All Installation Instructions for Whirlpool Range RF366PXGQ2

Bottom drawer

It was easy to find the part. I ordered it on Sunday and it arrived Wednesday. A stress-free experience.

Parts Used:

Range Front Drawer Glide

Eric from Saint Michael, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

broken bottom drawer glide and missing rivet on drawer front panel

Removed the old, broken drawer glide by removing the Phillips head screw. Then placed the new glide into place and fastened with the existing screw.

The rivet on the top of the bottom drawer front was missing. I lined up the drawer front with the supporting bracket behind it and inserted the rivet. All you have to do is tap the top of the pin in the center of the rivet to lock it in place. No rivet tool is needed. That should be explained in the parts listing because I bought the rivet tool before I realized I didn't need it.

Parts Used:

Range Rear Drawer Glide

Rivet, Push (White)

David from Fairborn, OH
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

light bulb in water ice freezer door went bad

I didn't. Don't know how to get to light bulb to change it for this specific model

Parts Used:

Light Bulb - 40W

Carl from RIVERSIDE, CA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers

8 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Bad element replacement

Took off top and pulled out old element and plugged in the new one

Parts Used:

6" Surface Element, 1200 W

Thomas from Warren, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set

9 of 17 people found this instruction helpful.

Was this instruction helpful to you?

The burner would not shut off.

Pulled the dial off, unscrew two screws. Pull the switch out from the back. Disconnect the wires from the old switch and connect to the new switch one by one. Set the new switch in place. Sctew the two screws in to hold the switch in place. Push on the dial.

Parts Used:

Infinite Switch - 6 Inch

Richard from CONCORD, NH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Bake element was taking time to warm up

Wire connection was damaged, replaced end piece

Parts Used:

Oven Bake Element

Jean-Claude from Miami, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Oven Door Locked

Unplugged, took off back, removed old part, put on new part and connected. Replugged and it worked great.

Parts Used:

Door Latch

Grace from Beavercreek, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

8 of 15 people found this instruction helpful.

Was this instruction helpful to you?

The heating coil was no longer working.

My husband pulled the oven out and unscrewed the screws(in the back) the heating element came right out. He did everything on his own. The only thing he needed a little help with was for me to keep the heating coil flush to the back wall of the oven, while he screwed the new one in. It was a very quick job. The longest part was pulling the oven out to get behind it and sliding it back in.

Parts Used:

Oven Bake Element

Amanda from Midwest City, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Burner Element did not work

Shut off breaker. Remove a total of 3 screws attach wires, replace screws, turn breaker on. Done!

Parts Used:

ELMNT-SURF

Paul from Reedsburg, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

7 of 12 people found this instruction helpful.

Was this instruction helpful to you?

dropped stove forward, handle broke and trim around it also broke.

Unsrewed what was left of the trim and oven handle. Just 4 screws total, then replaced the 2 screws of the trim and the 2 screws on handle.
Finished! Replacement parts fit perfect!!! Thanks a milliion!

Parts Used:

Range Door Handle

HERLIN from BOERNE, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Loose terminal caused block to overheat and break

Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well.

Parts Used:

Range Main Power Terminal Block

Dana from Black Mountain, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

6 of 10 people found this instruction helpful.

Was this instruction helpful to you?

element went out on the stove

My wife did it! I got home one night and my wife had done it! That's how easy it was! Trust me, he is no handyman (woman) but she did it by herself. The part came fast, the price was better than any one else's

Parts Used:

Oven Bake Element

christopher from harrisburg, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

2nd 8 inch burner switch in a little over a year to not always hold selected tempurature.

As a former appliance repairman, the installation went just like the repair instruction video.
Just use care not to scratch anything and clean behind the appliance and cabinet walls, etc. It's worth a hug and a piece of pie!

Parts Used: