This part attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Maytag.
Part# WPW10156253 replaces these:
AP6015883, W10156253
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
3.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tom H - March 3, 2019
Verified Purchase
Whirlpool Duet Valves missing insulator
Able to install easily, however, frustrating to pay the amount I did for a quality valve but having the plastic connector insulator missing and bent. I cracked an insulator off the old valve and super glued it to the new valve, therefore, making it workable. This was not due to shipment damage but had to be due to lack of inspection, hopefully not lack of concern, before being sent. There were no insulator pieces in the shipment box, therefore, it was prior to shipment that the part was defective. Who wants to hassle with sending back something defective and wait another week to get your clothes washer running, therefore, I made the valve that was sent work okay.
★★★★★
★★★★★
David L - October 11, 2018
Verified Purchase
Exact replacement
The valve was easy to replace. Washer is now working fine.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was giving F20 F35 and SUDS error messages
After replacing the Water Inlet Valve and Flowmeter the F20 error message stopped. However, after ordering and replacing the Water Pressure Sensor the F35 error message and the SUDS error message stopped and the washer is finally working.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
August 13, 2019
The f20 display. The problem has been going on for years. What i have been doing is removing the hot and cold water hoses an d hooking them up again and it would work again for a while. Will replacing the water inlet valve solve the problem?
For model number WFW9600TW00
Hi Charles, thank you for your question. Yes that error code means that the machine is not detecting any water going into your machine. You may want to check the hoses for kinks or any blockages. If there are not any then test your water inlet valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Vincent
January 25, 2023
Water for the softener does not flow in when needed. not enough to flushed it down
For model number WFW9600TW01
Hi Vincent,
Thank you for your question. If your washer is not filling with water, there are some parts that you will need to check to see which one is causing the issue. You will need to check the inlet hoses and screens, the water inlet valve, the door lock, the water level pressure switch and the electronic control board. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
