Lint Filter WP33001808 | Official Whirlpool Part | Fast Shipping | PartSelect
Lint Filter – Part Number: WP33001808
Lint Filter – Part Number: WP33001808 Lint Filter – Part Number: WP33001808 https://partselectcom.azureedge.net/Schematics/Maytag/59071.gif

Lint Filter

Product Description

Lint Filter Specifications

This is a replacement lint filter for your dryer. The lint filter is approximately 12 1/2 inches in length. Simply remove the existing filter and replace it with the new one. Check for an excess buildup of lint when changing the filter, and clean it after every use.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Takes too long to dry, Touchpad does not respond, No heat or not enough heat.

This part works with the following products:

Dryer, Washer Dryer Combo.

This part works with the following brands:

Maytag, Crosley.

Part # WP33001808 replaces these:

33001808, WP33001808VP.
Part Videos

Replacing your Maytag Dryer Lint Filter

Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 54 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Anthony from DeKalb, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP33001808
Lint into venting area.
Removal of old lint collector and replace with new one.
502 of 514 people found this instruction helpful.
Was this instruction helpful to you?
Ron from Monte Vista, CO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP33001808
The old lint screen had a couple tears in it
No problem at all, just took out the old one in front and slid in the new one.
376 of 381 people found this instruction helpful.
Was this instruction helpful to you?
Alexander from Lakeland, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP33001808, WP33001621, WP90767
Broken Dryer Knob
First let me just say that Partselect.com is now one my stored favorites in my web browser. I came home from a business trip and saw a pair of pliers on the dryer. I thought that was odd until my wife informed me that the knob on the dryer had broken. So she was using the pliers to select the cycle. Somehow she knew where the missing pointer was actually pointing. Since the dryer was over 5 years old I saw this as an opportunity to upgrade both appliances. Not with my frugal wife. A search of the Internet popped up partselect. I ordered Wednesday morning and the parts where on my doorstep late Thursday. Trust me I was very surprised. Everything worked perfectly. Two thumbs up!!!
112 of 193 people found this instruction helpful.
Was this instruction helpful to you?
Susan from Seneca, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP33001808
Lint filter had gotton broken
Just put the new one in. I also would like to tell you that I was VERY PLEASED with the service I received from your company. The part arrived very fast. Thank you very much. I will use your service again and will recommend you to others.
85 of 147 people found this instruction helpful.
Was this instruction helpful to you?
catherine from metter, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP33001808
large tear in the mesh
no repair needed but the part could not be found in the area i live . ordering was easy and deliver time quoted was very resonable but the part came the very next time that was wonderful.
73 of 136 people found this instruction helpful.
Was this instruction helpful to you?
JOSEPH from WARWICK, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP33001808
Worn out lint filter.
Very easy with a tip from the video that was provided from Parts Select.
Thank You
Joseph Errico
69 of 131 people found this instruction helpful.
Was this instruction helpful to you?
Sandy from Ankeny, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP33001808
The Lint Filter was ripped.
I put the new one in . Nothing to it.
66 of 130 people found this instruction helpful.
Was this instruction helpful to you?
William from Jennings, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WP6-3700340, WP6-3129480, WP33002535, WP33001808, 12001541
This unit is a combination Washer/Dryer and a squealing noise started in the dryer.
