VBXR2070T8AB Hotpoint Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washer would not shut down in rinse cycle.
Un-plugged washer.
Removed 4 screws from top of washer panel.
Disconnected wires.
Removed plastic locking pin on control knob. Removed control knob. Removed one screw that holds timer in place.
Reversed what I did to reassemble .
Removed 4 screws from top of washer panel.
Disconnected wires.
Removed plastic locking pin on control knob. Removed control knob. Removed one screw that holds timer in place.
Reversed what I did to reassemble .
Parts Used:
-
Thomas from Crossville, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!