This part is a replacement gasket for your dishwasher. The gasket creates a seal at the bottom of the dishwasher tub, so water does not leak out while the dishwasher is running. If you notice water leaking out onto the floor, you should inspect the gasket for damages and replace as necessary. The gasket is gray in color and is approximately 22 inches long. It is made of plastic and is sold individually. This is a genuine OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
Part# WD08X21894 replaces these:
AP5980286, WD08X10090
Customer Reviews
Average Rating:
★★★★★
★★★★★
31 Reviews
4.6
Filter By Rating:
5 Stars
25
4 Stars
2
3 Stars
1
2 Stars
3
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard M - December 12, 2024
Verified Purchase
Repair
Tought getting out door, but installing was easy, except water still leaks. Need to check if I installed it right or maybe it is defected or maybe my door is bad.
★★★★★
★★★★★
Chris D - December 11, 2024
Verified Purchase
Simple replacement.
Simple replacement. Several videos on line to see how it is done. Super easy.
★★★★★
★★★★★
Carl L - December 5, 2024
Verified Purchase
part was listed and looked like original in owners manual
came on time and works well shipping was a bit expensive only
★★★★★
★★★★★
Doris M - August 16, 2024
Verified Purchase
Fast service and part fit
The part came fast and was fairly easy to install. I just followed someone else’s helpful instructions. The hardest part was rounding up the right tools because I am not a mechanic. ??
★★★★★
★★★★★
JORGE L - May 15, 2024
Verified Purchase
Perfect fit
Fit perfectly. Removing the dishwasher door was a little tough since i'm a beginner but working with a partner is a plus.
★★★★★
★★★★★
Jonathan T - March 28, 2024
Verified Purchase
Love partselect
I have used this website a few times love it no problems and I have no complaints all I can say is awesome
★★★★★
★★★★★
Peter L - September 11, 2023
Verified Purchase
Perfect fit
This part was just the right thing!
★★★★★
★★★★★
Frank H H - May 24, 2023
Verified Purchase
Easy repair
Fit was assume
★★★★★
★★★★★
John M S - June 29, 2021
Verified Purchase
Haven't used yet
Haven't used yet
★★★★★
★★★★★
Daniel R - December 18, 2020
Verified Purchase
Exactly what was needed.
Perfect fit.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 19 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
old gasket deteriorated, needing replaced
Unscrewed brackets on top of dishwasher from underside of counter. Removed dress plate at bottom of dishwasher. Pulled dishwasher out of opening to access door hinge. Disconnected pulley cable/rope from each side door hinge. Let go slowly. There is a 1/4 bolt holding the door tight to the hinge. With door closed (still) the screw is
... Read more on bottom of bottom edge. Use wrench to loosen and remove. Once both bolts are out, open door. Pull door away from dishwasher just enough (1-3 inches) to slide out old gasket. Prior to removing take note of existing gasket orientation and installation. Slide old gasket out one side and slide new gasket in. Push in door tight to hinges,close door, use wrench to put bolts back in. Reattach pulley cable/rope to each side. Push back into opening. Reattach to counter. Put dress plate on bottom back. Return dishwasher to regular use.
Read less
Brad from HIAWATHA, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element broke off and burned a hole in rubber tube, leaking water.
Replaced the dishwasher with a new one! used the same brand (GE) but different model to make the job a little easier, first cut power to the outlet, disconnected electrically from dishwasher, cut off water source from dishwasher, and disconnected hose from garbage disposal, removed old dishwasher put new one in, connected electrical wires
... Read more (color coded), connected water supply with pliers, and connect your hose to your disposal and level your new disposal with leveling screws that comes with the new dishwasher. Put front cover plate on with screws provided with a screwdriver and that's it.
Read less
Mario from CHESAPEAKE, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old corroded gasket
Replaced gasket with a new one before further problems occurred. Got to get it in but it was relatively easy to place and snap in just make sure it fits on the right place where gasket inside meets ridges on door so it will be on properly for proper fit.
Gregory from EXPORT, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking under door
Since I have granite countertops, unscrewed 2 screws on each side of cabinet. Unscrewed the toe plate, unplugged the wire connector, and disconnected the cable from the door which was held by tie wraps. Pulled out dishwasher about a foot. Unhooked the spring cable to the door, lifted the door out and placed it on a spare table. Wit
... Read moreh door face down on a towel, I unscrewed the screws at the bottom to release the latches, then unscrew the screws that hold the door locked in place. Turned the door on its back face up, wedged a flathead driver to release the settings display, from the body of the door. Separated the 2 panels replaced the foam rubber vent seal. Placed the face face down, reconnected both pieces of the door together pushing down. Rescrewed the bottom to lock the 2 pieces together reinsert the hinges, screwed them in with nutdriver1/4". Grabbed the old gasket, replaced it with new one, sliding it into the groove on the bottom inside of door. Reattached the door to the washer, rehooked the cables to the door, retired with zip ties the cable to the underside of door, reinstalled the wire connector, and re screwed the toe plate. Pushed the dishwasher, leveled, rescrewed into cabinet. Replaced the tub gasket.
