All Installation Instructions for General Electric Dryer GTDX185GD4CC

bad timer fixed now

part took 10 days to come not part select fault took 3 days from st paul to new jersey went to woodbridge nj 2days to keasby nj another 2 days to edsion nj 2 days to staten island1 day took about 15 min to install dryer works fine now thanks part select

Parts Used:

Timer

willie from STATEN ISLAND, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

My last phase of repairs of minor items.

if your unit has over 6,000 hours of operations, one needs to remove the front panel and inspect the sliders that the drum rides on. The video were very helpful to replace the sliders. Unfortunately, my dryer had over 10,000 hours of operations over a 30 years period, hence a major repair costing over $200.00 dollars. The drum sliders were gone, hence the drum eat through the plastic guides. More so, the drum started to eat away the front panel. If the dryer is eating your closes and making a noise, one is looking at a $200.00 repair job. Hence check the sliders early will save one $$$$.

Parts Used:

Dryer Lint Chute Assembly

Edward from EDGEWATER, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

broken dryer door handle

removed remaining handle pieces and simply snapped the new part in place. very simple,very easy.

Parts Used:

Door Handle - White

Danny from DOVER, AR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Bulb

Open dryer door, reach in at the 12 o'clock postion
on the inside is the bulb.

Parts Used:

Light Bulb

Mark from Monroe Township, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

The door handle was comming off had broken hook

I pulled the old handle off and pushed the new one on.
No problem at all.

Parts Used:

Door Handle - White

John C. from Cincinnati, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

light bulb dead

remove the old one and put the new one...!!! Easy

Parts Used:

Light Bulb

Carole from Wynnewood, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

No power to dishwasher

Replace both micro switches.

Parts Used:

Interlock Switch

Robert from OLD TOWN, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

door filter

was no repair- removed filter from door and installed new filter into door. No tools required.

Parts Used:

Lint Filter - White Frame

victor from ST AUGUSTINE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

no handle

just replaced the unit handle and how my wife can open the dryer without a screwdriver

Parts Used:

Door Handle - White

syd from wilmington, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Bad dryer motor

Replaced dryer motor which was a perfect fit thanks to your help. The process was helped by the internet videos available for the step by step procedure of taking the dryer apart and replacing the bad motor. I also was able to completely clean the inside of the dryer thoroughly, and reassemble it back together .

Parts Used:

Drive Motor and Pulley

Darryl from FARR WEST, UT
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)

1 person found this instruction helpful.

Was this instruction helpful to you?

Cracked air duct

Two screws under the dryer door then the top comes off.Then two screws hold the front on come out. 4 screws top is off and front is off the rest is no problem.

Parts Used:

Dryer Lint Chute Assembly

Forrest from Mays Landing, NJ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Black marks showing up on garments.

Once I figured out how to remove the control panel. The rest was very easy. Upon pulling off the knob in the center of the control panel, there was a screw behind it. Once removed I used the palm of my hand and gave it a couple of upward hits in the center while the door was open. It slid up and I removed the electrical connections. Then carefully removed the top by pushing from the rear of the machine slightly and lifted off. Then removing the screws that hold the front on . After that it went pretty easily, reassembly went in reverse and. That was that!

Parts Used: