Models > PAS-230

PAS-230 Echo Trimmer - Overview

Models starting with PAS-230

Keep searches simple, eg. "belt" or "pump".
Air Filter – Part Number: A226001410
Air Filter
★★★★★
★★★★★
(7)
PartSelect #: PS9195232
Manufacturer #: A226001410
This part is the replacement air filter for your small engine, used for outdoor power equipment. It has a black plastic rim that is approximately 2.5 inches by 2.5 inches. The air filter in your small...
$6.49
  In Stock
Spark Plug Bpm-8Y – Part Number: 15901019830
Spark Plug Bpm-8Y
★★★★★
★★★★★
(1)
PartSelect #: PS9263506
Manufacturer #: 15901019830
This Spark Plug Bpm-8y is a silver and white OEM part. Made of steel and ceramic it is individually sold, and is an electrical part. It is installed with a spark plug socket and is rated as Easy to in...
$2.99
  In Stock
Primer – Part Number: P005003120
Primer
★★★★★
★★★★★
(3)
PartSelect #: PS11826485
Manufacturer #: P005003120
This Primer Bulb is a clear, plastic, individually sold part with an Outer Diameter of 0.720 inches (18.30 mm) and a Height of 0.674 inches (17.12 mm). With Flange: 0.842" (21.40 mm). This part is rat...
$6.03
  In Stock
Fuel Tank Vent – Part Number: A356000031
Fuel Tank Vent
★★★★★
★★★★★
(1)
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$6.99
  In Stock
Fuel Return Tube 3x6x90mm – Part Number: 13201056330
Fuel Return Tube 3x6x90mm
PartSelect #: PS8862036
Manufacturer #: 13201056330
The fuel return tube or fuel return line, as it is also known, delivers fuel back to the tank from the primer bulb. This is a genuine OEM part from the manufacturer, and it is yellow in color and sold...
$3.99
  In Stock
Washer – Part Number: 69911804560
Washer
PartSelect #: PS9066494
Manufacturer #: 69911804560
This flat washer is a black, metal, individually sold part. If the part becomes damaged due to fatigue it may appear mishapen, and should be replaced. Refer to your owners manual or check your model...
$2.99
  In Stock
Primer – Part Number: 12538108660
Primer
PartSelect #: PS9261363
Manufacturer #: 12538108660
  No Longer Available
Nut – Part Number: 43302206460
Nut
PartSelect #: PS8969875
Manufacturer #: 43302206460
This OEM Nut is a silver, metal, individually sold part. It can be installed using a wrench or socket by torquing to the manufacturer specifications. This part may become damaged over time due to fa...
$2.99
  In Stock
Bolt 6 – Part Number: 69911504660
Bolt 6
PartSelect #: PS9066073
Manufacturer #: 69911504660
$2.99
  In Stock
Flange Nut 6 – Part Number: 43301903933
Flange Nut 6
PartSelect #: PS9279274
Manufacturer #: 43301903933
$2.99
  In Stock
Trigger-Throttle – Part Number: 17801052130
Trigger-Throttle
★★★★★
★★★★★
(1)
PartSelect #: PS8901994
Manufacturer #: 17801052130
$3.99
  In Stock
Filter, Fuel – Part Number: A369000460
Filter, Fuel
★★★★★
★★★★★
(2)
PartSelect #: PS11826309
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy. The part attaches inside of the fuel tank and is used to cle...
$8.26
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
Filter, Fuel
  • Keith from NORWOOD, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaces the circular saw blade
removed the cotter pin...removed the nut holding the blade on by turning clockwise(reversed threads)....removed old blade ...placed new blade....replaced nut turning counterclockwise and tightened...placed a new cotter pin....job done
Parts Used:
8" 20mm 80 Teeth Circular Saw Brush Blade
  • Donald from DISPUTANTA, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assembly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
Parts Used:
Shield Assembly.
  • Robert from COEUR D ALENE, ID
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!