All Installation Instructions for General Electric Dishwasher GDF510PSJ0SS

The soap dispenser was not opening during the washing cycle

Took off the door and separated the two door pieces. Unscrewed the old dispenser and replaced it with the new one.

Parts Used:

DETERGENT MODULE

Stephanie from Huntsville, AL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Door gasket needed to be replaced

Simple answer- do not try to do this. GE makes you replace the entire door to replace this $3 part or call them and pay $100s to fix it. We decided to replace the entire dishwasher after we went through disassembly (there are no instructions on this) only to find out we could not fix without a brand new door.

Parts Used:

Gasket

Corinna from MOUNT AIRY, MD
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

No boost in water temperature; water temperature during wash cycle not hot enough; dishes not drying

Had to trouble shoot to isolated the true fault condition. Checked heating element was good
Researched symptoms on YouTube
Removed and inspected float switch part
Ordered and replaced part.

Parts Used:

Flood Switch

David from CARY, NC
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

would not drain water

2 hose clamps, connect the wire with the wire adaptor suppled

Parts Used:

Single Speed Drain Pump Kit

Ed from Cassopolis, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

roller wheel was melted.

I removed the old roller wheels and the new roller wheels snapped together and the simple instructions made the repair quick and simple..

Parts Used:

RACK CARRIER AND ROLLER KIT

Julian T from Dalton, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

dishes were not dry at end of completed wash cycle

Followed the instructions on the video, it was pretty straight forward. It was helpful to know what to expect before hand like removing accumulated water in the drain before removing the flood switch so as not to have that water drain under the dishwasher. Knowing to have a nut driver with magnetic tip was helpful in removing and reinserting the screws. all in all it was pretty easy repair.

Parts Used:

Flood Switch

louis from FRANKFORD, DE
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The soap dispenser was broken os to save money I ordered one on-line

The repair instructions were great and the repair went well. The repair took less than an hour.

Thank you
Gary

Parts Used:

DETERGENT MODULE

GARY from SOAP LAKE, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Dishwasher was not drying

I followed the U tube instructions already put out part select.

Parts Used:

HEATING ELEMENT

Larry from STERLING, CO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

washer would nt ru it beeped 3x and flash start lite

Looked upm the problem it said door wasn.t closed so cause was the door latch. put in the new one no change so I bought a new dishwasher

Parts Used:

Door Latch

Robert from ST AUGUSTINE, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Upper rack rusted out

Took out the old and swapped out the parts from the old one and put them on the new rack. Looks great and works great.

Parts Used:

UPPER RACK

James from OMAHA, NE
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Ge Dishwasher was not filling with water

I replaced the Flood Switch Part Number: WD21X10519.
I found that be removing the bottom front cover under dishwasher door, there was a small black plastic clamp holding up the wiring cable. By disconnecting the clamp, it gave me a few more inching of wire inside the machine, which made disconnecting old flood switch easier. It also help in installing the new flood switch. Then finally i reinstall the clamp cable under the machine to finish the job.

Parts Used:

Flood Switch

Robert from DANBURY, CT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Original lower rack rusted

Pulled out old rack and replaced with new rack.

Parts Used:

Lower Rack And Swb Replacement Kit

ANNE from LAKE PLACID, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Racks were rusted.

Ordered new parts, unpacked the shipping containers, removed old racks and inserted the new ones. piece of cake. Perfect fit and prompt service.

Parts Used:

UPPER RACK

Lower Rack And Swb Replacement Kit

Charles from MYRTLE BEACH, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

All 3 spray arms were stoped up.

Replaced all 3 spray arms in less than 10 minutes.The top one came in two pieces,the mounting bracket and the arm.Snap the bracket on the dishwasher first , then attach the arm to the bracket.

Parts Used: