All Installation Instructions for Amana Microwave AMV1150VAS2

light bulb burned-out

screwed in new bulb

Parts Used:

Light Bulb - 40W

Pablo from Burlingame, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

13 of 34 people found this instruction helpful.

Was this instruction helpful to you?

glass turn table cracked needed a new one

easy to replace, just the same as cleaning the turntable and placing back in the micorwave;

Parts Used:

Glass Cooking Tray

sharon from LAS VEGAS, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

broken glass tray

Washed the glass tray and put in the microwave oven. Easy..

Parts Used:

Glass Cooking Tray

Mary from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Exterior light bulb (PS2376034) broken off in socket. No access for pliers after glass cover removed.

Unplug appliance. Remove total of 7 phillips screws from sides and front of bottom panel . Panel front drops down, remove one socket screw and socket. Now have access for lineman' s pliers to unscrew bulb base. Reinstall socket, replace bulb and 7 panel screws. Restore power.

Parts Used:

Light Bulb - 40W

Alvin from HILTON HEAD, SC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

glass turntable broke in half, ring turn needed replaced

I removed the broken tray and ring-turn and replaced it with the new
Service was fantastic, parts were ordered one day and received the next

Parts Used:

Microwave Turn Ring

Gail from Cincinnati, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Wrong mounting plate

Two Mounting plates # PS12074431 were sent to me and both do not fit.
Model number MMV1175JZ-0
Serial number TRX-17. 24546
Manufactured April 2020
Contacted Maytag and even sent pictures to show the problem with alignment of the mounting plate not fit in the back of the microwave.

Parts Used:

Mounting Plate

TEMPLATE

Theodore from SEBRING, FL
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

light bulb burnt out .

Turn off power supply at breaker . Replace old bulb with new bulb .

Parts Used:

Light Bulb - 40W

DAN from CARPENTERSVLE, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Range light bulbs were burned out

We needed a phillips head screw driver to remove the single screw holding the light bulb cover in place.
Removing the old bulbs was a little work, because they had come loose from the sockets. We unplugged the microwave, so we could grip the sockets with a tool. I think my husband used a needle nose plier for this.
The new bulbs screwed in easily, and then we refastened the light bulb cover with the phillips head screw driver.

Parts Used:

Light Bulb - 40W

Barbara from MERIDIAN, ID
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Screw broke out.

Put into place, tightened the screws.

Parts Used:

Vent Grille - Black

Judy from Marietta, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Turntable coupling

Rep knew exactly what I needed when I described where the part should go on my microwave - price great - shipping great - installed in seconds. Thank you!

Parts Used:

Drive Coupling

Laura from Port St Lucie, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Burned out light in microwave

Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.

Parts Used:

Light Bulb - 40W

DANNY from SAINT JOHNS, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

I had a cabinet person install new kitchen cabinets and counter top. After the demolition of the the old cabinets, I had to buy new parts for the new instal

I had the help of a handyman, I'm 75 years young but not handy with tools

Parts Used:

Mounting Plate