Models > DE22CS

DE22CS Maytag Dryer - Overview

Sections of the DE22CS

[Viewing 13 of 13]
Keep searches simple, eg. "belt" or "pump".
Drum Support Roller Kit – Part Number: 12001541
Drum Support Roller Kit
★★★★★
★★★★★
(170)
PartSelect #: PS1570070
Manufacturer #: 12001541
The drum support roller (Dryer Drum Support Roller, Drum Roller and Washer Assembly) holds the drum in the proper position while it spins on the support wheels. This part rotates on the roller shaft w...
$26.48
  In Stock
Tumbler and Motor Belt – Part Number: WPY312959
Tumbler and Motor Belt
★★★★★
★★★★★
(136)
PartSelect #: PS11757542
Manufacturer #: WPY312959
The tumbler and motor belt in your dryer allows the drum to spin during the drying cycle. At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. The belt is black in...
$31.48
  In Stock
Front Glide Kit – Part Number: 306508
Front Glide Kit
★★★★★
★★★★★
(33)
PartSelect #: PS1804752
Manufacturer #: 306508
The front glide is located at the front of the dryer, the drum rides along it. If you hear a metal-on-metal noise when your dryer is running, your front glide may be worn out and require replacing. Th...
$14.80
  In Stock
Roller Shaft – Part Number: WP6-3129480
Roller Shaft
★★★★★
★★★★★
(3)
PartSelect #: PS11743031
Manufacturer #: WP6-3129480
This roller shaft is also known as a support roller shaft or a drum roller axle, and is a part for your dryer. The function of this piece is to act as the axle for the drum roller; it provides a place...
$11.24
  In Stock
Blower Wheel with Clamp – Part Number: Y303836
Blower Wheel with Clamp
★★★★★
★★★★★
(79)
PartSelect #: PS2200270
Manufacturer #: Y303836
This comes with a metallic hub clamp to hold it firmly in place. The blower wheel with clamp is part of your dryer assembly. You will find this part attached to the drive motor shaft, which disperses ...
$22.20
  In Stock
Lint Filter – Part Number: WP33001003
Lint Filter
★★★★★
★★★★★
(68)
PartSelect #: PS11741039
Manufacturer #: WP33001003
This lint filter is a genuine OEM replacement filter for your dryer. Replacing it is easy as it just slides in like your normal filter. Make sure to check the filter slot for excess buildup of lint, a...
$24.56
  In Stock
Retaining Ring – Part Number: WP9703438
Retaining Ring
★★★★★
★★★★★
(3)
PartSelect #: PS11746909
Manufacturer #: WP9703438
This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter....
$6.92
  In Stock
Drum Roller Shaft Washer – Part Number: WP312535
Drum Roller Shaft Washer
★★★★★
★★★★★
(1)
PartSelect #: PS11740748
Manufacturer #: WP312535
If you notice that your dryer is noisy or will not tumble, then you may need to replace the drum roller shaft washer. This drum roller shaft washer is just under an inch in diameter and is sold indivi...
$13.36
  In Stock
Idler Pulley Shaft Washer – Part Number: WPY312527
Idler Pulley Shaft Washer
PartSelect #: PS11757538
Manufacturer #: WPY312527
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
$13.35
  In Stock
Idler Pulley Wheel – Part Number: WP6-3037050
Idler Pulley Wheel
★★★★★
★★★★★
(6)
PartSelect #: PS11743028
Manufacturer #: WP6-3037050
This part is used to help the belt to rotate the drum. It is white and made of plastic with a metallic bearing in the center.
$19.24
  In Stock
Door Switch Kit – Part Number: W10169313
Door Switch Kit
★★★★★
★★★★★
(19)
PartSelect #: PS1964648
Manufacturer #: W10169313
This part replaces two terminal switches in a dryer and prevents the dryer from running when the door is open. This includes two connectors. If your dryer will not shut off, start, or does not tumble,...
$29.32
  In Stock
Door Latch Kit – Part Number: 306436
Door Latch Kit
★★★★★
★★★★★
(15)
PartSelect #: PS2029855
Manufacturer #: 306436
This is a door latch kit, but you may also know it as a door catch kit. It is designed for your dryer. This part helps hold the door shut on your appliance. This dryer door latch kit comes in two piec...
$7.64
  In Stock

Questions And Answers for DE22CS

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the DE22CS

[Viewing 12 of 12]
Noisy
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Will not shut off
Fixed by
these parts
Show All
Shakes and moves
Fixed by
these parts
Show All
Timer will not advance
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
noisy rollers, broken latch
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job.
Thank you.
Parts Used:
Door Latch Kit Drum Support Roller Kit
  • gerry from west covina,, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable), Wrench set
630 of 655 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The blower fan (nylon) stripped off the motor shaft (steel)
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years.
Parts Used:
Blower Wheel with Clamp
  • Stephen from Lafayette, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
558 of 561 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
electric dryer was rumbling - wheel or belt?
Unplugged dryer. Front came off easily. Removed front of blower. Wheel came off fairly easily - could then see that shaft of motor was circular with flattened side but inside of old wheel was rounded. New wheel popped right on. Took tumbler off so I could clean lint out more easily and get a good view of how the belt threaded through. Put the tumbler back on and reached back with both hands to thread it. Took a half dozen tries until I was sure it was seated correctly and not twisted. Put front... of dryer back on. So far (a week or so) the rumble is gone. Seems blower wheel was the cause of the rumble. Belt didn't seem worn but replaced anyhow.
Parts Used:
Tumbler and Motor Belt Blower Wheel with Clamp Lint Filter
  • Raymond from West Bend, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
588 of 691 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!