95HEXL2
Hello Paul, thank you for your inquiry. We would recommend checking the water inlet valve, part number PS11751015, to fix the issue. It controls the water flow into the washer. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
