Models > CGLES389FS2 > Instructions

CGLES389FS2 Frigidaire Range - Instructions

All Instructions for the CGLES389FS2

Broken Bracket On Element Control

Turned off power to oven. Pulled control dial from each element control. Removed plactic nut from each control and removed panel. Marked all connectors to "duel element control" for easy placement on new control unit. Replaced panel and installed plactic nuts. Replaced oven lamps and reinstalled the glass bulb covers. Turned power back on and tested element control that was replaced. Tested oven lamps by opening oven door. Everything went well.

Parts Used:

Dual Element Control with Potentiometer

Light Bulb

Daniel from Taylorsville, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

Oven would not reach temperature

Husband made install in very short time. Nice to have them back in operation.

Parts Used:

Door Seal

Temperature Sensor

Sandra from Magnolia, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Oven had little or no heat when turned on

Third time was a charm. Following PartSelect repair percentages I first replaced the oven sensor which did not fix problem. Next I replaced the main terminal block and oven baking element. Again , this did not fix problem. Lasty I replaced the oven electronic clock/ timer and the oven started working properly.

Parts Used: