All Installation Instructions for Frigidaire Refrigerator FFTR1820SW3A

Broken crisper pan cover.

Put crisper cover in place and positioned glass cover.

Parts Used:

Refrigerator Crisper Drawer Cover

Kenneth from OCALA, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Door sagging, creating a gap to let in condensation

You tube is my best friend for DIY repair. I supported the door with wood blocks, removed the bottom bracket and was able to slide the refrigerator door down and out without removing the freezer door. Replaced both hinge bearings and door stop and washer on bottom hinge and slid the door back into place. Door is very light when empty. Fast and easy, door opens and closes smoothly and no problem with condensation anymore.

Parts Used:

STOP-DOOR

Hinge Bearing

Single Washer

amy from SOMERVILLE, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Accidently dropped the crisper drawer and it broke on the left front corner.

We received the crisper drawer in magnificent time and unpacked it and washed it and dryed it, and just slid it into the refrigerator. Thank you for your very prompt service.!!!!!!!

Parts Used:

Refrigerator Crisper Pan

Carol from ROCKVILLE, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Had no freezer shelf.

I had to cut a little of of the ends of the shelf to make it fit. I used an angle grinder to get the job done and the shelf fits perfectly. By the way I paid for 3-5 day shipping and got it the very next day can't ask for better service than that.

Parts Used:

Freezer Shelf

Bettie from Toledo, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

The meat drawer slide had broken and the drawer would fall down everytime you opened it.

Pulled the drawer out, lifted the shelf out of the refrigerator, unscrewed drawer slides from shelf and rescrewed the new drawer slides and returned the shelf, drawer, and the job was finished. Thank you so very much for your speedy delivery.

Parts Used:

Drawer Support Rail - Right Side

Drawer Support Rail - Left Side

kathleen from cypress, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Freezer came with no shelf

The shelf fit perfectly right out of the box. It was as if it was made for it. No tools needed except for the box cutter to open the shipping carton.

Parts Used:

Freezer Shelf

Henry from South Lyon, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

drawer support rail was broken

Took one screw out to remove the old rail off by removing one screw placed the new one into the slot and replaced the screw and put the drawer back into the refrigerator

Parts Used:

Drawer Support Rail - Right Side

Earl from Peoria, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

lunchmeat drawer support rail broke

husband did it in less than 3 minutes. took top shelf out with part attached. one little screw to remove broke piece and one screw to install replacement part, good as new. took longer to clean the shelf before replacing it back in fridge.

Parts Used:

Drawer Support Rail - Right Side

Stacy from Chisholm, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Lost parts

screwed the center hinge and spacer on the refrigerator then installed the center pin on the hinge and bottom door placed the top door on the pin and then screwedthe top hinge to the refrigerator,like new

Parts Used:

Center Hinge Pin

Center Hinge Bracket

Nasser from Paterson, NJ
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

The original part was plastic/and broke

unscrewed to little bolts and installed the new/metal part we got rfom partselect.If we may say.this is a great company to buy from! Fast!

Parts Used:

Upper Hinge

John from Lancaster, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Right drawer rail broke/ don't need left

Screwdriver

Parts Used:

Drawer Support Rail - Left Side

Edward from FREEPORT, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Fridge was cooling down enough the heating defrost was bad

I take 2 crew on front of the fridge take the cover and fan out replaced the part and put everything back it’s a easy job thanks guys for the parts from Orlando fl

Parts Used:

Defrost Heater

José from ORLANDO, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Repaired Oven Range Light Bulb

The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.

Parts Used: