Models > HBL5651UC > Instructions

HBL5651UC (03) Bosch Wall Oven - Instructions

All Instructions for the HBL5651UC
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Need to replace bake element
First, cut the power and remove the oven from the cabinet.

The bake element is accessible from the back and sits in a drawer.

As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.

Make a note of what wire goes to the right and to the left so you can plug them back like it was before.

When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.

To close the cover that you bent, you will need a helper and push really hard.
Parts Used:
Bake Element
  • Ludovic from MIAMI BEACH, FL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven was not heating properly
Took the one out of the box and take off the back plate and detach the sensor
Parts Used:
SENSOR
  • Barry from MONROE, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken glass/door won't stay closed
installed new front glass panel.
installed thin magnetic catches on each side of door
Parts Used:
DOOR-OUTER
  • Michael from DES MOINES, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the HBL5651UC
1 - 3 of 3