Models > BAQE7073KW0

BAQE7073KW0 Frigidaire Dryer - Overview

Sections of the BAQE7073KW0

[Viewing 7 of 7]

Manuals & Care Guides for BAQE7073KW0

Click to download
Keep searches simple, eg. "belt" or "pump".
Door Catch – Part Number: 131658800
Door Catch
★★★★★
★★★★★
(18)
PartSelect #: PS418433
Manufacturer #: 131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, which allows the door...
$58.17
  In Stock
Order within the next 4 hrs and your part ships today!
High Limit Thermostat – Part Number: 3204267
High Limit Thermostat
★★★★★
★★★★★
(2)
PartSelect #: PS446428
Manufacturer #: 3204267
This high limit thermostat is used in a dryer and monitors the temperature to make sure it does not exceed 260 degrees Fahrenheit. When your dryer temperature reaches 260 it will cut it out and only c...
$85.14
  In Stock
Order within the next 4 hrs and your part ships today!
Door Strike – Part Number: 5303207102
Door Strike
★★★★★
★★★★★
(7)
PartSelect #: PS455020
Manufacturer #: 5303207102
The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. This is a simple repair...
$21.75
  In Stock
Order within the next 4 hrs and your part ships today!
Blower Housing with Blower Wheel – Part Number: 131775600
Blower Housing with Blower Wheel
★★★★★
★★★★★
(14)
PartSelect #: PS418726
Manufacturer #: 131775600
***Please Note: This part is a substituted part by the manufacturer. It may appear different, but should still work with your appliance.
$122.08
  In Stock
Order within the next 4 hrs and your part ships today!
Screw – Part Number: 131302800
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$24.35
  In Stock
Order within the next 4 hrs and your part ships today!
SCREW – Part Number: 131168200
SCREW
PartSelect #: PS417085
Manufacturer #: 131168200
Sold individually.
$25.42
  In Stock
Order within the next 4 hrs and your part ships today!
Control Thermistor – Part Number: 134587700
Control Thermistor
★★★★★
★★★★★
(2)
PartSelect #: PS1149368
Manufacturer #: 134587700
This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating. This part is located in the blower housing.
$45.35
  In Stock
Order within the next 4 hrs and your part ships today!
High Temperature Adhesive – Part Number: 5308027429
High Temperature Adhesive
PartSelect #: PS474458
Manufacturer #: 5308027429
This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before apply...
$52.32
  In Stock
Order within the next 4 hrs and your part ships today!
GASKET – Part Number: 137553402
GASKET
★★★★★
★★★★★
(8)
PartSelect #: PS8689127
Manufacturer #: 137553402
This is a gasket, but you may also know it as a door seal, for your dryer. This part prevents heat loss during a drying cycle by keeping the area around the door sealed. This gasket is all black, and ...
$63.24
  In Stock
Order within the next 4 hrs and your part ships today!
Lint Filter - White – Part Number: 134701410
Lint Filter - White
★★★★★
★★★★★
(5)
PartSelect #: PS2363394
Manufacturer #: 134701410
$61.43
  In Stock
Order within the next 4 hrs and your part ships today!
Door Switch - 3 Wire – Part Number: 134813601
Door Switch - 3 Wire
★★★★★
★★★★★
(5)
PartSelect #: PS2330880
Manufacturer #: 134813601
This switch is for a dryer door with a drum light.
$20.70
  In Stock
Order within the next 4 hrs and your part ships today!
Thermal Fuse – Part Number: 137032600
Thermal Fuse
★★★★★
★★★★★
(2)
PartSelect #: PS2349395
Manufacturer #: 137032600
$46.23
  In Stock
Order within the next 4 hrs and your part ships today!

Questions And Answers for BAQE7073KW0

Be the first to ask our experts a question about this model!

Common Symptoms of the BAQE7073KW0

[Viewing 10 of 10]
Door won’t close
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Will not shut off
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door Latch & Door Strike Broken On Dryer
I removed the broken door latch & strike with pliers. Then I pushed the new parts into place
Parts Used:
Door Strike Door Catch
  • Bruce from Seminole, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
40 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My husband ruined the old latch by trying to shut the door too hard, and the old latch fell down into the inside of the dryer.
I took the new latch out of the package and snapped it into place. It took about 15 seconds, and that included the walk to the laundry room!
Parts Used:
Door Catch
  • Michelle from Dallas, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
27 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy Dryer
When I described the noise to a YouTube appliance diagnostician, I was directed to check the felt seals front and back of the rotating drum for wear, tears, or foreign objects. As it happens the felt seals looked find and there were foreign objects so, not wanting to disassemble and reassemble the dryer more than I had, I ended up replacing all the replaceable moving parts that I considered possible culprits: The idler tension spring, the idler tension bracket (which includes a nylon pulley wheel), the drum belt, the five rubber-tipped bearings that support the drum and keep it in place, and the foam seal on the blower housing which seemed a little brittle and old, as well as high-temperature adhesive for the latter. The instructional videos here and on YouTube were extremely helpful (I doubt that I would have attempted this job at all, had I not watched these ahead of time). The most time-consuming aspect was waiting for the arrival of the parts as I didn't order them all at the same time or all from the same place (I ordered from whomever could ship me a given part the fastest. Disassembly took less than an hour. Re-assembly with the new parts in place took about the same but was a little more awkward because this appliance sits in a very narrow closet and it's difficult to ensure that the 4" flexible duct stays in place when sliding the appliance back into the closet. No regrets. Now I know the basics if this dryer needs attention in future and I also know all the parts that I can eliminate as suspects in any future maintenance (the parts that I replaced)
Parts Used:
Belt ROLLER KIT
  • Philip from Oakland, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
25 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!