Maytag/Maytag_Thumb/33390.gif
See part 2 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Infinite Switch

★★★★★
★★★★★
4 Reviews
$61.43   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12347302
Manufacturer Part Number W11120795
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Cooktop, Range.
This part works with the following products:
Jenn-Air, Kenmore, Maytag.
Part# W11120795 replaces these:
AP6278041, 570095, 703147, W10894487, WPY703147, Y703147
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
July 12, 2019
Is w11120795 it’s the same part?
For model number 203147
Hello Greg, Thank you for the question Yes, the PartSelect Number PS12347302 is the same as the Manufacturer Part Number W11120795. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Hector
January 7, 2020
Infinite switch no ps12347302,does it have a shaft in d-shape for my knobs to fit on it.
For model number C201-C
Hello Hector, Thank you for the question. The PartSelect Number PS12347302 has a Double Flat Shaft. We hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Glenn
February 21, 2020
Infinite switch just arrived! Part # w11120795. It is not the same as the switch illustrated in the picture. The original is a 5 terminal one and the newly arrived one is a 6 terminal. Is this a redesigned switch and if so how does it get wired?
For model number C221-C
Hello Glenn, Thank you for your question. The switch has been redesigned for your model, but the wiring will be the same as the original was wired, the 6th terminal will just be left untouched for the switch to work. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Sally
21 days ago
Does the infinite switch W11120795 have D shaped shaft or a double flat shaft?
For model number C301
Hello Sally, Thank you for the question. This is a double flat shaft switch. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Hector
January 7, 2020
Is the infinite switch n0 ps12347302, at $58.97 is a push and turn switch.
For model number C 201 c
Hello Hector and thank you for writing. Yes, it is. You push and then turn. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Enrique
January 14, 2020
When i turn on the knob, i do not feel the turning resistance of the infinite switch, the red light does not come on and the coil does not warm up. Is it fair to assume the infinite switch needs changing? When i change the panel to the other side everything works accordingly.
For model number C221-C
Hi Enrique, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Michael
February 19, 2020
Should i use switch part number ps12347301 or switch part number ps 12347302 to replace the selector switch for my jenn air model c228 cooktop. The shaft for the switch broke when removing the knob
For model number C228
Hello and thank you for writing. The infinite switch part # PS12347302 is in the list of compatible parts for your model number. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Steve
September 3, 2019
Infinite switch failed on right rear (small plate). Replaced with a used switch and now plate heats slowly but barely warms. Front right and both left work normally. Whats the problem?
For model number c203
Hello Steve, Thank you for the question. This sounds like an issue with the used switch. I recommend having it replaced with a new one. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bonnie
September 18, 2019
I am unable to turn the burner off. I turned it on, cooked with it, but i could not shut it off.
For model number C301
Hello Bonnie, thank you for writing. You will want to replace this Infinite Switch, part number PS12347302 for your model. Good luck with your repair!

Was this helpful?
Thank you for voting!
Susan
January 4, 2020
When we turn on the front burner the back burner turns on high.
For model number C221 Jennair cooktop
Hi Susan, we would recommend to get a service technician to diagnose this or contact the manufacturer directly. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 24 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Burner Switch Broke were Knob attached
First I cut off power supply, removed screws that held panel on, pulled the switch up and disconnected wires. Installed new switch, being sure to connect wires in the correct places. Refastened panel to stove top. Turned power back on and tested switch and it Worked.
  • Malcolm from White House, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
  • Parts Used:
    W11120795
34 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Infinite switch ran more than one burner
Purchased 1 infinite switch and installed it on the left front burner. problem still there so I used the switch that I replaced on the rear burner and all was ok. The front switch had been sending full heat to the rear burner,but the problem ended up with the rear switch. The switches are interconnected and all are the same part number.Diagrams on partsselect were the key to a successful repair.To access the switch you need only to remove the fan cover, remove the 2 screws holding the switch assembly and move it foreward and then lift to reveal slide on connectors. Power to the unit is off at the main panel during the entire process.
  • Stephen from Andover, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W11120795, WPY702434
30 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan switch stiff and shorted burner control, scratched up escut plate
1st-turned off power to stove top, then removed 2 screws to loosen the control panel. 2nd- I removed the shorted infinite switch by using a pliers to loosen the nut holding the burner in place, undid the electrical connections (noting where each was attached to the old control) and reattached them to the new control. Then I undid the nut holding each of the other 3 burner controls, detached the wires to the old fan switch, reattached the wires to the new fan switch, i removed the red idiot lights (by moving them sideways) from the escut kit. I then reattached everything to the new plate, secured the panel to the stove top, turned the juice on, And it worked as it should, and the new plate made the stove top appear almost new. 30 minutes.
  • Donald from Bloomington, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    12200055, W11120795, 12001130
25 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two heating elements couldn't be controlled - full on
Turned off power.

Removed two screws to free up section of cooktop containing 4 switches - 2 good, 2 damaged. Removed the dials from top of the 2 damaged switches. With an adjustable wrench, loosed nut on stem of switch that fastened switch to assembly. Noted which of the 5 wires on each switch went on which tab. Pulled off 5 wires on one switch, finished removing the nut and removed broken switch. Put in new switch, attached the nut, and replaced 5 wires in exactly the same position, Tightened nut. Replaced dial. Repeated procedure for second switch. Placed section containing the 4 switches back on cooktop and inserted/tighted 2 screws holding it in place.

