6845 - Instructions

unscrew 2 screws, pull 2 connectors off, put in new part in reverse order - easy fix.

Removed back of stove (6 screws), puled clips loose. Two screws inside oven, pulled out old element. slid new one in, replaced screws, slid on clips replaced back panel. Don't forget to unplug the stove frist.

Took out 2 screws pulled off the 2 female connectors. put the conectors on the new element and put the screws in. It took less than 10 minutes

This is the second time I have replaced the bake element. It looks like 8 years is about as long as they last under normal use. The repair was simple; remove 2 screws, pull the bake element out, disconnect the wire connected to each end of the bake element, then reverse the process to reinstall.

This was a snap. It took me longer to find the right part number than it did to make the repair. After securing power to the oven, I removed the racks. I then unscrewed the element supports and pulled the element out slightly to expose the connectors. Using a pliers I removed the connector from each side of the element. At this point, I should have placed a piece of electrical tape to prevent the connector leads from slipping back into the body of the oven. Instead, I fished them out with a tweezer, and slid the connectors back onto each side of the element. I then screwed in the elements supports, replaced the oven racks, and restored the power. It literally took less than 10 minutes.

Super simple. My husband ordered the part. It arrived in 3 days. The old element plugs right into cables on both sides of the back of the oven and are secured to the rear wall with screws. I unscrewed the plates, detached the wires on each side and slid the new ones in place. It was that easy and took me about 10 minutes.

. First I removed the two screws that hold the ace. I thenelement in place. I then pulled the element out about inches and disconnected the two wires...)

I unplugged the oven, sat the flash light in the oven and removed the two screws that hold the element in place. I pulled the element out and diconnected the two metal wire clasps from the element. Connected the new element, made sure the clasps were secured. Slid the wires back in and replaced the screws. Tested the oven, it heats up to correct temperature. I am a women and it was real easy thanks to the other repair stories I read.

Remove the bottom rack from the oven. Pull the heating element straight back and out of the oven. Inserted the replacement burner in the opposite manner. Part was delivered in a timely manner.

unscrewed the element and pulled it out, then put the new element in.

Removed two screws that attach bake element to rear of oven. Slid off blade type connectors at each end. Slid connectors onto new element. Pushed element into place and reinstalled two screws. Tested. Perfect. Took longer to do this survey than to do the repair! The one day shipping service was a big plus.

Removed old element (two screws) unclipped two wires. Clipped the two wires to the new element (one at each end), reinserted new element, replaced the two screws. Done. Oh, flipped the circuit breaker back on:-)

unscrewed the old baking element, took the yellow wire off, and put the yellow wire onto the new baking element and screwed it back onto the oven. Took less than 15 minutes.

We repalced the heating element n no time. Easy to do and the price couldn't be beat!

It was very easy to fix