This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, and much more, this filter provides delicious and healthy drinking water. This filter measures 2 inches deep, 9 inches high, 2 inches wide, and weighs 0.9 lbs. The installation is quick and easy with a push and twist feature. Don't forget to run water through the dispenser for about three minutes or 1.5 gallons to prepare the filter before use. For best performance replace this filter every six months.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Donald W - October 22, 2023
Verified Purchase
right on
As advertised
★★★★★
★★★★★
Victor S - June 23, 2022
Verified Purchase
As easy as described
Water Filter
★★★★★
★★★★★
John S - January 16, 2022
Verified Purchase
Ease of changing
Part arrived on time. Upon receipt, installed filter, followed recommended instruction. Refrigerator back to normal making ice
★★★★★
★★★★★
Lenette S - December 4, 2021
Verified Purchase
easy
will order this part again..
★★★★★
★★★★★
Gail H - November 19, 2021
Verified Purchase
easy to instal
part was easy to instal. works great as it should
★★★★★
★★★★★
Frederick K - October 26, 2021
Verified Purchase
Easy Peezy!
Took a picture of the tag inside refrigerator and the web site took me right to the part. Ordered it and it came within 10 days. One little twist and the old one popped out and I put the new one it.
★★★★★
★★★★★
Peter B - September 28, 2021
Verified Purchase
Gherkin
Glad to have a filter
★★★★★
★★★★★
Melanie S - August 24, 2021
Verified Purchase
Worked as expected
Great condition
★★★★★
★★★★★
Dennis T - January 20, 2021
Verified Purchase
Easy to purchase
Part is great
★★★★★
★★★★★
JOYCE G - February 16, 2019
Verified Purchase
Easy install
No problems with install, went very well. thanks
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drawers were not packaged properly. Had a broken piece on arrival.
I can’t repair them. A piece broke from both drawers. They weren’t packaged properly. I didn’t even see fragile on the outside of the box. I need to return the drawers. I tried to go to The postal office but they’re charging over 100 dollars to ship both items. I shouldn’t have to pay for shipping. I need these items resent but pa
... Read moreckaged properly to avoid damage please.
Water filter a bit stubborn but resolved. Other questions ~ see below
When reading instructions, I noticed it said to run water through the water filter. I don’t have a water dispenser ~ I only occasionally make ice. So how often should I change, Barely used. The red light will go on, can I just ignore it?
Twist to remove the old one an twist to install the new 9ne
Lewis from JONESBORO, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
WATER FILTER EXPIRED
REPLACED WITH NEW. HOWEVER, THE WATER FILTER INDICATOR STILL SAYS 'REPLACE'. THERE IS NO LEAKAGE, BUT IT APPEARS LIKE THE NEW CARTRIDGE IS NOT COMPLETELY INSERTED. I'VE TRIED REMOVING AND REPLACING THE NEW CARTRIDGE SEVERAL TIMES, BUT IT STILL SAYS 'REPLACE'. INCIDENTALLY, THIS WAS THE SECOND ORDER OF THE CARTRIDGE AND LAS
... Read moreT TIME I GOT TWO, AND THEY BOTH FIT FINE! WITH THIS ORDER I GOT JUST ONE.
Read less
Bo from SUN CITY WEST, AZ
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
8 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change filter
When removing existing filter you will experience some resistance at the 10-4 position which requires a little extra pressure to reach the 9-3 position.
Claude from MARYVILLE, TN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
19 of 36 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
25 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
January 2, 2020
I cannot remove old filter.
For model number FGSC2335TF5
Hi William,
Thank you for your question. Here is information from your owner's manual on hot to remove and install a water filter in your refrigerator: It is not necessary to turn the water supply off
to change the filter. Be ready to wipe up any small amounts of water released during the
filter replacement. 1 Turn Off the ice maker power switch.
2 Remove the old filter by rotating it counterclockwise (to the left) 90 degrees to release it.
3 Slide the old filter cartridge straight out of the housing and discard it.
4 Unpackage the new filter cartridge. Slide it into the filter housing as far as it will go with the grip end horizontal.
5 Push lightly inward on the filter while rotating it clockwise (to the right). The filter will then
pull itself inward as it is rotated. Rotate the filter 90 degrees until it stops and the grip end is vertical. You may be able to feel a very light click as the filter locks into place. 6 Press a drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters
that occur as the system purges air out of the dispenser system are normal. 7 Continue dispensing water for 3-4 minutes or until 1.5 gallons of water has flowed through the system. You will likely need to empty and refill your glass several times. 8 Turn On the ice maker. 9 Press and hold the Water Filter reset button on the control panel for three seconds. When the display changes from
Red to Green, the status has been reset. We hope this helps. Thank you and have a great day!
27 people found this helpful.
Was this helpful?
Thank you for voting!
Tia
April 3, 2019
How often should filters be changed?
For model number EPTWFU01
Hello Tia, Thank you for the question. This Filters water of impurities for up to 6 months. Hope this helps!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Phillip
June 13, 2019
I changed the water/ice filter because the pink "order" light appeared. Question is, "how does one get the "pink order" light to go off ?"
For model number LFHB2751TF5
Hello Phillip, Thank you for the question. You will need to Press and Hold the Reset Button Until the Indicator Light Flashes and turns off. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
BARBARA
January 23, 2018
I'm looking for a water filter bypass/plug since the refrigerator water system is hooked up to my ro system.
For model number LFHB2751TF0
Hello Barbara, Thank you for your inquiry. Part# 807946702 is the water filter bypass. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia Krawec
September 9, 2019
Will water filter #ps11704498 work on Frigidaire model lghx2636tf4
For model number LGHX2636TF4
Hello Patricia, thank you for your question. Yes, this is the correct filter for that specific model. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
John
March 23, 2018
Out of water filters. How long will it take for delivery to bethlehem, ct 06751? Fedex? It's?
For model number FRIGIDAIRE WATER FILTRR EPTWFU01
Hello John, Thank you for your inquiry. The shipping options we have are based on bulk rates and not time or distance. They are as follows: EconoShip (USPS) (Usually 3-7 Business Days) for $6.95, Standard Shipping through FedEx/UPS (Usually 2-3 Business Days) for $9.95, and Next Business Day (FedEx overnight) for $24.95. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Chady
January 17, 2020
I'm looking for a water filter bypass/plug since the refrigerator water system is hooked up to my or system.
For model number FPBS2778UF3
Hello and thank you for writing.
The bypass part number: PS12718734 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
I need a bypass insert for the fridge, my water supply is on an RO system
For model number FGSC2335TFB
Hello Gary, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12718734 for the Filter Bypass. We hope this helps!
What is the part number for the water filter bypass, Frigidaire model LGHK2336TF8 (it’s not in the compatible list). Thank you
For model number LGHK2336TF8
Hello Sally, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12718734. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello,
Thank you for your question. The part number listed under your model number for the water filter is PS11704498. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.