Murray Lawn Mower Belts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Murray Lawn Mower Belts
Murray Lawn Mower V-belt
PartSelect Number PS9011522
Manufacturer Part Number 532144959
This is a genuine replacement belt sourced directly from the original manufacturer, designed for use with riding lawn tractors and mowers. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a critical component for cutting performance. To ensure optimal function and longevity, it’s important to clean the pulleys before installing the new belt and to inspect the belt regularly for signs of wear or stretching. Replacing the belt requires a wrench set and pliers. For safety, always disconnect the spark plug wire before beginning. Start by lowering the mower deck to its lowest position and setting the blade engagement lever to the "Off" position. Roll the old belt off the engine pulley from between the belt guide and pulley. Remove the mower deck by taking out the bow-tie pins securing the left and right lift arms, then disconnect the blade engagement cable. Next, remove the bolts from the mower deck belt pulley covers and take off the covers. Loosen, but do not remove, the nuts on the top of the idler pulleys. Install the new mower deck belt through the belt guides and around the pulleys, then tighten the idler pulley nuts. Finally, reassemble the deck to complete the repair and restore your mower’s cutting performance.
Lawn mower deck belt. Width: 1/2 " Length: 95 1/2 ".
Murray Lawn Mower Guard, Belt
PartSelect Number PS17016481
Manufacturer Part Number 531165901
This genuine OEM belt guard is designed for use with lawn tractors and riding mowers manufactured by Husqvarna, Ryobi, Poulan, Weed Eater, and Jonsered. Positioned between the washer and the arm idler, it helps guide the belt and maintain proper alignment during operation. Made of durable metal, this part should be replaced if it becomes damaged or broken. It is sold individually, and tools such as a set of pliers, a socket set, and a wrench set may be needed for installation. For accurate placement, refer to your model’s diagram.
Murray Lawn Mower Belt Spindle
PartSelect Number PS9072068
Manufacturer Part Number 7022252YP
Get your lawn tractor running smoothly again with this ground drive belt from Murray. Crafted with precision, it is relied upon to turn the transmission pulley, moving your tractor effortlessly across your lawn. Measuring 1/2" in width and 73 1/2" in length, it's the perfect fit for your appliance repair needs. Ensure to wear work gloves to protect your hands during installation. This spindle belt epitomizes Murray's commitment to quality and performance. Give your tractor the boost it needs with this critical component.
Murray Lawn Mower Belt
PartSelect Number PS11831567
Manufacturer Part Number 37X88MA
Genuine Murray replacement part, this item is sold individually. This is the Mower Drive Belt for the Lawn Tractors listed below. It is routed on three pulleys. Two of which drive the shafts which the mower blades connect to.
Murray Lawn Mower Belt-v-motion Drive
PartSelect Number PS11831566
Manufacturer Part Number 37X87MA
Genuine Murray replacement part, this item is sold individually. This is the belt that transmits power from the engine to the transmission giving the Tractor motion. It is put on the large pulley that is connected to the transmission, then on the top of the Stacked Pulley Assembly. It is used on all of the Lawn Tractor models shown below.
Murray Lawn Mower Belt-motion-4l 30.18
PartSelect Number PS11831556
Manufacturer Part Number 37X65MA
This is an OEM Murray part directly sourced from the manufacturer for lawn tractors. It wraps around the drive pulley and the stack pulley assembly and helps to rotate both parts. Pliers may be needed to replace this part if it becomes broken or stretched. This 30" belt is priced individually.
Murray Lawn Mower V-belt
PartSelect Number PS9014158
Manufacturer Part Number 532175436
This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The special v-belt is commonly used to link the motor pulley and the transmission's drive pulley. This v-belt is available as an individual replacement part, please see model diagram for associative parts.
Murray Lawn Mower V-belt, Drive Belt, Aramid/kevlar 89.25" El Ha
PartSelect Number PS16298804
Manufacturer Part Number 1728008SM
This is a genuine manufacturer-sourced replacement v-belt which is specially designed for use on Murray, Snapper and Simplicity lawn and garden equipment. It is the main belt which drives the unit, over time it may wear out or stretch eventually requiring a replacement. Clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. This high-quality part is made of durable rubber material and it is sold individually.
Murray Lawn Mower V-belt Ha 94.45 Lg
PartSelect Number PS8892237
Manufacturer Part Number 1732955SM
This is an authentic manufacturer sourced replacement v-belt which is specially designed for use with Murray, Snapper, and Simplicity lawn mowers. It is the main deck belt that is used to drive the blades, unfortunately, over time belts tend to wear out and stretch eventually requiring a replacement to maintain peak performance. Clean the pulleys before installing the new belt to ensure top performance and longevity with your new belt. Keep in mind this high-quality part is made of durable rubber and is sold individually.
Murray Lawn Mower Belt-secondary 47.10
PartSelect Number PS12089861
Manufacturer Part Number 37X66MA
This is a Genuine Manufacturer Approved replacement Belt used on Murray Lawn Tractors. This part is made out of Rubber and it is Sold Individually. This is the the Smaller Belt that drives Blades on your unit. Clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. You would need a Wrench set and Pliers to replace this belt. • For your safety make sure to disconnect the spark plug wire. • Fist you would need to lower the mower deck to the lowest position • Then move the blade engagement lever to the Off position. • Roll the belt off the engine pulley from between the belt guide and pulley. • Remove mower deck by removing the bow-tie pins securing the left and right lift arms • Disconnect the blade engagement cable from the mower deck • Remove the bolts from the mower deck belt pulley covers and pull the covers off. • Loosen but don't remove the nuts on the top of the idler pulleys. • Install the new mower deck belt through the belt guides and around the pulleys. • Tighten the nuts on the top of the idler pulleys. • Re-Assemble the Deck
Installation Instructions
John from OCEAN ISL BCH, NC
Changed mandrel bad bearings
Took deck out, removed blade and mandrel greased all three mandrels changed belt re installed took 30 minutes
Read more...
Related Murray Lawn Mower Parts
- Murray Lawn Mower Bags
- Murray Lawn Mower Bearings
- Murray Lawn Mower Blades
- Murray Lawn Mower Brackets and Flanges
- Murray Lawn Mower Caps and Lids
- Murray Lawn Mower Carburetors
- Murray Lawn Mower Control Cables
- Murray Lawn Mower Deflectors and Chutes
- Murray Lawn Mower Engines
- Murray Lawn Mower Exhausts
- Murray Lawn Mower Filters
- Murray Lawn Mower Grilles and Kickplates
- Murray Lawn Mower Handles
- Murray Lawn Mower Hardware
- Murray Lawn Mower Hoses and Tubes
- Murray Lawn Mower Ignitions
- Murray Lawn Mower Knobs
- Murray Lawn Mower Latches
- Murray Lawn Mower Lights and Bulbs
- Murray Lawn Mower Panels
- Murray Lawn Mower Pulleys
- Murray Lawn Mower Seals and Gaskets
- Murray Lawn Mower Seats
- Murray Lawn Mower Spindles
- Murray Lawn Mower Springs and Shock Absorbers
- Murray Lawn Mower Starters
- Murray Lawn Mower Switches
- Murray Lawn Mower Transmissions and Clutches
- Murray Lawn Mower Wheels and Rollers
- Murray Lawn Mower Wire Plugs and Connectors