LST136B (Type 2) Black and Decker Trimmer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Renew Your String Trimmer is Easy
The plastic outer housing of my B&D trimmer steadily wore out as the lower bearing location vibrated away. But with the new part, and a separate rotating assembly, it's as good as new (and may have been OK with just the housing change).
6 or 8 Phillips screws and R&R of a stress relief inside the housing was all it took to swap out the old motor/assembly and be as good as new. No disconnection of wires, and easy repair.
6 or 8 Phillips screws and R&R of a stress relief inside the housing was all it took to swap out the old motor/assembly and be as good as new. No disconnection of wires, and easy repair.
Parts Used:
-
James from SPRINGFIELD, PA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!