All Installation Instructions for Frigidaire Refrigerator FFHT2021TW1

Light Socket short

- Unsnapped old light socket from top of Frig
- Disconnected elect wires
- Reconnected elect wires to new light socket
- Snapped new socket in place
- Done in less than 2 min.

Parts Used:

Light Socket

Rebecca from Gautier, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

22 of 31 people found this instruction helpful.

Was this instruction helpful to you?

cracked bottom hinge

My 4 year old grandson used the frig door as a swing.The bottom hinge cracked, then the door wouldn't seal. I propped the door up with some books, removed the broken hinge (2 bolts) and replaced with the new part. Simple fix on the door, only time will fix the 4 year old!

Parts Used:

Lower Hinge Bracket

LEE from LEO, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

16 of 21 people found this instruction helpful.

Was this instruction helpful to you?

Shattered crisper pan glass

I slid the new glass in place

Parts Used:

Pan Cover Glass Insert

Stacia from Salem, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

16 of 21 people found this instruction helpful.

Was this instruction helpful to you?

rack door broke in half

Rack door slid into place easily. Repair required no tools and took maybe 20 seconds to install!
Very easy job!

Parts Used:

Door Shelf Retainer Bar

Lisa from Milwaukee, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

15 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Broken meat tray support rail

Pull out the shelf and remove the one screw that holds the support rail in place. Remove broken rail, slip in the new one, then replace the screw. Done!

It takes longer to remove items from shelf and clean it than it does to replace the part.

Parts Used:

Drawer Support Rail - Right Side

Henry from Newbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

14 of 16 people found this instruction helpful.

Was this instruction helpful to you?

broken crisper drawer and frame

the parts were exactly right and fit perfectly. they came quickly and arrived in great shape. I simply removed the broken pieces and replaced them with the new plastic frame to hold the crisper pans and the new pan.

Parts Used:

Crisper Pan Cover

Crisper Drawer

Catherine from Pasadena, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

18 of 29 people found this instruction helpful.

Was this instruction helpful to you?

The ends broke from the rails.

I unscrewed the old rails and took the number to order on the first day. The order came on the 3rd day. Can you imagine such fast service.
My daughter is a single mom with 4 children, one of whom was responsible for the breakage. I am the grandmother and was very grateful for the fast service and great price. The drawer was installed in 10 minutes. I just screwed the old screw into the new part and replaced the drawer. Thanks

Parts Used:

Drawer Support Rail - Right Side

Drawer Support Rail - Left Side

Maria from Sault Sainte Marie, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

12 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Leaky Seal

Just snaps in. Pull the old one out push the new one in. It has a groove it fits into no fasteners to undo, Just pull the old one out with steady pressure.

Parts Used:

GASKET-Freezer DOOR

Travis from Tecumseh, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Leaking Door Gasket

Open door remove old gasket, remove new one out of packaging install new gasket

Parts Used:

Refrigerator Door Gasket

Ulrich from Ontario, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 18 people found this instruction helpful.

Was this instruction helpful to you?

the rail broke on the meat drawer holder

I removed the shelf that hold's the rail's then one (1) screw that hold's the rail in place then I replaced the shelf. Simple & Easy!!

Parts Used:

Drawer Support Rail - Right Side

Geronimo from McAllen, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

refrigerator door would not fully close

Took old gasket off and put new gasket into place. Part came in the mail in 2 days. Hardest part was finding the model number of the refrigerator.

Parts Used:

Refrigerator Door Gasket

Elizabeth from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

The Gasket was not holding tight and I replaced with a new one.

Just like you showed on you tube.

Parts Used:

Refrigerator Door Gasket

Kebreab from NASHVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Coming from the refrigerator, there was an intermittent "clicking noise", occurring about every 30 seconds. The frig. eventually failed .

I removed the back cover and removed the clip holding the compressor- run capacitor and start relay. I replaced these 2 components and clean the dust from the frig., and from the bottom of the floor. I replaced the back cover ; Loss about $300 worth of meat when when the frig. failed. Then I thought that, during these turbulent times, there are many which don't have a refrigerator or any meat to place in it, The refrigerator is "running" normal again.

Parts Used: