Drive Shaft Coupling Sleeve WP2315559

Hello Jules, thank you for your question. To replace this part, first unplug the fridge. Open the freezer door, and take the ice bucket off and set it aside. Next, take the hold out and use a 1/4 inch socket and ratchet to take out the screws. Once you have both screws out you can lift the holder out and you should be able to view the sleeve. Use piers to lift the shaft up and out of the unit. If it doesn't come up easily, you may have to jiggle it back and forth to break it free. Once the shaft is up, remove the seal and set it aside. You can remove the drive shaft completely. Once the drive shaft all the way out the sleeve would be removed. If is is stuck on with rust you may need to use some penetrating oil on it and work or tap it off. Once the old sleeve is off you can replace it with the new one and reassembly by following the previous steps! I hope this helps!

Hello Jules, Thank you for the question. If the shaft needs to be replaced you should be able to see wear or damage. The motor might make a grinding noise or not run when defective. You can also test with a multi meter to see if there is continuity. If you can submit a question with the symptoms your appliance is having we can look into the is for you and help you trouble shoot. Looking forward to hearing from you!

Hello Tom, Thank you for contacting us. I suggest checking the following two parts: PS869316 Ice Maker Assembly - 8 Cube and PS11723180 Ice Door Kit. Good luck with your repair!

Hello Jagdeep, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11740363. Hope this helps!