All Installation Instructions for General Electric Refrigerator XSS25GGPFCBB

Coke can exploded when dropped and some got on the switch making it stick in off positionmaking thehe switch stik

Pried the switch on the bottom with a flathead screwdriver, twisted it and the switch came out far enough to take it out by hand. The bottom of the switch has to be raised upward a little because the connectors are on top of the switch. Changed the wires from the old switch to the new one, one at a time. Insert the new switch. Saved a repair call, and probably a more expensive switch. Less then 15 minutes.

Parts Used:

REFRIGERATOR DOOR LIGHT SWITCH

Kenneth from Brentwood, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

light switch was broken

replaced with new one

Parts Used:

REFRIGERATOR DOOR LIGHT SWITCH

Roman from Fort Worth, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken light switch - refrigerator side

It really was as simple as the other folks noted. Slid a screwdriver into the edge of the broken switch and it popped right out. Disconnected and reconnected each of the two wires and just slid the switch back into the slot. Truly a DIY fix.

Parts Used:

REFRIGERATOR DOOR LIGHT SWITCH

Jerry from Spring, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Refigerator light intermittent/ice build-up on evaporator

Replaced light switch. Defrost cycle remains suspect but refrigerator has worked OK for about 10 days.

Parts Used:

REFRIGERATOR DOOR LIGHT SWITCH

Roland from Rancho Palos Verdes, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Broken light switch cause lights in fridge to remain on the fridge became warm enough to brown hammer

Things fall out of my refrigerator frequently thus the broken lite switch. Thought tape would solve until new part arrived. Thank goodness part came the next day as even with tape on and door close and light bulbs removed fridge read door as open and would not cool It is programmed not to run with door open. Within 24 hours part was delivered, unbelievable . It was that fast. Easy insertion and plugged in to the wiring and my refridge once more recognized the door was shut and began cooling. Thanks again

Parts Used:

REFRIGERATOR DOOR LIGHT SWITCH

Carolyn from Pekin, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Replace Refrigerator Gasket

The customer service was outstanding. Ordered Monday and part arrive next day. I used a nongrease silicon spray on the gasket and it slipped into the slot without a problem.

Parts Used:

Fresh Food Door Gasket - Black

Robert from Santa Clarita, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Dairy door broke cause the whole door came down

I wish I could say differenet but it was very easy just a bit of pressure on on side an the dairy door snap in place.Thank you for following up

Parts Used:

DOOR DAIRY

Lourdes from Los Angeles, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Dropped a glass bowl hitting and breaking off the light switch.

Ordered the part and within three working days the part was delivered. It took two minutes to pry off the broken part and one minute to snap in the new one.

Parts Used:

REFRIGERATOR DOOR LIGHT SWITCH

Joseph from Titusville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

broken dairy door

repair went great, snap out snap in, less then 2min

Parts Used:

DOOR DAIRY

SHERRI from San Jose, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

plastic frame broke in several places

pulled out the old shelf/drawer frame and replaced with new one. Easy fix.

Parts Used:

Middle Pan Cover Frame - No Glass

Missy from Mesa, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Installing light switch on refrigerator door

It couldn't be easier. Just pry out the old broken switch with a flat blade screwdriver. start at the bottom in case you scratch the door by accident. When the bottom is out - pull the switch out slowly and disconnect the two wires that are attached to the top, taking care to remember which color lead is connected to which wire. Then, take the new switch and connect the proper wires to their respective terminals and push the switch into the slot. Done!

Parts Used:

REFRIGERATOR DOOR LIGHT SWITCH

Refrigerator Handle

Martin from Santa Clarita, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

very easy

its not the repair we live in the last town of n h and I broke the dairy door of my refrigerator in millions of peace I found your site in the middle of the afternoon order the parts and the next morning the part was there we pay for over night deleverie and it always come couple day after never never see a company like yours thank you for your site I tell every bodies about you

Parts Used:

DOOR DAIRY

lisette from west stewarstown, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

light switch broke

i followed all the other submited solutions. really easy. popped out the broken light switch with thin tip screwdriver. careful not to let wires slip into compartment. then attached wires as i pulled them off broken switch. then carefully pop the new switch back in the slot. when i was younger i worked for an appliance repair company. i felt confident in this repair.

Parts Used:

REFRIGERATOR DOOR LIGHT SWITCH

ANTHONY from WOLCOTT, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Slider broken where it attaches to the ice maker

Remove the ice bucket assy. Slider attaches with two screws in the left hand side and one thru the icemaker that attaches it to the track. Just about as easy as it gets.

Parts Used: