Broil Element 318255605

Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS3633414. This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts. Hope this helps!

Hello Kenneth, Thank you for writing. The replacement baking element for your model is under PartSelect number PS1992188. Hope this helps!

Hello Pierre, Thank you for the question. The distance between the screw holes is about 2". We hope this helps!

Hello Chris, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. We hope this helps!

Hello and thank you for writing. This is a screw type style element. We hope this helps. Please contact us anytime if you require further assistance.

Hello Mark and thanks for writing. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need. Inglis +1 888-738-5078

Hello Saundra, thank you for writing in. The Bottom Element is specific to Baking and is part PS978774. The Upper Element is specific to Broiling and is part PS3506411. We hope this helps.

Hello, Thank you for your question. If the unit is not working after a self clean cycle typically the electronic control board is no longer functioning properly. -Part #: PS1149637. We hope this helps.

Hello Edward, Thank you for the question. This Element is showing in stock and available. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Warren, thank you for your question. Before replacing the broil element, check for continuity with a multimeter. Steps: 1- Ensure that the appliance is disconnected from the power source before beginning. Locate and inspect the element’s terminals. 2- Access them by removing the back panel of your oven. Inspect for signs of overheating or damage. 3- If you find no issues, remove the element from your range to test it. 4- Touch the element’s terminals with the probes using a multimeter on the Rx1 setting. The reading of a functional element varies between models but will probably fall between 19 and 115 ohms. To find what reading a functional element from your model will produce, check your owner's manual. 5- If your element does not have continuity or is visually damaged, you will need a replacement broil element part number PS3506411. If you require assistance to place an order, please contact customer service. We hope that helps!