FFHT1621TW1 Frigidaire Refrigerator - Instructions

As others have noted: this is an easy repair. I spent more time clearing all of our containers of yogurt that the actually "repair."

This is a good opportunity to clean the glass shelf and so I did that after removing it. Unscrewed the back support screw, removed old rail, and installed new one. (I just used the old screw as it seemed to be in good shape).

Took longer to clear the top shelf to remove it from the refrigerator to do the repairs. Super easy!

the repair was simple but the real story was the easy to read blow up diagram of the refridgerator after I entered the model no. Everything was numbered and I new exactly what I was ordering.
I will definatley buy here again.

Removed shelf, inverted it, removed broken part (one screw), installed new shelf rail.

Piece of cake.

Unscrewed the screw that held the suport rail to the shilf and changed the rail. Then I screw in the new rail.

first i removed the screw from the back of the shelf then pulled the old rail off. I sliped the new rail onto the post then replace the rear screw.

I Removed the old broken piece and replaced it with the new drawer support, using the screwdriver it was a very simple operation.

Repair was quite easy. Simply remove screw and replace part. My repairman charges a min. fee of $99 to come by. I did this myself and saved an easy $100! The part came very quickly--next day after I ordered it. Would definitely do this again.

I unscrewed the old drawer support and screwed the new one in. It was very simple!

It was easy. I handed it to my husband.

First, remove shelf unit from refrigerator and lay glass side down on a large flat surface. Observe, then pay attention to assembly. Spent more time with this, drinking coffee, and playing with puppy, than the actual repair. Only had to remove and replace two
phillips head screws. Replace deli - meat drawer after shelf unit is in place in refrigerator. Check for clearance for door to close.

removed shelf. took out screw. replaced support

Very, very easy problem to fix. I took the shelf that the support rails were attached to out of refrigerator. Unscrewed broke piece and screwed in new support rail and simply slid shelf back into refrigerator. Ta~Da! If I can do it, you can do it!

The first thing I did was to remove all the food from the shelf above the drawer. I removed the old support rail that is attached at the rear of the shelf by one phillips screw. I installed the new support and secured it. Partselect was a great place to purchase the part and they shipped the part quickly.

Open the door and slide on the part. No Tools required