All Installation Instructions for Jenn-Air Cooktop JGD8130ADS21

Fan & stove did not operate.

1st removed 2 screws & removed 2 leads ( then the fireworks started/ did not know the power was still in the leads), so removed the power. On the net picked a fan sw. from a picture & ordered it. The service was swift but the part was wrong ( had 3 contacts rather than 2/ I thought by this time they made one sw. for 2 purposes) WRONG.I called in to explain my problem & Susan M. helped me with the right part & excellant service. Thank you Susan.

Parts Used:

Fan Switch - Black

Richard from St Louis, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

vent fan cloging up

old filter fell into from removing and cleaning,
removed cover pulled out filter ,replaced it with new one.

Parts Used:

Range Grease Filter

JAMES from McALESTER, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Fan on built in Jenn-Air went out.

ordered part, called friend who does odd jobs, and he came and turned off electric, unscrewed the area, pulled out old plug, plugged in the new. Turned on electric and walla, fan works !!!! thank you very much. Part arrived in very short length of time. I was surprised.

Parts Used:

Fan Switch - Black

Katrina from Coos Bay, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Filter replacement.

Remove and replace grease filter.

Parts Used:

Range Grease Filter

Gerald from Maplefalls, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Fan stopped working.

First I removed the two screws that hold the switch in place. I then pulled the switch out about 3 inches and disconnected the three wires from the old switch and replaced the new switch....

Parts Used:

Fan Switch - Black

Gregory from Hickman, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Old grease filter had hole wore through

Pulled the old one out & inserted the new one. Less than five minutes.

Parts Used:

Range Grease Filter

Michael from Mountain Iron, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

switch too big for hole

switches had same parts numbers but were not the same size. Had to use die grinder and file to enlargh hole. took about 30 min.

Parts Used:

Fan Switch - Black

Darrell from Moultrie, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Needed to replace the grease filter!

Followed the directions. Piece of cake!!

Parts Used:

Range Grease Filter

Colette from Annapolis, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

old yucky filter

Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!

Parts Used:

Range Grease Filter

Diane from Flower Mound, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

rotten filter for down draft vent

How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!

Parts Used:

Range Grease Filter

Craig from Ashburn, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

terminal spade wrong size on range wiring to fit module

cut off terminals and replaced with the right size one's stove lights every time now wlrowe

Parts Used:

Spark Module - Oven

wilber from oshkosh, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

2 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Intermittent but rare spark when I went to start the rage: spark module definitely was toast or on its way out

The trickiest part was locating the elusive spark module. I am not certain I took the best route, but not considering all the wrong routes in trial and error, it was the most expedient. Certainly there must have been a single something to remove to get to this frequently faulted part..

Anyhow, thanks to the great part, the stove works really well again.

Parts Used:

Spark Module - Oven

Bronius from College Station, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Fan Switch burned out on Jenn-Air stovetop

The original fan switch for down draft stove top was discontinued! I found a replacement switch which worked just fine! I received switch and 2 different type replacement plates! One an exact match! Switch different but worked fine! I had to make no modification! Changed I'm about 10 minutes! I was lucky from what I read on other customers' responses!! They wouldn't promise me it would work!!

Parts Used:

Fan Switch - Black