It was obvious that the noise was coming from the drum support rollers. All of the ordered merchandise came quickly and as ordered. Be sure to order 2 drum roller kits and 2 roller shafts because there are 2 on the machine. Disconnect the power to the machine. Take the panel directly above the washer door off. Take the control panel off, but no need to disconnect the controls. There are a few wires that you will have to remove from the door, so make a note as to how these are put on so you will get them back correctly. Remove the dryer door. Once the two panels are removed you can see the dryer motor and Idler Pulley. Draw a picture as to how the belt goes around the motor pulley and the idler pulley. Slip the belt off of the motor pulley and carefully remove the dryer drum. When you accomplish this, you can see the drum rollers and the idler pulley very well. Take a half inch wrench and take the drum roller shaft off. Take the retainer off the roller and replace both the roller and shaft with a new one because if it is squealing this is probably the wise thing to do, as the bearing rolls over the shaft. Replace the washers onto the shaft along with the roller and reattach to the dryer. I replaced the Idler Pulley wheel and bearing as a precaution to avoid having to go into the machine again. (Note) it is held on with a C clamp that you can remove with a screw driver. I also ordered a lint filter as mine was slightly worn. I also ordered a new belt because the machine was 11 years old and the old belt was slightly cracked. When putting the new belt on, be careful to put the rib side next to the dryer drum. Place the belt over the back part of the dryer before putting the drum into the machine. Once the drum is placed into the machine and before putting the drum on the rollers you reach into the back and get the belt and place the rib side over the drum and onto the pulleys the same way that you drew your picture. Once the belt is on the idler pulley and motor pulley you can raise the drum up over the rollers and then spin it around a few times to see that the belt isn't kinked and that the drum and blower move as they should. Make certain the rib side is next to the drum and that it is installed like your picture. I took the blower cover loose and some other parts while I was in the machine and vacuumed it out good to prevent fires and to make certain that it was free of lint. Put everything back and the machine works like new.
20 of 885 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Menomonee Falls, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WP33001808, 33001799
rodent entry through vent,chewed parts,(distroyed).
Removed the door and machine front.replaced old duct assembly with new ,and reassembled front.
13 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Vicki from Springfield, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP33001808
Drying time was taking longer than it should.
I simply went on line and ordered the part. I had it shipped to my office since I am here all day, M-F. I received the part in 2 days. I took it home, pulled out the old lint filter and slid in the new one. It is amazing how much more efficient my dryer is. The old lint filter had about a 6 inch tear in it so it was not catching all the lint.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
39 Reviews
4.4
out of 5
Filter By Rating:
  • 5 Stars
    28
  • 4 Stars
    6
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Stars
    3
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11741075
Manufacturer Part Number: WP33001808
Brand
Model Number
Description
Crosley
CDE4205AYJ
Dryer - Residential
Crosley
CDE4205AYW
Dryer - Residential
Crosley
CDE4205AZJ
Dryer - Residential
Crosley
CDE4205AZW
Dryer - Residential
Crosley
CDG4205AWJ
Dryer - Residential
Crosley
CDG4205AWW
Dryer - Residential
Maytag
MDB9206AWW
Dryer - Maytag Dryer Model MDB9206AWW Parts
Maytag
MDE16CSAYQ
Dryer - Commercial
Maytag
MDE16CSAZQ
Dryer - Commercial
Maytag
MDE16PDAYQ
Dryer - Commercial
Maytag
MDE2300AYW
Dryer - Residential
Maytag
MDE2300AZW
Dryer - Residential
Maytag
MDE2301AYW
Dryer - Residential
Maytag
MDE2301AZW
Dryer - Residential
Maytag
MDE2500AYW
Dryer - Residential
Maytag
MDE2500AZW
Dryer - Residential
Maytag
MDE2600AYW
Dryer - Residential
Maytag
MDE2600AZW
Dryer - Residential
Maytag
MDE3000AYA
Dryer - Residential
Maytag
MDE3000AYW
Dryer - Residential
Maytag
MDE3000AZA
Dryer - Residential
Maytag
MDE3000AZW
Dryer - Residential
Maytag
MDE3050AGW
Dryer - Residential
Maytag
MDE3500AYQ
Dryer - Residential
Maytag
MDE3500AYW
Dryer - Residential
Maytag
MDE3500AZW
Dryer - Residential
Maytag
MDE3600AYQ
Dryer - Residential
Maytag
MDE3600AYW
Dryer - Residential
Maytag
MDE3600AZW
Dryer - Residential
Maytag
MDE4000AYQ
Dryer - Residential