DE22CS Maytag Dryer - Instructions

I "Youtube'd" the model number and "make" and followed the simple instructions. This job was very easy. The symptoms pointed to either the drum rollers or the idler wheel so I replaced both while I was in there. I was able to do all with one "four-way" screwdriver, and didn't have to move the dryer out. I used snap ring pliers to remove the drum roller snap rings, but that could of been done with fine needle nosed pliers. While I had the drum out I used my shop vac to give the inside a good cleaning. I put it all back together and plugged it in and we couldn't believe how quiet it was.

easily pried out the old catch. Removed one screw from the door, with pliers pushed the old striker out. Easily snapped the new catch and striker in place, then replaced the screw in the door. Done in about 5 minutes.