All Installation Instructions for Jenn-Air Cooktop C101-C

The paint begin popping of my original grill. My son had a friend that said that he could remove the old paint and repaint for me. Unfortunately in the shuffle of a motorcycle performance shop the grill was lost. I have been trying to get help from Jenn-Aire since March and they just kept saying th

Very simple for me!!! Open the box, uncover the new grill and lay it in its place.

Thank you so much!

Parts Used:

Vent Cover - Black

Norma from Salisbury, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Numbers on original stove top had become unreadable due to age and needed to be replaced

I originally ordered the knobs that appeared to be an exact match for the ones on the stove top (Part # PS1515077). However those knobs are designed to fit on D post stems. I finally ordered PS48861 which are designed to fit double flat post stems which is what I have on my stove top. New parts fit perfectly. Remove old knobs put new ones on. Total repair time less than one minute. Part Select was great about getting the original parts and replacement to me quickly.

Parts Used:

Surface Burner Knob

James from Montclair, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

rotten filter for down draft vent

How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!

Parts Used:

Range Grease Filter

Craig from Ashburn, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Bad switch

As stated on order.

Parts Used:

Surface Unit Infinite Switch Kit

Merwyn from Kingsport, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

old yucky filter

Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!

Parts Used:

Range Grease Filter

Diane from Flower Mound, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The stem of one of my burner switches broke off so I had to replace the switch.

Replacing the switch was very easy. First I unplugged the range to be sure there would be no electrical power to the switch. Then I removed four screws to remove the switch cover plate (located above the oven door). I disconnected the wires from the pin connectors on the broken switch, then removed the switch by removing one hex nut. The new switch was installed by reversing the removal procedure. Took about 15 minutes total time.

Parts Used:

Surface Unit Infinite Switch Kit

John from Fulton, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Wife left burner on

Replaced switch.

Parts Used:

Infinite Switch

Alan from Alpine, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

uneven/intermittent burner heating

shut circuit breaker, remove two screws, lift knob panel, move wires to new switch, remove and replace switch, clean surface

Parts Used:

Surface Unit Infinite Switch Kit

Kelly from Alameda, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

front burner would only work on high

Installed the part------very easy

Parts Used:

Surface Unit Infinite Switch Kit

william from cairo, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

burner switch would only stay on hi

Replaced the switch.

Parts Used:

Infinite Switch

David from Willow Grove, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The paint had chipped and peeled on the inlet grill

I lifted off the old grill and replaced them with the new ones. My stove top looks great again. If I could find them, I would like to replace the knobs to turn on the gas!

Parts Used:

Vent Cover - Black