Don't remove the door! Unscrew the bolts at each lower corner of the door(this is how the door is attached to the hinges so it is now free). Then open the door fully and slowly pull the door toward you a few inches. This slides the door up the hinges and allows just enough room to slide the old gasket out and and slide the new one in.
... Read more Then slide the door back down the hinges(pushing it away from you, back into place). Then simply close the door and reinstall the bolts at the bottom corners and all done! I watched several videos and believe me, removing the door to replace this gasket does nothing but turn and small quick repair into a large lengthy one.
Read less
Brad from FORT THOMAS, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lower door gasket deteriorated/moldy
The dishwasher had been installed before we added 3/4 oak floor, so I could not pull the dishwasher out from under the counter. That will be a major project when the dishwasher dies. To remove the door, I removed the two 1/4 " screws on the right and left bottom of the door. I used a box wrench since that was the only way to reach t
... Read morehem. One had corroded due to a leak. it took some coaxing but finally came loose. The hint about opening the door 27 degrees and propping it open with two Allan wrenches through the hinge holes was very helpful. Then I lifted the door a little and gently pushed toward the counter releasing the door form the hinges. I took the door off to find a leak and found the right corner edge of the inside tub had cracked. Not sure how this happened. I cleaned and sanded the crack area and used J-B Weld to epoxy the crack. Replacing the gasket was easy. Slide out the old, slide in the new. Everything went back together smoothly. If I hadn't needed to repair the tub, the hint about opening the door all the way and sliding it out part way might have worked to change the gasket. Note. Unlike a stove door the dishwasher door is not that heavy.
Read less
Stephen from MATTAPOISETT, MA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Wrench set
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking at the bottom of the door (left side)
I removed the old gasket and installed the new one in the same position as the one I removed. I had to feel with my fingers for the ridge to insert the gasket so that it would hold. I must admit that I was skeptical that it would work (the old one didn't even seem very damaged). I ran a cycle and there was no more leaking. We've been
... Read moreusing the dishwasher ever since with no issues of leakage.
Very satisfied customer.
Read less
Aaron from CLARKSTON, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leak at front of DW
Release DW from cabinet and pull out, Unplug power. Remove kick plate and unplug door cable. Open door about 6 inches and using socket back out 2 bolts at bottom of door corners. Pull door up off hinges about 4 inches and slide old gasket out and install new gasket in place. Reset door on hinges and reinstall bolts.
... Read more />Plug door cable in and reattach kick plate and plug power cable in. Push DW back in place and attach to cabinet and adjust kick plate
Read less
WILLIAM from Venice, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom door seal broken and leaking
Unplug power to the dish washer. Remove 2 kick plate screws to remove kick plate Remove 2 screws that hold DW to underside of countertop Slide out dishwasher enough to access the cables on each side at bottom of door. With door closed, use plyers to lift the cable (one on each side) off the retaining stub. Unplug
... Read moredoor wiring connector. Open door and slide door off the hinges. Slide old seal out and insert new seal.
Reverse to reassemble
Read less
Steven from OXNARD, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher Leaking at bottom when running
To remove/install gasket one has to remove a Door Hinge Arm on one side. Then you can easy remove old gasket and replace. Please follow these steps when removing a hinge: https://www.youtube.com/watch?v=hTpe1dedyr8
Mark from BURKE, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
23 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dolores
November 24, 2017
How do I replace the gasket at the bottom of the door? It completely disintegrated.There are no screws anywhere in the door assembly to take the front off or loosen the inside, and it's all made from plastic.I may have the incorrect gasket, but I know how to order the correct one.Thank you for your help.
For model number GDF520PGD1WW
Hi Dolores, Thank you for the question.Here are some installation steps.First removed the 2 screws at the bottom of the door. Open the door all the way and pulled the door back on the hinges until you can pull out the bottom gasket.Slide the new gasket back in place and pushed the door back down on hinges and replace the 2 screws. Good luck with the repair!
35 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
January 25, 2018
How do you put this gasket on?
Hello Mark,
Thanks for your question. Remove the screws at the bottom of the door, then slide it back along the hinges until you can access the bottom gasket. Remove the gasket, then set the new one in place and reposition the door accordingly, then reapply the screws.
