EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > CG200L > Instructions

CG200L Jenn-Air Cooktop - Instructions

All Instructions for the CG200L
91 - 105 of 137
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
old yucky filter
Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!
Parts Used:
Range Grease Filter
  • Diane from Flower Mound, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace old dingy part
Part provided quickly and accurately
Parts Used:
Burner Grate - Black
  • Henry from Vancouver, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace the grease filter!
Followed the directions. Piece of cake!!
Parts Used:
Range Grease Filter
  • Colette from Annapolis, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rotten filter for down draft vent
How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!
Parts Used:
Range Grease Filter
  • Craig from Ashburn, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Downdraft switch on the top of the JennAir inkoperative.
I verified that there was current running to the switch.
Ordered a new switch,
Replaced the switch.
Had a little problem getting the oneway washers off the pegs but not much.
Saved the cost of a repair man and felt good about myself!
Parts Used:
Fan Switch Kit
  • Daniel from Fort Walton Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The paint had chipped and peeled on the inlet grill
I lifted off the old grill and replaced them with the new ones. My stove top looks great again. If I could find them, I would like to replace the knobs to turn on the gas!
Parts Used:
Vent Cover - Black
  • Ann from Irvington, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn out burner grates
Lift and replace. This was the only web site that gave a picture with the correct size of the grates I was looking for. All the other sites gave approximate sizes and universal part numbers instead of the vendor part number. That is why I bought it here. I didn't want to have to return the product because it was off just a bit.
Parts Used:
Burner Grate - Black
  • Richard from Omaha, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
burner knobs were melted beyond repair.
Replaced the old knobs with the new ones.
Parts Used:
Surface Burner Knob
  • Thomas from Tucson, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replace Grill Side with Burners because I never used the Grill
Very simple remove the Grill section and install the Burners no reworking of existing Unit is required
Parts Used:
Range Burner Bracket (Black) Double Burner Pan - Black Rear Burner Front Burner Burner Grate - Black Dryer Screw
  • Don from Scott, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The Burner Grates were old and bent out of alignment.
The repair was as easy as could be. We simply lifted off the old burner grates and set the new ones in their places.
Parts Used:
Burner Grate - Black
  • Carl from Fairfax, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broke original Knob
Hardest part of repair was ordering part. The knob arrived the day after my placing order. Not rocket science to replace burner knob.
Parts Used:
Surface Burner Knob
  • Robert from Tracy, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replacement
This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,
Parts Used:
Range Grease Filter
  • Barb from Holladay, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Burner knob replacement
Inserted new knob on to the stem... very difficult operation taking a great amount of skill. ;-)
Parts Used:
Surface Burner Knob
  • Peter from Foster City, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Need Knobs For Electric Stove-Top
I did not have the model number and thought I picked the correct knob by the picture. I sent back the knobs and one of my knobs to see if the company can match.
Parts Used:
Surface Burner Knob
  • JUDY from HACIENDA HEIGHTS, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
old burners wouldn't light
took old burners out, installed new ones . I was very easy and if i could do it anyone can. I used a rachet and thats the only tool i needed
Parts Used:
Range Front Burner Assembly Black (Glossy Finish) Rear Burner
  • BOB from hartford, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CG200L
91 - 105 of 137