This part is used as a safety feature. If your range overheats this part will shut the range down.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Oven is too hot | Element will not heat | Little to no heat when broiling
This part works with the following products:
Range, Microwave Oven Combo.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Amana.
Part# WP3196548 replaces these:
AP6007866, 313214, 3147620, 3196548
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
41 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tracy
October 23, 2019
The front 2 burners seem to take much longer to heat up to desired temp but the back burners seem to work fine. What could be the problem? Thanks
For model number RF362LXTT0
Hi Tracy,
Thank you for your question. If the front 2 burners are not heating correctly the issue would be the burner switches and you will need to replace them. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Fred
December 18, 2019
Oven says it is 350 degrees on control, but does not bake very fast. Set temperature higher but still does not seem to be hot enough. Bottom element turns red momentarily. Would this be a sensor problem? Or could this be a thermo fuse problem?
For model number 665.95172300
Hello Fred, thank you for your inquiry. If the temperature sensor inside the oven is not working as intended, it can cause the oven to not heat to the correct temperature. I hope this information helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Cyrus
January 15, 2018
Oven won't turn on. Says contact service fae0 cooling fan speed to low
For model number WEC530H0DW0
Hi Cyrus,
Thank you for your question. If you are getting the FAE0 error code, then there could be an issue with either the airflow in the oven, the oven cooling fan or the wiring connected to it. To try and fix the issue, turn the circuit breaker off for one minute and then turn it back on. Wait at least one minute to see if the error code comes up again. If it does, you may have to have a repairman come out and see what is causing the issue. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
November 9, 2018
The oven is overheating. Set to 350 degrees and oven heats to 400 degrees or more. Replaced the temp sensor two days ago. Worked for a day.
For model number WFE540H0AS0
Hello Brian, Thank you for the question. The next part to check would be the Safety Thermostat, PartSelect Number PS11740991. If this part is defective it may also burn the Temperature sensor . Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Glen
March 9, 2020
My top heating element in my oven is working, but the bottom does not, i just replaced it with a new one and still does not work. Could a sen sir not be working.
For model number Kers202bsso
Hello Glen, thank you for writing. We advise testing the Sensor as it could be at fault.Oven Sensor - Part# PS11749737. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
Clock is on but oven only goes to 180 and none of the top burners work
For model number wfe715hoeso
Hello Steve,
Thank you for your question. Our sources suggest replacing the electronic control board under part PS11753212 for your model to fix the issues. Hope this helps!
My bake element gets warm, but not hot. The broil works perfectly, temperature sensor works, but bake element will not glow red, only gets warm to the touch. I replaced the element thinking that that may be the problem, but same issue. Terminal tested and appears in good working order. All other functions work. Could it be the safety thermostat causing the issue?
For model number WFE320M0ES2
Hello Tyler, thank you for your question. According to our research, if you have already tested the temperature sensor then the issue is probably with the Thermostat, part number PS11740991. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
February 4, 2019
My oven is burning top of food on bake. The broil element is staying on in bake mode. What might be the problem and how do i diagnose it?
For model number mer8880as
Hello Richard, thank you for your question. The first part we would suggest testing is the sensor PartSelect Number: PS11749737. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If that part is tested and is functioning correctly, the issue would be the oven control board Part Number: PS11753216. I hope this helps!
Four months ago, my left front eye (with accusimmer) quit heating in both modes. A repairman replaced the infinite control switch (p/n wp3149400) and the eye worked until 2 weeks ago when it quit again. I ordered and installed another switch, which did not solve the problem. Is there a thermocouple or fuse that protects only the power to the left front or could it be another issue?
For model number RF388LXKQ0
Hello George, Thank you for the question. Unfortunately it sounds like the element may be defective. When the switch stopped working it could have out a strain on the element. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ginny
November 20, 2017
I have an oven not turning on. The stove top elements work but no heat in the oven at all. Will the safety thermostat (part #wp3196548 manufacturer #) only turn off the oven or does it turn off the stove top as well? If it turns off the stove top at the same time then this will not be the issue.
For model number RF 3020XGW0
Hi Ginny,
Thank you for your inquiry. If the oven is not heating you will need to check both oven heating elements and the oven thermostat. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Whirlpool Range Safety Thermostat
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven would heat up very slowly and not reach more than 325 *F
I purchased all the likely suspects. It was a corroded lower heating element that was faulty. Fixed the burnt out light bulb for good measure while I was in there.
The oven light shorted out causing the safety thermostat to blow.
Replaced the safety thermostat and disconnected the oven light. Works great again...without the light
Joseph K from PAHRUMP, NV
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Patraic C - November 10, 2020
Verified Purchase
Safety Thermostat for Whirlpool stove.
The part came just a few days after being ordered. I followed the video provided by PartSelect and had the part installed and the stove working within thirty minutes. I would give them more than 5 Stars if I could. Highly recommend them!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