I hope this helps.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Lynn
February 3, 2018
Where does this part go? On the inside or outside? My fall off and i don't know where it came off at? There were no screws with it. Are there instructions or youtube videos. I know its the right part it matches the one that fell off.
For model number 845
Hello Lynn, Thank you for your inquiry. This goes on the bottom of the inside of the door. Remove the screws at the bottom of the door, then slide it back along the hinges until you can access the bottom gasket. Remove the gasket, then set the new one in place and reposition the door accordingly, then reapply the screws. Although we do not have a video for this exact part number, I have included a link to a video for a similar part to assist you. Hope this helps!
https://www.youtube.com/watch?v=7NfdyJp1zKA&index=3&list=PLD984081941E1E8CD
6 people found this helpful.
Was this helpful?
Thank you for voting!
Brandon
September 28, 2017
Can you please tell me how to replace the bottom door gasket? I can't figure out how to do it. The part number for the bottom door gasket i am looking to replace is GE wd08x21894. I do not know how to take the door panel off or how to get the current gasket out. Thank you in advance.
For model number GDF520PGD2WW
Hi Brandon,
Thank you for your inquiry. There is a video on our website that you may reference on how to install the bottom door gasket. You may find it under part number PS2337852. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
December 7, 2019
How do you replace bottom gasket have part wdo8x21894. Doesn't seem to fit. No screws on door . Do i have to take door off hinges? Advice please.
For model number GDF510PSDOSS
Hello Joe and thanks for writing.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair
https://www.youtube.com/watch?v=cmu5jljVDdU
3 people found this helpful.
Was this helpful?
Thank you for voting!
Don
February 7, 2019
Hi:I replaced the bottom gasket on my GE dishwasher even though it was still in good shape as it's under 2 years old. It is still dripping on the left side, front, in the corner. Can't figure out where it's coming from. Anyone have any suggestions? Should i replace the tub gasket as well? Anything else? Thanks for responding.
For model number GDF510-620 series
Hello Don, thank you for your question. Yes, if the door gasket was replaced we would recommend replacing the tub gasket next. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Donna Brown
March 29, 2019
My dishwasher started leaking from the bottom. I suspect its leaking from the bottom of door. I called GE to see if there is a gasket for the bottom of the door, and there is, i am not sure how to remove or install the gasket. There are no visible screws so i think i have to lift the door and unhinge then pull out.. maybe then i can see where the gasket is..then remove old one and replace with new one. please advise
For model number Gdf520PS0SS
Hi Donna,
Thank you for your question. For this model there should be screws that you will need to remove. Remove the screws at the bottom of the door, then slide it back along the hinges until you can access the bottom gasket. Remove the gasket, then set the new one in place and reposition the door accordingly, then reapply the screws. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jill
July 2, 2019
Is there insulation that should have come with this dishwasher? It’s brand new and there’s a gap between the outside of the dishwasher and enclosure. —jw
For model number GDF510PSM0SS
Hi Jill,
Thank you for your question. If the gap is at the bottom of the door, you will need to install a gasket if it is not already there. The part number listed under your model number for the gasket is PS11700870. The gasket creates a seal at the bottom of the dishwasher tub, so water does not leak out while the dishwasher is running. If you notice water leaking out onto the floor, you should inspect the gasket for damages and replace as necessary. The gasket is gray in color and is approximately 22 inches long. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
September 23, 2019
I need to replace the lower door seal but there are no screws to remove to access the seal.
For model number GDF520PGD4WW
Hi Bob, thank you for your question. There are screws all around the inner panel of your door that you would have to remove. Generally you can just remove a few of them from the bottom half to get enough wiggle room to replace the gasket, however you can also remove all of the screws to remove the entire inner panel. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Anne
February 7, 2019
Do you have any repair videos available? I haven't been able to find any on on youtube for this particular model. I'm trying to replace the gasket along the bottom of the door.Also, if the leakage that is coming from the center of the door isn't related to the gasket, but to a drainage issue, any ideas of what i might need to check? i have cleaned the filter, but that didn't work.
For model number GDF520PSDOSS
Hello Anne, thank you for your question. Unfortunately, we do not have an installation video for this part. Another customer provided these instructions though. Maybe they will help. First removed the 2 screws at the bottom of the door. Open the door all the way and pulled the door back on the hinges until you can pull out the bottom gasket.Slide the new gasket back in place and pushed the door back down on hinges and replace the 2 screws. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Dishwasher-Seals-and-Gaskets.htm"},{"position":3,"name":"WD08X21894","title":"WD08X21894","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
