Murray Lawn Mower Control Cables
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Murray Lawn Mower Control Cables
Your Price
$21.29
On Order
Murray Lawn Mower Cable-control 37.5
PartSelect Number PS19305064
Manufacturer Part Number 946-04661A
This control cable is designed for walk-behind lawn mowers to safely engage and disengage the blade during operation. Constructed with a durable metal inner cable and a protective rubberized outer sheath, it transfers motion from the control handle to the braking mechanism. When the control handle is released, the cable activates the blade brake to stop the blade quickly for added safety. Replacing a worn or broken control cable restores proper blade control, ensures the brake disengages correctly when the lever is pressed, and helps maintain safe, reliable mower operation during routine lawn care.
Murray Lawn Mower Engine Control Cable
PartSelect Number PS9015022
Manufacturer Part Number 532183567
This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized protective cover, and a plastic mounting clip. This essential component connects the control handle to the engine brake system, stopping the blade when the handle is released to ensure safe operation.
If the cable is broken, the brake may remain engaged even when the lever is pressed. Replacing the cable is a straightforward process that may require a pair of pliers. Begin by identifying where the old cable is attached to the motor assembly and remove it. Install the new cable in the same location, then route it up to the control handle. Insert the Z-shaped end into the hole in the control handle, just as with the original cable. Once both ends are connected, remove the upper mount of the old cable from the handle and secure the new one in its place. Finally, tie the cable in the same manner as the original, ensuring there is enough clearance and free play to prevent over-bending or premature wear. This replacement restores proper blade control and helps maintain safe mower operation.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
James from ASHTABULA, OH
Cable was broke.
Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.
Read more...
Murray Lawn Mower Cable:engagement D
PartSelect Number PS10033928
Manufacturer Part Number 946-04173E
This cable is an original part from Craftsman for lawn tractors. This part pivots and pulls the belt idler pulley to fasten the belt and spins the cutting blades. It is recommended that you wear gloves before installing this part. You will need a pliers and a screw driver to replace this part. This cable is made of made of rubber, metal, and wire components.
Murray Lawn Mower Drive Cable
PartSelect Number PS16463572
Manufacturer Part Number 946-04728A
This is an authentic replacement part that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. The drive cable stops the engine when a user lets go of the operator presence handle. When the brake cable is damaged or broken, the mower becomes temporarily inoperable requiring a replacement cable. Please note this high-quality durable rubber insulated cable is sold individually.
Murray Lawn Mower Zone Control Cable
PartSelect Number PS9180334
Manufacturer Part Number 946-1130
This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pressed, the cable activates the blade rotation; releasing the handle stops the blade, ensuring operator safety.
This specific part features a 40-inch covered housing with a total cable length of 53 inches, including 13 inches of exposed cable. It is sold individually and includes all necessary components for straightforward replacement. Please note that part number 946-1137 features a fully covered cable with a length of 53 inches. To ensure proper fit and function, carefully compare your existing cable before ordering.
Fixes these symptoms
- Will Not Start
- See more...
Murray Lawn Mower Engine Zone Control Cable
PartSelect Number PS9014267
Manufacturer Part Number 532183281
Made of a durable metal with a plastic cover, this cable is used to control the on/off function of the engine on various lawn mowers. It is not part of a kit or assembly, it is black, and it is sold individually.
When this part is broken or worn, you will be unable to start the engine, at which point it needs to be replaced. No tools are needed to complete this repair.
Customers rated this repair as Easy.
Murray Lawn Mower Cable
PartSelect Number PS16463810
Manufacturer Part Number 946-1113A
This control cable is specially designed for use with walk-behind lawn mowers. It is supplied by the original equipment manufacturer. The cable is utilized to engage the blade. This part is connected to the control handle, over time it may wear out or get damaged eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the exact location and the correct installation. One durable rubber insulated cable is included. You may need pliers and a screwdriver to disconnect the old part and attach the new one.
Murray Lawn Mower Throttle Cable
PartSelect Number PS12609193
Manufacturer Part Number 582991501
Genuine OEM replacement part, this item is sold individually. The Engine Control Cable connects to the Control Bar and to the Engine. The Control Bar has to be pulled up for the Engine to start. Once you let go of the Control Bar the Engine Control Cable will cause the Engine to stop running.
Murray Lawn Mower Cable-ers Control
PartSelect Number PS10033969
Manufacturer Part Number 946-04703A
This is a genuine replacement component which is supplied directly from the original equipment manufacturer for use with walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. Please note this high-quality rubber insulated metal cable is sold individually.
Murray Lawn Mower Control Cable
PartSelect Number PS12604727
Manufacturer Part Number 532162778
The engine zone control cable stops the blade when the control handle is released on walk-behind lawn mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed. This is a genuine OEM sourced replacement part that is designed for use with lawn mowers. Please note this durable metal rubber insulated cable is sold individually.
Related Murray Lawn Mower Parts
- Murray Lawn Mower Bags
- Murray Lawn Mower Bearings
- Murray Lawn Mower Belts
- Murray Lawn Mower Blades
- Murray Lawn Mower Brackets and Flanges
- Murray Lawn Mower Caps and Lids
- Murray Lawn Mower Carburetors
- Murray Lawn Mower Deflectors and Chutes
- Murray Lawn Mower Engines
- Murray Lawn Mower Exhausts
- Murray Lawn Mower Filters
- Murray Lawn Mower Grilles and Kickplates
- Murray Lawn Mower Handles
- Murray Lawn Mower Hardware
- Murray Lawn Mower Hoses and Tubes
- Murray Lawn Mower Ignitions
- Murray Lawn Mower Knobs
- Murray Lawn Mower Latches
- Murray Lawn Mower Lights and Bulbs
- Murray Lawn Mower Panels
- Murray Lawn Mower Pulleys
- Murray Lawn Mower Seals and Gaskets
- Murray Lawn Mower Seats
- Murray Lawn Mower Spindles
- Murray Lawn Mower Springs and Shock Absorbers
- Murray Lawn Mower Starters
- Murray Lawn Mower Switches
- Murray Lawn Mower Transmissions and Clutches
- Murray Lawn Mower Wheels and Rollers
- Murray Lawn Mower Wire Plugs and Connectors