Turned on power.

Told cleaning people to NEVER put aluminum foil under the burner units again. The foil shorted across the power and damaged the switches.
  • Lansing from Alamo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
  • Parts Used:
    W11120795
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dead element; broken switch shafts; light out
This was a piece of cake since the parts were a perfect replacement. I took the element apart and replaced the two receptacles by cutting the old wires and using the included wire nuts to splice the wires. The two switches were easily replaced by carefully connecting the wires like they were hooked up on the old switches. The indicator light was also easily replaced, although snapping the lens into place seemed to take a lot of force (I was afraid that I might break it). All in all, quite easy.
  • Robert from Gainesville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
  • Parts Used:
    W11120795, 715396K, 12001676
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control switch broke off at the knob
My husband actually did the repair and it went very smootly. He removed the palnuts on all switches even though we were only replacing one switch. Then removed the two screws to the switch cover, and slide the cover up to expose the switches. He then took off one wire at a time from the old switch and replaced it one the appropriate place on the new switch. Exteremely easy repair and thank goodness because I (his wife) was the one who broke the switch. Thanks PartSelect!!
  • Deborah from Newburg, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not work
changed out switch
  • Johnny from Azle, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
  • Parts Used:
    W11120795
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All four of the cooktop switch controls needed replacing since none would control their respective burner.
Turned off the power at the circuit breaker panel. Removed the control knobs from each switch and the four palnuts under each knob. Removed the two screws inside the vent well that hold the escutcheon in place. Pulled each switch up as much as possible to expose the wires attached underneath to each switch blade. Remoced each wire and replaced them on the new switch. Same procedure for all four switches. Reassembled in reverse order. Turned on power and all four burners lit up and were regulated as if new. I saved $244.00 doing the repair myself.
  • William from Williamsbirg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
  • Parts Used:
    W11120795
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Infinite Switch failed, burner would not heat
Removed two screws holding 4-switch panel, drew a simple diagram to assure placement of wires on correct terminals, removed and replaced switch.

Switch works fine, but original knob does not fit shaft of replacement switch. Will try to order new knob, but it probably won't match the old knobs, so range will have one new knob & three old ones. I wish the order page noted that new knobs must be ordered to fit the new style shaft.
  • John from Temecula, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    W11120795, WPY700631
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two burners had failed to work properly. Always went to full heat.
I first removed power from the stove at the breaker panel. Next, I used the assembly diagrams provided by the parts select website to determine how to open up the stove panel. I opened the oven door to access the four screws holding the front panel holding the knobs. I removed the screws and was able to tilt up the front panel to allow access to the four burner switches. It was easy to swap out the wires on the old defective switch to the new replacement switches. I replaced both defective switches in 15 minutes and tiled the front panel back down into its normal position and put the four screws back into the panel to secure it. Then I turned on the breaker and did a check to see that the parts I replaced were working properly. They were and the total repair time was around 30 minutes without rushing at all.
  • Lark from Mill Creek, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
  • Parts Used:
    W11120795
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
2.3
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    2
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS12347302
      Manufacturer Part Number: W11120795
      Brand
      Model Number
      Description
      Jenn-Air
      22001
      Cooktop - Electric
      Jenn-Air
      22112
      Cooktop - Electric
      Jenn-Air
      22113
      Cooktop - Electric
      Jenn-Air
      22114
      Cooktop - Electric, Updraft
      Jenn-Air
      22115
      Cooktop - Electric, Updraft
      Jenn-Air
      22116
      Cooktop - Electric
      Kenmore
      22302
      Range - Kenmore Range/Stove/Oven Model 22302(1988) Parts
      Kenmore
      22303
      Range - Kenmore Range/Stove/Oven Model 22303(1988) Parts
      Jenn-Air
      22305
      Cooktop - Electric
      Kenmore
      22306
      Range - Kenmore Range/Stove/Oven Model 22306(1988) Parts
      Kenmore
      22308
      Range - Kenmore Range/Stove/Oven Model 22308(1988) Parts
      Kenmore
      22309
      Range - Kenmore Range/Stove/Oven Model 22309(1988) Parts
      Jenn-Air
      22401
      Cooktop - Electric
      Kenmore
      62922001
      Cooktop
      Kenmore
      62922112
      Cooktop
      Kenmore
      62922113
      Cooktop
      Kenmore
      62922114
      Cooktop
      Kenmore
      62922115
      Cooktop
      Kenmore
      62922116
      Cooktop
      Kenmore
      62922401
      Cooktop
      Jenn-Air
      C101
      Cooktop
      Jenn-Air
      C101-C
      Cooktop - Electric
      Jenn-Air
      C102
      Cooktop - Electric
      Jenn-Air
      C201-C
      Cooktop - Freestanding, Electric
      Jenn-Air
      C202
      Cooktop
      Jenn-Air
      C202-C
      Cooktop - Freestanding, Electric
      Jenn-Air
      C203
      Cooktop - Electric
      Jenn-Air
      C203-C
      Cooktop - Freestanding, Electric
      Jenn-Air
      C221
      Cooktop
      Jenn-Air
      C221-C
      Cooktop - Electric

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service