Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
February 12, 2018
How is left and right defined for the drawer slides. Is it based on me standing in front of the unit looking at the drawer? So my left hand would touch the left slide and right would touch the right slide??
For model number FRT17G4BW1
Hi Scott, Thank you for the great question.You are correct, It is when you are standing in front of the appliance facing it, it would be your left or right side. Hope this helps!
52 people found this helpful.
Was this helpful?
Thank you for voting!
Melony
April 23, 2019
How do i know which is the left or right side? I'm trying to replace the crisper drawer glide that broke off and i don't know if i need the left side or the right side. When i am facing the refrigerator. The piece that is broken is on my left side.
For model number FFTR1821QW5A
Hello Melony, Thank you for the great question. It will be your left or right as you stand in front of the appliance facing it. Hope this helps!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Tina
November 12, 2017
The right rail of the meat or deli drawer broke. The part #ps430917 you are showing in the picture is not the same one for my model. The screw should be on the back not the side. Do you have this part? Please let me know. Model# frt17g4bw1 serial # ba32632368 - manufactured 06/03. Thank you.
For model number FRT17G4BW1
Hi Tina, Thank you for the question, The PartSelect Number PS430916 is the correct rail that supports the left side of the Meat Pan. This rails does screw in from the back. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ora
January 23, 2019
The support for the meat drawer is made onto my frame is this correct and do they have the part with the frame
For model number 253.68892010
Hello Ora, Thank you for the question. The Rail supports are not built into the frame. They are separate and are also sold separate from the frame, Part Number: PS430308. Thank you for your inquiry, good luck with this repair!
I have a Kenmore model 253.73754304 and need tempered glass for the shelf and the middle rail to hold the sliding pan. It does not show me the glass size and also the middle rail. Can you help me with that?
Hello Mansour, thank you for inquiring. The shelf with the center rail to hold the two Crisper Pans is at the bottom. That rail is built into the Crisper Pan Cover part number PS2363600 for your model. The Crisper Glass Shelf Insert for it is part number PS429963. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lawrence
August 26, 2019
Part 42 drawer support is the same part number, they are not the same they are oppisites
For model number FFHT1817PS1
Hi Lawrence, thank you for your question. If you look at the parts list for your model there are two part 42's listed if you scroll down. The right and left side. I have linked the right side below for you. Good luck with your repair.
Does the drawer support rails come with the plastic clips on the front that attach to the shelf? The plastic clips are really all I need. Can I buy just those? Thank you
For model number FFTR2021TB2
Hello Jim, Thank you for the question. The Plastic Clips are included with the Rail and are not sold separately. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Henny
August 13, 2021
My drawer is on the hinch side of the fridge. Which slider do i order, it broke in the middle of the fridge
For model number FTHD18P4KW4
Hello Henny, Thank you for writing. Based on the model FTHD18P4KW4 and you indicate it has broken in the middle of the fridge, we recommend Drawer Support Rail - Right Side PartSelect Number PS430917. If you needed the rail, with the the door opened, closest to the Left is PartSelect Number PS430916. We hope this helps.
pan-crisper pan was easy because is just slide in. the drawer support rail just took a screwdriver to unscrew the screw and replace it with new rail and put the screw back in. The thing I like the best is the fast service of the parts to me.
overloaded the meat tray with a 3 lb package of cheese slices the right side rail broke
removed the screws in the piece of the rail that was still attached and replace with new one - hardest part was the screw it was so little I started it without the magnetic screw driver - it took about 20 minutes
I unscrewed the old rails and took the number to order on the first day. The order came on the 3rd day. Can you imagine such fast service. My daughter is a single mom with 4 children, one of whom was responsible for the breakage. I am the grandmother and was very grateful for the fast service and great price. The drawer was installed in 10 minutes. I just screwed the old screw into the new part and replaced the drawer. Thanks
Took out the broken piece, replaced it with the new support using only a screwdriver, and VOILA, it was finished. Thanks!
Sue from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the drawer support rail broke
it was very simple, my husband did it. had to take the top shelf out and screw in the support rail and that was it. couldn't have been any easier. this was the easiest process from start to finish that we ever had. looked up on line, found your website, ordered the part and it arrived in a couple of days. So easy and your company was most efficient in having the part and in processing. Couldn't have been mored pleased.
Tara from Winsted, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic support rail broke
removed the top shelve. Unscrewed the broken support rail and replaced it with the new one.Put the shelve back and I was done
Joanne from BOURG, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left side rail support snapped off the lunchmeat drawer
Used a small screwdriver to disconnect the left side rail from and replaced with the new left side rail. Everything went smooth and from start to finish, replaced the piece in about 3 minutes. Works great now!
Most of my time was spent removing food items from the shelf that supported the rails. Once that was done, a quick removal of the screw, replace the left support rail and re-installing the screw. Done. I wish all of my repairs were so easy!
Frank from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The meat drawer slide had broken and the drawer would fall down everytime you opened it.
Pulled the drawer out, lifted the shelf out of the refrigerator, unscrewed drawer slides from shelf and rescrewed the new drawer slides and returned the shelf, drawer, and the job was finished. Thank you so very much for your speedy delivery.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Maria M - May 2, 2022
Verified Purchase
Easy to install
Thanking partselect for making it simple to purchase appliance parts online. The part comes quick and it fits perfect.
★★★★★
★★★★★
Ruth M - September 15, 2021
Verified Purchase
Crisp drawer, Drawer support rail.
You sent me the wrong side. I needed the Right side. Oops...
I still need Right side rail.
The drawer fit great.
I need a return label and postage paid please and thank you.
★★★★★
★★★★★
Attn: Al Moander H - September 8, 2021
Verified Purchase
Amazed!
With the thousands of items that could have been shipped to me, I was amazed when the part I received was the exact piece I needed.
Thank you!
★★★★★
★★★★★
Donna A - August 31, 2021
Verified Purchase
Quick and easy
Took all of 5 minutes to replace broken rail with new one.
★★★★★
★★★★★
Kari M - August 21, 2021
Verified Purchase
Easy repair.
Part arrived swiftly and the fix was easy. Thanks
★★★★★
★★★★★
Timothy M - August 19, 2021
Verified Purchase
Easy repair
Fast shipping
★★★★★
★★★★★
Courtney M - August 19, 2021
Verified Purchase
Easy repair
The part came quickly and was ready for install.
★★★★★
★★★★★
Raymond T - August 12, 2021
Verified Purchase
Repair
No problems
★★★★★
★★★★★
Dora A - August 11, 2021
Verified Purchase
Easy repair-worked as expected!
The part was in perfect condition and shipping on time. It took 5 minutes to change out, quick and easy. Im glad I found PartSelect!
This manufacturer-certified drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or closing your fresh ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS430916
Manufacturer Part Number: 240530601
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
