The tub dampening straps support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If your washer shakes and moves, or is making a loud banging noise during the wash c...
This set (Knob and Clip Assembly, Control Knob, Dryer Control Knob) allows you to replace the knob on your timer if it is damaged or missing. The plastic knob can break around its shaft, or the retain...
This is a replacement timer knob for your washing machine. To complete this repair you will need a pair of needle nose pliers. Turn off power to the washer before you start. Pull off the timer knob an...
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the ti...
The drain hose is black in color and made of flexible material. This is a part for your top-load washer. The hose measures 57 inches long. This part moves the water out of the washer and into the drai...
This is a dual-action agitator for a washer. It is an OEM replacement part that is sourced from the manufacturer. The agitator tosses your clothes to clean them efficiently. This plastic dual-action a...
This timer dial with compression ring shows you which part of the cycle your washer is in. It is white in color and can be found mounted on the timer shaft. You may need to replace this part if your ...
The main tub seal is located between the transmission and the outer tub. Its the primary water seal in the outer tub for the transmission-shaft. If your washer is leaking during the fill cycle, or at ...
This is a tub bearing and it is meant to work in conjunction with your washing machine. The purpose of this part is to aid in keeping the inner tub of your washing machine spinning smoothly during a w...
This split ring is supplied by the original equipment manufacturer, and it is designed to secure the tub bearing in washing machines. It is a circular metal ring, with an outer diameter of 2 inches. T...
This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you...
$27.53
In Stock
Questions And Answers for GTWN2800D2WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elmer
February 16, 2020
Had to turn temp control to cold to get hot water. Replaced water inlet valve ,now, only getting warm water, no hot or cold (it is a cold rinse only machine) replaced temperature control switch,still warm water only
For model number GTWN2800D2WW
Hello, Thank you for your question. I would recommend testing the inlet valve to ensure it has not failed again. It is also recommended to check the hoses and ensure all are working properly. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
June 25, 2022
How do I fix the spin cycle
For model number GTWN2800D2WW
Hello Paul, thank you for your question. If your spin cycle is not functioning properly, it may be the Belt PS1482278 that is stretched or damaged. Or, the washing machine won't go into a spin cycle until it's been drained. The Drain Hose PS890597 may become clogged with debris from your clothing, or it could be kinked
My washing machine fills up with water and begins to wash but begins to spin before the wash is complete. Then the spin comes to a complete stop before the spin cycle is finished and locks. What do you think could be the problem.
For model number GTWN2800D2WW
Hello Stacy, thank you for your question. The most probable cause of the issue you describe is a problematic washer timer, part number PS11701146. It controls the electrical components and the duration of the washer's cycles. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
This washer provides only lukewarm water - NO HOT - manufactured intentionally that way for energy purposes. Told to disconnect wire that feeds the mixing valve, I would then get only HOT [instead of luke warm water] but now the hot water become an extremely slow stream and takes forever to obtain enough water to do small load of wash
Would like to change the water switch/valve to correct. Can you help??
Thank you
For model number GTWN2800D2WW
Hello Eleanor, thank you for your inquiry. Clean the water inlet screens. Check the hot water line coming into the washer. If this is not the issue, you will need to replace the water inlet valve, part number PS11701139. We hope this helps, good luck with the repair!
I get limited hot water only if I turn the cold off. Hose and screen is clear. Temp switch allows cold, lukewarm and lukewarm. Do you think this part would solve the problem?
For model number GTWN2800D2WW
Hello Greg, thank you for getting in touch. According to our understanding, the issue is most probably with the temperature control switch, part number PS3499718. It regulates the temperature of the water entering the tub. You may need to replace it to solve the problem. Glad to be of assistance!
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed.
After removing frt panel which prys off I checked for anything obvious like a loose belt. Then I jiggled the magnet switch located on the inside of the loading cover. I saw the machine start agitating the it stopped again when I stopped touching it. I ordered the new part and spliced it in with the wire crip tool. Now the machine is A ok.