All Installation Instructions for Frigidaire Dryer BAQE7073KW0

Door would not close because of broken female latch.

Very simple. I removed the broken latch with pliers and snapped in the new one in less than 5 minutes.

Parts Used:

Door Catch

Raymond Frattone from Richboro, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

latch broken

pulled out old catch with old pliers and popped new one, simple.

Parts Used:

Door Strike

Door Catch

Lukas from Pasadena, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

Shreking noise when turning on, then loud noise from dryer, after a few minutes it would not be so loud but louder than normal.

Replaced everything on the dryer till I got the right problem, seriously, I now have a new dryer in an old body, still came out alot cheaper than buying a new one. I listened to every sound on youtube but none sounded like my dryer.

Parts Used:

Blower Housing with Blower Wheel

joan from Roanoke, AL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

The door safety or something needed replaced.

I called a wonderful friend who diagnosed the problem; ordered the repair part; and fixed it!!!

Parts Used:

Door Switch - 3 Wire

jane from blairsville, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

Dryer was not drying completly.

I replaced the Control Thermistor (part # PS1149368) by removing the two screws on the bottom of the lower panel below the door. You will see the Control Thermistor just below and to the left of the discharge chute. Remove the two screws holding the Control Thermistor in place. Disconnect the two wire and reconnect to new Control Thermistor. Replace screws in reverse order of above.

Parts Used: